• Animal Systematics, Evolution and Diversity
• /
• 제33권1호
• /
• pp.26-32
• /
• 2017

A new marine tardigrade species of the genus Orzeliscus belonging to the family Halechiniscidae is described from the sea coasts of Korea and Japan. This new species is most characterized in having slender, pole-shaped clava with uniform breadth along its whole length. Furthermore, it evidently differs from the congeners by the combination of characters of a hemispherical protrusion on cheek region of the head, a big and bulbous lateral projection between leg III and leg IV, and an elongate papillus terminating with a minute tube on leg IV. 'Orzeliscus cf. belopus' sensu McKirdy, Schmidt and McGinty-Bayly, 1976 from the Galapagos Islands quite resembles this new species in sharing the slender, pole-shaped clava. However, these two Pacific populations are distinguished to each other by body size and shapes of the protrusion on cheek region and the lateral projection between leg III and leg IV. Scanning electron microscope photographs and a key to species of the genus Orzeliscus are also provided herein.

• 대한조선학회지
• /
• 제20권3호
• /
• pp.17-20
• /
• 1983

There have been many investigations of predicting the added resistance of a ship in seaway since Havelock discussed this topic in 1937. Among these researches, Maruo's theoretical approach is known as the most consistent mathematical representation for added resistance of a ship in regular head sea. In his theory, the hull form of a ship is represented under the slender body approximation. But the motion responses which were used for the calculation of the added resistance have been obtained by using the strip method which is based on an approximation that the hull form may be expressed as set of two dimensional cylinder sections in longitudinal direction. Therefore two different methods for hull form representation were implicity used in Maruo's original work for the added resistance calculation. Utilizing the characteristics that hull forms are usually slender, Kan expressed the hull form as two dimensional cylinder at each station by using the Taylor series expansion for the length wise direction. Putting this idea into Maruo's original work, the added resistance can be obtained with the explicitly unique representation of the hull form. For the purpose of comparison the added resistance of a hull form(series 60, Cb=0.6) was calculated by using the motion response obtained by Shintani. The numerical result showes a good qualitative agreement with the experimental result by Sibul.

• 대한조선학회논문집
• /
• 제54권3호
• /
• pp.171-186
• /
• 2017

This paper introduces a study on ship performance in waves to consider the effects of added resistance in the early stage of hull-form design. A ship experiences a loss of speed in actual seaways, hence this study proposes the overall procedure of a new design concept that takes into account the hydrodynamic performance of ship in waves. In the procedure, the added resistance is predicted using numerical methods: slender-body theory and Maruo's far-field formulation, since these methods are efficient in initial design stage, and an empirical formula is adopted for short waves. As computational models, KVLCC2 hull and Supramax bulk carrier are considered, and the results of added resistance and weather factor for test models are discussed. The computational results of vertical motion response and added resistance of KVLCC2 hull are compared with the experimental data. In addition, the sensitivity analysis of added resistance and weather factor for KVLCC2 hull to the variations of ship dimensions are conducted, and the change of the added resistance and propulsion factors after hull form variations are discussed.

• 한국의상디자인학회지
• /
• 제11권1호
• /
• pp.29-41
• /
• 2009

The purpose of this study is to improve the fitness of clothes by producing patterns considering body proportions at a time of producing clothes for export through extracting factors comprising body types and conducting comparative analysis of proportions by body part using body indexes of Korean women in their 20s living in both Korea and foreign countries. The study results are as follows. Factor analysis by group was conducted for body indexes in order to examine body types of Koreans living overseas. As a results, six factors were extracted from all of three groups; Joseonjok(Koreans living in China), Goryeoin(Koreans living in Russia) and Korean residents in Japan, and their explanatory powers were 60.42%, 63.62%, 63.15%, respectively. Obesity factor was extracted as the 1st factor, and the groups showed differences in other factors. As a result of proportion comparison using body indexes of Koreans living in foreign countries and Korea, it was found that, in height item, when regarding the height as 100, the length of the lower part of the body was long in the order of Goryeoin. Joseonjok, Koreans living in Korea and Korean residents in Japan. Also in width item, when regarding the waist as a standard, it was observed that Joseonjok people have the shoulders, the breasts and the hips that look relatively wider comparing with the width of the waists because they have very narrow waists and the width between shoulder length is big. In addition, the study examined proportions of the breast thickness/the breast width, the waist thickness/the waist width, the hip thickness/the hip width to height. From the analysis, it was found that breasts of Koreans living in Korea are flattest while their waists are slender, and Goryeoin and Joseonjok have round body shapes from the waist to the breast.

• 복식문화연구
• /
• 제17권6호
• /
• pp.939-946
• /
• 2009

This study is to classify the shape of the body by means of the drop value of the middle-age women. Drop value is based on the circumstances of the body deciding the dimentions of the clothes. Therefore, the study based on the drop value seems to decided the measurement of the clothes in making mass production of ready made clothes. In order to put measure items on this study of the value on 'The fifth survey of body measure of Korean', select 785 people in middle-aged women aged from 40 to 59. And considering the characteristic of upper-drop and lower-drop, and swelling belly by accumulated fat, selected five items(Bust Circumstance - Waist Circumstance, Hip Circumstance - Waist Circumstance, Hip Circumstance - Bust Circumstance, Waist Circumstance(Omphalion) - Waist Circumstance, Hip Circumstance - Waist Circumstance(Omphalion)). The result of the study is summarized as follows. Type 1, M type of the body showed the distribution of 32.5% and belonged to low body development style. The line of human body is the nearest of the four bodies in middle-age woman out of whole shapes of 4 types and the line of human body is close to middle-age woman. Type 2, X type of the body showed the distribution of 40.8% and the line of human body remarkably showed. Type 3, H type of the body showed the distribution of 12.4% and the line of human body appears least. This group was larger than any other group in having more fat in the belly above the circumstance of the hip than other groups. Type 4, Y type of the body showed the distribution of 14.4%. This type was upper half of body development style, waist was slender, and there was seldom the bend around the circumstance of belly and hip.

