• Journal of Chest Surgery
• /
• v.29 no.3
• /
• pp.315-321
• /
• 1996

Bronchoplastlc procedures including sleeve lobectomy were initially introduced for patients whose pulmonary function was insufficient to tolerate pneumonectomy In more recent years, sleeve lobectomy has evolved as an alternative to pneumonectomy in carefully selected cases of bronchogenic carcinoma, especially for centrally located lesions. Between 1992 and 1995, bronchoplastic procedures for bronchogenic carcinoma were performed in 15 patients and the majority of operative procedures were sleeve lobectomy (W: 12). All procedures were considered as complete and potentially curative. Mean age was 62.3 years (range 46 to 70 years) and there were 12 males and 3 females. Of 15 patiients, 7 underwent right upper sleeve, 2 underwent right lower sleeve, 5 underwent left upper sleeve, and 1 underwent right sleeve pneumonectomy. Postoperative staging was , stage I in 3, stage ll in 8, stage llla in 3 and stage lII in 1. The postoperative complications included anastomosis site obstruction due to granulation tissue in 1, local recurrence in 3, and wound infection in 1 There were 1 operative death due to sepsis and 2 late deaths. The three-year survival rate was 80%. The significant correlation was observed (r=0.11) between the predicted FEVI (1.851 L) and measured FEVI (1 762L). In conclusion, bronchoplastic procedure will have better prognosis than pneumonectomy in selected lung cancer patients because of preserving good function in remnant lung.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.9 s.100
• /
• pp.926-931
• /
• 2005

In this paper, the printed-sleeve monopole antenna which has the small size and the broadband characteristics, is presented and its radiation characteristics are investigated. To conform the broadband characteristics of the proposed antenna, the experimental antenna is designed, fabricated, and its radiation characteristics are measured in PCS band (1.75 GHz${\~}$1.87 GHz). It is shown that the designed antenna has the non-directional pattern in the horizontal plane, the directional pattern in the vertical plane, VSWR less than 1.5, and gain in 2.14 dBi${\~}$3.4 dBi. From these results, the proposed antenna is conformed as a broadband antenna which can be used for the mobile communication indoor antenna extensively.

• Journal of Welding and Joining
• /
• v.14 no.5
• /
• pp.95-105
• /
• 1996

Korea Gas Corporation has operated high pressure gas transmission line of about 600 kilometers and, therefore, a series of repair welding processes are required in order to cope with external defects such as dent, gouge, cracking usually due to mechanical attacks. Most of gas pipelines repair processes are performed after completely venting remaining gas. However, in some case, though it is very unusual, repairs require without venting gas. For instance, this case is that damaged pipeline is remedied with split sleeve by welding. In this paper, in an effort to confirm a safe application of the split sleeve welding, residual stress, strain and temperature distributions are evaluated by computer simulation and experiments. The results obtained are as follows : 1) Computer modelling is supposed to be reasonable because microstructure changes due to welding is simulated coincidently as compare to that of real condition. 2) The maximal temperature on inside surface of pipeline is 50$0^{\circ}C$ for the repair welding process. 3) The amount of residual stress is estimated as the stress corresponding to 0.8% strain. 4) The repair process employed is determined to be technically preferable because of its avoiding cracks and fractures in the course of welding.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.2
• /
• pp.94-100
• /
• 2009

In diesel engines, it is inevitable that the torsional vibration is produced by the fluctuation of engine torque. Therefore, it is necessary to establish preventive measures to diminish the torsional vibration. The sleeve spring type damper is one of the preventive measures for reducing the torsional vibration. In this study, a closed form equation to predict spring constant of the sleeve spring and torsional characteristic of the torsional vibration damper was proposed to calculate stiffness of the damper and verified their availability through the finite element analysis. The theoretical values have a good agreement with the results obtained by the finite element analysis. The results obtained from the equation derived enable the designers in actual fields to be more efficient.

• Journal of the Korean Society of Safety
• /
• v.21 no.3 s.75
• /
• pp.1-7
• /
• 2006

Nowadays, out of other transmission parts, the sleeve is getting more and more important part for exact and smooth shifting from gear ratio change whenever drivers are needed. To exact and smooth shifting when drivers are needed, all the parts connected with gear shifting should be machined exactly and having dimensions designers are intended. Especially, in case of the sleeve that the most important functional part to shift from gear ratio change that drivers are intended, it needs high precision grade and quality in both sides runout and outer dia runout as well as inner spline small dia & large dia. Because it's assembled with the synchro hub spline and shifted directly with the mating cone. So, it should be applied the hear treatment(hereinafter referred to H.T.M.T) to prevent the friction and percussion loss from shifting with mating cone. At this time, the deformation problems are raised from almost H.T.M.T. process and it makes the inferior part.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.11a
• /
• pp.805-808
• /
• 2008

Due to the fact that bare FBG sensors are very fragile, bare FBG sensor is not properly applied in practical infrastructures as it is not suitable to the rudeness of construction. Therefore packaged FBG sensors are developed for construction application. Since FBG senses strain and temperature simultaneously, temperature compensation for FBG strain sensors is indispensable. In this paper, temperature compensation techniques for steel sleeve packaged FBG sensors are brought forward. And its application on monitoring concrete beam was carried to test the feasibility of the temperature compensation technique. Temperature compensation technique used in this paper is feasible to be extended to structure health monitoring in civil engineering especially in large infrastructures etc.

