• Journal of the Korean Geosynthetics Society
• /
• v.16 no.1
• /
• pp.73-83
• /
• 2017

Laboratory and in-situ tests were conducted to evaluate the cone factors for the layers with low plasticity containing a lot of silty and sand soils from the west coast (Incheon, Hwaseong and Gunsan areas) and its applicability was evaluated based on these results. The cone factors were evaluated from 19 to 23 based on unconfined compression strengths (qu), from 13 to 13.8 based on simple CU strengths and from 11.6 to 13.1 based on field vane strengths, respectively. The unconfined compression strengths of undisturbed silty soil samples with low plasticity were considerably underestimated due to the change of in-situ residual effective stress during sampling. Half of unconfined compression strength (qu/2) based cone factors of silty soils with low plasticity fluctuated and were approximately 1.8 times higher than simple CU based values of these soils. When evaluating cone factors of these soils, it should be judged overall on the physical properties such as the grain size distribution and soil plasticity and on the fluctuation of the corrected cone resistance and the sleeve friction due to the distribution of sandseam in the ground including pore pressure parameter.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.9
• /
• pp.1049-1059
• /
• 2011

This study investigates the current state of companies that manufacture and sell outdoor wear. A survey was conducted to identify what problems they had and what aspects they needed to supplement through a comparison and analysis of their block patterns. Companies that manufactured outdoor wear and those that sold them were separately surveyed to understand their current state. The manufactures included 4 companies and 14 sellers. The survey used interviews to cover the areas of target consumers, development patterns, production lines, body size, nominal size, production size, and functional materials for each item, and aspects that need improvement. The survey period was from September $3^{rd}$ to $10^{th}$ 2008. There were three block patterns for jackets, T-shirts, and pants. The investigator collected the patterns used by three outdoor clothing manu-facturers for comparison and assessment. As a result, the mean age of the target consumers set by the outdoor clothing manufacturers and sellers was 25.3-50.7 and 29.2-42.5, respectively, which shows that the outdoor clothing had a wider distribution of target consumers than the sellers. It is imperative for them to segment and differentiate the target consumers and concepts. The basic body measurements the companies used to draw the upper and lower garment patterns were the bust circumference for the upper garment patterns and the waist circumference for the lower garment patterns. The basic nominal size was 95 for the upper garment and 70 for the lower garment. Also analyzed were the block patterns according to the items to understand the pattern characteristics of each of the companies. There were a total of 35, 36, and 30 items for the jackets, T-shirts, and pants, respectively, to measure size. The items were then compared with one another in mean and standard deviation. The analysis indicate that the block patterns were not fit for women in their twenties or thirties to wear and required revisions in the length of the upper garment, the height of sleeve cap, bust circumference, hip length, and pant length.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.9
• /
• pp.1470-1478
• /
• 2010

This study investigates the suitability of outdoor wear among female trekkers in their twenties or thirties and provides data for developing outdoor wear more suitable for young females. Recently climbing has gained popularity as a leisure activity to enjoy the beauty of nature that increases physical and mental stamina. A survey was conducted on 304 female consumers in their twenties and thirties who enjoyed climbing in order to investigate the suitability of outdoor wear among young female consumers. The questionnaire covered the subjects' demographic information, duration and goal of climbing, purchase and suitability of outdoor wear, and preferred design for outdoor wear. As for the yearly situations, when they utilized outdoor wear, the biggest number of respondents chose "autumn" as the season for climbing. Most of the respondents were non-professional trekkers who enjoyed climbing as a hobby or for health. As for the size, the upper garment was 90 and 85 in the order, and the lower garment was 70 and 67 in the order. The pants were the most common item they owned, followed by round T-shirts, windbreaker jackets, zipup T-shirts, and waterproof jackets. They mentioned moisture absorption and dry fabric breathability as the basic functions required of outdoor wear. The subjects displayed a preference for partial details under the design category. They most preferred the hood-type jacket with a detachable stand collar, the sleeve hem with a partial rubber band and velcro strap, a T-shirt with a stand color and zipper, the waist fit with proper room, pants with a partial rubber band waist, and straight silhouette pants.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.2
• /
• pp.308-318
• /
• 2009