• 한국의류학회지
• /
• 제32권5호
• /
• pp.821-833
• /
• 2008

The purpose of this study is to provide basic information about body proportion characteristics, and the level of body cathexis and fit satisfaction related to those characteristics. It is hoped that this will help to improve ready-to-wear satisfaction in middle-aged women. In order to achieve this purpose, the body proportion characteristics of middle-aged women were measured and were compared with that of standard and ideal body types. Then, the body cathexis and fit satisfaction according to these characteristics was analyzed. Finally, the following results were obtained. First, the average height of middle-aged women was 6.87 head, waist length was 58.9% of height, and knee length was 25.6% of height. In frontal appearance, the hip width, shoulder width, and chest width were wider than waist width(24%, 20%, and 11% respectively). Chest and hip depths was thicker than waist depth(19% and 17% respectively). Second, in lengths proportion, their lower body was shorter than the standard body shape for women in their 20s'. Also the difference between the width of frontal appearance and depth proportion of side appearance was small, suggesting a more slender silhouette among the middle aged women. Finally, middle-aged women who were not wide or big in the chest had higher satisfaction with their bodies. As shoulder width and chest depth became small, the fit satisfaction of upper clothes increased. While longer lower body had higher fit satisfaction with pants crotch, shorter lower body had higher fit satisfaction with waist and abdominal parts.

• 패션비즈니스
• /
• 제9권3호
• /
• pp.47-63
• /
• 2005

The study with the subjects at 200 adult males in Busan in their 20s had a purpose at analyzing lateral body shapes to develop men's educational dress forms. The following are the conclusions: 1. Comparison at the Body Dimensions at Busan Male Adults in Their 20s and the 5th Survey at Korean Body Measurement In the comparison at the Busan and national body dimensions by way at Mollison's relative deviation, all compared items were under the deviation of 0.7. Therefore, the sample of Busan male grown-ups is understood io represent the body shapes of the average Korean male adults in their 20s. 2. Results of Lateral Body Shape Classification From factor analysis, seven factors were produced to explain 75.45% of all variables. Those 7 factors to compose lateral body shapes were hip prominence, back-neck sides, upper body's front-back depth, lateral upper body depth, hip-waist depth, front chest-waist depth, and hip and waist height. Cluster analysis revealed four characteristic lateral body shapes. Type 1 with the appearance rate of 11.70%, named D, had the greatest upper chest angle and tanterior neck lower angle. The front side was more developed. Type 2 with 33.51%, named I, was generally long and slender. Type 3 with 24.47%, named d, had the biggest depth differences in hip-chest as well as more prominent back hip. Type 4 with 30.32%, named q, had the biggest dorsal upper angle and the tiniest chest upper angle as the back area was a little bent.

• 한국의류산업학회지
• /
• 제22권4호
• /
• pp.495-503
• /
• 2020

This study classified lower body shape according to thigh and waist shape to improve the fit of skinny blue jeans in adult women in their 20s. We analyzed the three-dimensional automatic measurement data, three-dimensional indirect measurement data, and index data using the three-dimensional female (20-29 years old) body scan data provided by Size Korea (6^th Korean Human Dimensional Survey Project). Factor analysis was performed to classify body type. We selected and analyzed 34 items related to thigh shape based on index items, angle items, and protrusion amount items from 99 items; consequently, seven factors were extracted and 82.39% of the total variance was explained. Cluster analysis according to factor analysis classified it into 4 types, and a post-test Duncan test was conducted to classify thigh features according to classified types. As a result, the characteristics of lower body shape according to the thigh types of women in their 20s are as follows. Lower Body Type 1 is shape with a more prominent belly and less prominent thighs. Lower Body Type 2 is a slender body figure with larger hips. Lower Body Type 3 has more prominent thighs compared to the waist and belly. Lower Body Type 4 has both a prominent belly and prominent thighs.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.951-956
• /
• 2005

Since a snake achieves various movements just by a slender body, the mechanism of it is very amazing Many researches have been focusing on a snake like robot and have done for it on the ground. However the meander motion of the snake not only can be done by ground creatures, but also can be done by a water creature such as a sea snake or an eel. Therefore, the purpose of our research is to develop an autonomous underwater robot like the sea snake. As an approach to this goal, we develop an experimental sea snake-like-robot for examining basic characteristics, including propulsion, a turning and other performance. Our developed robot is composed of the head and 4 bodies. Each body equips one servomotor, which is operated with pulse signal. In the head unit, 1- chip-microcomputer, which generates the servomotor control signal for realizing a snake motion and the battery, is equipped. Our robot is covered with a rubber film for the waterproof. Using our developed robot, characteristics of the snake-like-robot moved in water are examined.

• 대한조선학회논문집
• /
• 제53권3호
• /
• pp.180-187
• /
• 2016

As distinct from a slender body, the separation of the boundary layer on a bluff body give rise to complex wakes in which various kinds of vortices form, develop and interact with each other. In this paper, we investigate cavitation wake field behind wedge shaped two-dimensional fin models. Eight different models are tested at the Chungnam National University Cavitation Tunnel (CNU-CT). First, we measure wake cavity shapes and compare with numerical results, which shows the good agreement with each other. In addition, we demonstrate that wake flow characteristics of the control fin are clearly identified by the correlation analysis of high-speed camera images and pressure fluctuation measurements.