• Journal of the Korean Society of Costume
• /
• v.53 no.4
• /
• pp.17-29
• /
• 2003

Long Sleeve Costume is often seen not only in ancient China but also in various neighboring places throughout the time. Costumes show the societies cultural preferences and values at that time, and Long Sleeve Costume is no exception. In my research, 1 focused on the time period from Han Dynasty to Tang dynasty in ancient China. During Han dynasty, Shenyl style robe(심의형 포) was widely worn, and it shows very little foreign cultural influence. For the period of Wei·Jin Southern and Northern Dynasties, foreign aspects of costume started to show up Possibly due to the influence of Buddhism and influx of foreign tribes. For instance, it is not too difficult to find hufu (호복) as well as Shenyl style robe, and it appears this Wei Jin Southern and Northern Dynasties may have been a transitional period of accommodating two cultures without complete merger. Now, when it comes to Tang dynasty, we observe a creation of new cultural form in costume after adopting exotic culture. Because Sh ny style robe. often observed for a long time in Chinese history, disappeared, and tuanling(단영) and fanling(번영) became the main stream in their costume style in Tang dynasty.

• Journal of Mechanical Science and Technology
• /
• v.17 no.9
• /
• pp.1324-1331
• /
• 2003

A bushing is a device used in automotive suspension systems to cushion the force transmitted from the wheel to the frame of the vehicle. A bushing is essentially a hollow cylinder which is bonded to a solid metal shaft at its inner surface and a metal sleeve at its outer surface. The shaft is connected to the suspension and the sleeve is connected to the frame. The cylinder provides the cushion when it deforms due to relative motion between the shaft and sleeve. The relation between the force applied to the shaft or sleeve and its deformation is nonlinear and exhibits features of viscoelasticity. An explicit force-displacement relation has been introduced for multi-body dynamics simulations. The relation is expressed in terms of a force relaxation function and a method of determination by experiments on bushings has been developed. Solutions allow for comparison between the force-displacement behavior by experiments and that predicted by the proposed method. It is shown that the predictions by the proposed force-displacement relation are in very good agreement with the experimental results.

• 한국공간정보시스템학회:학술대회논문집
• /
• 2004.05a
• /
• pp.53-62
• /
• 2004

A single layer latticed dome is one of the most efficient structures because of its low specivic gravity. For easily analyzing of a single layer latticed dome, joint system is assumed to be pin or rigid joint. However, its joint uses ball whose system has intermediate properties of pin and rigid joint. Therefore this study has a grasp of bending rigidity, stress and mechanical properties through experimental and analyzing method of the bolt inserted ball joint. To analyze the stress of bolt and sleeve, this study uses through 3D elastic contact and cubic element, and then the ball and the bolt are perfectly connected for easily analyzing Compared experimental results to F.E.M, each specimen has an error of less than 12 percent. In the results of stress distribution through F.E.M, stress occurs from bottom of bolt to top of sleeve, and most of tension appears on the bolt, also compression occurs from upper parts of the bolt to the sleeve. The assumption of bending stiffness in ball joint is well known that bolt resists only tension and upper sleeve resiss compression. The results of experiment and analysis have $7{\sim}56%$ error, assuring that upper part of bolt occurs of partial compression. In the result of modified assumption have $4{\sim}20%$ error.

• Journal of the Korean Society of Costume
• /
• v.33
• /
• pp.73-88
• /
• 1997

In old Korea from the 4th century of 6th cen-tury the lapels of You and upper garment folded slightly. It had tight sleeves and its length was not long reaching to the hips. but from the 7th century the sleeve of You became wider and its length became longer, Chinese You folded very deeply across the breast and its sleeve was tight. The length of Chinese You was short too strectching out to the hips. From the 5th century the sleeve of the Chinese You became wider Chinese trousers with wide crotch appeared in the 4th century during the time when Ezst Jin Dyn-asty ruled China. The upper garments with the wide sleeve was common by the 7th century in China. What is specially noteworthy is that Short-dalnyung appeared in the 5th ∼6th century. In old Korea strings were used to tie the bottoms of the trousers. Trousers with tight crotch did not need the strins. korean trousers with wide lines were narrower than the Chinese trousers at the bottom and it was not necessary to use the strings for people to put them on In China there were both of wide trousers and tight trousers. People tied trousers around the kness with the strings in the formal places but they did not tied the trousers with the strings when they wore the ordinary clothes. Chinese trousers were very wide just like a skirt and they were much wider than wide Korean trousers.