The purpose of this study was to develop the functionally improved winter work clothing for the Korean railroad workers. Based on the questionnaires, the sample clothing for the Korean railroad workers was produced. The design, materials, and patterns were modified to increase mobility and comfort of workers. Water-repellent treatment was added to the material in order to decrease the dirt and stains while working. Also the reflective strips were added to chest and back of the upper garment in order to increase visibility and safety of the workers. In terms of the design and pattern underarm of the sleeve and side panel of the bodice were put in together and action pleats at the back were inserted in order to decrease the pullback of the armpit and scapular area and increase mobility of the arm movement. Also the patterns of the elbows areas were modified to increase mobility of joint. The prototype was evaluated an objective assessment and subjective assessment to compare to the existing working uniform. Assessment group was consisted of 5 subject groups and 11 expert groups and evaluated external appearance and adaptability to the movements. According to the results, the prototype was evaluated better than the existing working uniform in appearance and adaptability except height of collar. A field test was conducted to compare the prototype and the existing working uniform. The field tests were performed by 6 workers in the Korean railroad. According to the results, the prototype was improved in terms of adaptability and comfort.

• Proceedings of the Korea Contents Association Conference
• /
• 2013.05a
• /
• pp.383-384
• /
• 2013

본 연구는 스포츠용 탄력 압박 스타킹(Essential compression calf sleeve, SKINS, Australia)을 착용하고 최대 운동을 하였을 때, 하지 부종에 어떠한 효과가 있는지를 알아보고자 한다. 실험 대상자는 젊은 성인 남녀 30명으로(남자 15명, 여자15명) 근 골격계 및 심혈관계에 특이 병력이나 사고에 의한 외상 등이 없었으며, 규칙적으로 운동을 하는 자는 제외하였다. 대상자들의 신체적 특성을 파악하기 위해서 자동 신장계(BSM330, Biospace, Korea)를 사용하였다. 부종정도를 알기위해서 줄자로 운동 전후의 장딴지 근(종아리)의 둘레와 체성분 분석기(InBody 720, Biospace, Korea)를 사용하여 하지의 부종 수치를 측정하였다. 최대의 운동은 호흡가스 분석기와 연결된 트레이드밀(CPEX-1, IRS, Japan)을 사용하여 변형된 BRUCE Protocol TR-3에 따라 호흡 교환율(R) 값이 1.15이상 되거나 all-out 될 때까지 하였다. 실험 대상자들은 동일 집단으로 전이효과를 방지하기 위하여 일주일의 간격을 두고 스포츠 탄력 압박 스타킹 착용 유무에 따른 동일한 실험을 두 번 하였다. 측정은 최대 운동 전후의 장딴지 근(종아리)의 둘레와 부종 수치를 하였다. 스포츠용 탄력 압박 스타킹 착용 유무와 운동 전후를 비교하기 위하여 MANOVA(다변량 분산분석)를 사용하였고 유의수준은 .05로 설정하였다. 탄력 압박 스타킹을 착용한 상태에서 최대 운동 전후의 부종 정도를 측정한 결과 스타킹을 착용하지 않았을 때 운동 전후의 둘레가 유의하게 증가하였고(p<0.05), 스타킹을 착용 하였을 때 운동 전후의 둘레가 유의하게 증가하지 않았다(p>0.05). 부종 수치(세포외액/전체체액)는 탄력 압박 스타킹을 착용하였을 때 오른쪽 다리는 유의하지 않게 감소하였고(p>0.05), 왼쪽 다리는 유의하게 감소하였다(p>0.05). 탄력 압박 스타킹을 착용하고 운동할 경우 하지의 부종 경감에 어느 정도 효과가 있다고 사료된다.

• Journal of Chest Surgery
• /
• v.25 no.12
• /
• pp.1508-1515
• /
• 1992

Between 1975 and 1992, forty five patients with trachea stenosis received tracheoplasty for relief of obstruction. The causes of airway problem are brain contusion[19 cases, 40%], cerebrovascular disease[3 cases, 7%], drug intoxication[8 cases, 18%], psychotic problem[2 cases, 4%], trachea tumor[3 cases, 7%], adult respiratory distress syndrome[9 cases, 20%] and direct trauma[1 case, 2%]. Direct causes of trachea stenosis were complications of tracheostomy[36 cases, 80%], complications of nasotracheal intubation[5 cases, 11%], tumor[3 cases, 6%] and trauma[1 case, 2%]. Thirty one patients underwent the sleeve resection and end-to-end anastomosis. Five patients performed a wedge resection and end-to-end anastomosis. Forteen patients received the Montgomery T-tube for relief of airway obstruction. Four patients have done simple excision of granulation tissue. Two, subglottic stenosis patients were received Rethi procedure[anterior division of cricoid cartilage, wedge partial resection of lower thyroid cartilage and Montgomery T-tube molding] and the other subglottic stenosis patient underwent permanent trachea fenestration. Including cervical flexion in all patients postoperatively, additional surgical techniques for obtain tension-free anastomosis were hyoid bone release technique in two cases, and hilar mobilization, division of inferior pulmonary ligament and mobilization of pulmonary vessel at the pericardium were performed in one case. Cervical approach was used in 39 cases, cervicomediastinal in 12 cases and transthoracic in one case. Complications of tracheoplasty were formation of granulation tissue at the anastomosis site[3 cases], restenosis[9 cases], trachea-innominate artery fistula[2 cases], wound infection[2 cases], separation of anastomosis[2 cases], air leakage[3 cases], injury to a recurrent laryngeal nerve[temporary 8 cases, permanent 2 cases] and hypoxemia[1 case]. Surgical mortality for resection with primary reconstruction was 6.7%, with one death due to postoperative respiratory failure and two deaths due to tracheo-innominate artery fistula.

• Journal of Fashion Business
• /
• v.7 no.4
• /
• pp.78-92
• /
• 2003

The upper-body characteristics of the right-handed and the left-handed are examined and compared through 1-dimensional measurement and 2-dimensional measurement. The results were as follows: 1. According to 1-dimensional measurement results, the clearest differences were seen in girth items rather than height or length items. In particular, hand girth, lower arm girth, and upper arm girth were bigger on the left side in the left-handed group and the right side in the right-handed group. This is thought to be relevant to the arm muscles frequently used. 2. According to 2-dimensional measurement results, significant differences appeared in the females of the left-handed group: shoulder point among width items. In the right-handed group, some differences of significance were shown in females (shoulder point, rear armpit point, and B.P. point among width items) and males (front neck point among extreme vertical distance items). In summary, the body type characteristics of the left-handed and the right-handed reveal great differences in the items related to arm length and arm girth. In other words, the sleeve and shoulder patterns production based on the right-handed don't rightly reflect the somatotype characteristics of the left-handed. In addition, in the cases of athletes, laborers, and the disabled who frequently use particular muscles or parts of the body, this sort of research in the patterns is consistently needed in order to reflect the size differences in girth items in upper body.

• Journal of Fashion Business
• /
• v.12 no.2
• /
• pp.134-152
• /
• 2008

Functional, aesthetic and symbolic working uniforms in the industrial complex are demanded by employees and employers. The purpose of this research was to find out the actual wearing condition and preference of the working uniform design in the industrial complex. The research selected 7 enterprise subjects located in the Changwon National Industrial Complex and adopted a questionnaire method. 912 workers categorized into 4 work groups according to their work posts replied in total. The data and the degrees of satisfaction/preference of the working uniforms were analysed into descriptive statistics and F-tests by using the SPSS S/W package. The results were as follows: First, the style of the working uniform was the standard two-piece style. Second, the degree of the satisfaction with the entrepreneurial image implied to the working uniform was 2.83 throughout the 5-scale evaluation. In addition, the degree of the satisfaction with the working uniform colors was in between 2.94 and 2.96. Third, unsatisfied parts of the upper and lower uniform garments were: sleeve > pocket > collar; and waist belt loop > hip pocket > hem line respectively. Fourth, beige was the most preferred color for the working uniform top and bottom both. The most preferred color images were the calm and safety and the bright and light in order. Especially, the demand on the safety factors and soil proof colors of the outside field workers was much higher than the clerical workers. Fifth, the blouson type jacket with shirts collar or soutien roll collar was more preferred to than the casual style; and the straight formal pants were more preferred to than the casual/sweat sports pants styles. Sixth, inner pockets to keep the mobile phone and pens were required for upper garment details specially by manufacture workers. Increase of the waist belt loop numbers was required by all work groups.

• Fashion & Textile Research Journal
• /
• v.4 no.1
• /
• pp.19-30
• /
• 2002

The word 'lace' comes from the Latin, lacium, meaning a knot. There are two broad categories of lace: needlepoint lace and bobbin lace. Lace has enjoyed a multitude of uses, embellishing both liturgical and domestic objects. It has also played a major role in the history of western fashion, adorning the apparel of men as well as women. Lace lappets and cap crowns, cravat ends and veils were made for those who could afford them. Before the end of the sixteen century, more complex techniques were employed. The baroque period, needlepoint lace evolved from the early simple geometric patterns of punto in aria Which enhanced ruffs, to deeply scalloped designs, often referred to as collar lace, and thence to the bold and magnificent relief effects of Venetian gros point. Through the seventeenth century is noted for the infinite variety of its cravat, collar and kerchief, most of them lace trimmed and all artfully contrived for the wearer. The type of sleeve in women's dress reaching just below the elbow, ending in ruffles of lace which was called engageantes. Sometimes the ends of a fichu or headdress decorated of lace. In the nineteenth century, empress Eugenie's love of lace resulted in a marked increase in the use of that lovely, delicate fabrication. It was lavished upon sleeves, hats, capes, and handkerchieves. Entire flounces, parasols, jackets, and shawls of lace were created by skilled lace makers of Europe. By the time this magnificent piece was created, most lace was being produced by machine. Today, the tradition of handmade lace continues, but glorious examples are no longer made. However, the techniques have been taken up and revitalized within the fiber art movement.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.10
• /
• pp.1175-1187
• /
• 2011

This study investigates the wearing conditions and satisfaction level of middle school boys' uniforms. The subjects for the survey were 626 male students from 9 middle schools in Seoul. Data were analyzed using the SPSS 14.0 program. The results of this study are as follows; 1) When purchasing school uniforms, students considered the comfort and the fit important. Student considered importantly the shoulder width of jacket, the shirt length and the sleeve length of shirt, and the pant length and the pant width of pants. 2) Most of students purchased one size bigger school uniforms because they need to wear school uniforms for three years. About 80% of students had difficulties in understanding the meaning of size label, and this made it difficult to select the right size of school uniforms even if they knew their body size exactly. 3) About 10% of students repurchased school uniforms because their school uniforms did not fit any more. The periods of repurchase were the 1st grade 2nd semester and the 2nd grade 1st semester. 4) The waist circumference of pants and the pant width were evaluated larger and the pant length was evaluated to be longer (36.6% of students evaluated that the pant length was longer). Compared to 2nd grade and 3rd grade, the freshman felt that school uniforms were bigger. 5) 44.9% of students had the experience of repairing their school uniforms. The most frequent reason for repair was that the size of school uniforms did not fit well. 202 students repaired the pant length and 86.1% of them reduced their pant length.