• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.4
• /
• pp.1076-1089
• /
• 2012

Home automation networks are good environments for merging sensor networks and consumer electronics technologies. It is very important to reduce the energy consumption of each sensor node because sensor nodes operate with limited power based on a battery that cannot be easily replaced. One of the primary mechanisms for achieving low energy operation in energy-constrained wireless sensor networks is the duty-cycle operation, but this operation has several problems. For example, unnecessary energy consumption occurs during synchronization between transmission schedules and sleep schedules. In addition, a low duty-cycle usually causes more performance degradation, if the network becomes congested. Therefore, an appropriate control scheme is required to solve these problems. In this paper, we propose UDC (Unsynchronized Duty-cycle Control), which prevents energy waste caused by unnecessary preamble transmission and avoids congestion using duty-cycle adjustment. In addition, the scheme adjusts the starting point of the duty-cycle in order to reduce sleep delay. Our simulation results show that UDC improves the reliability and energy efficiency while reducing the end-to-end delay of the unsynchronized duty-cycled MAC (Media Access Control) protocol in sensor-based home automation networks.

• Journal of Information Processing Systems
• /
• v.6 no.4
• /
• pp.553-562
• /
• 2010

The core services in cloud computing environment are SaaS (Software as a Service), Paas (Platform as a Service) and IaaS (Infrastructure as a Service). Among these three core services server virtualization belongs to IaaS and is a service technology to reduce the server maintenance expenses. Normally, the primary purpose of sever virtualization is building and maintaining a new well functioning server rather than using several existing servers, and in improving the various system performances. Often times this presents an issue in that there might be a need to increase expenses in order to build a new server. This study intends to use grid service architecture for a form of server virtualization which utilizes the existing servers rather than introducing a new server. More specifically, the proposed system is to enhance system performance and to reduce the corresponding expenses, by adopting a scheduling algorithm among the distributed servers and the constituents for grid computing thereby supporting the server virtualization service. Furthermore, the proposed server virtualization system will minimize power management by adopting the sleep severs, the subsidized servers and the grid infrastructure. The power maintenance expenses for the sleep servers will be lowered by utilizing the ACPI (Advanced Configuration & Power Interface) standards with the purpose of overcoming the limits of server performance.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.731-736
• /
• 2008

There was in a building and with the technical advance for a energy saving the secret efficiency of the building improved together and continuously was come. The indoor air environment brought about the deterioration which is remarkable because of it. But time of most the indoor air environmental matter is one in the element which healthily affects biggest in the moderns who lives from the interior space. Today the plan for the air environmental maintenance which dwelling space is appropriate is demanded, is the actual condition where the method of the ventilation control which is energy saving and efficient is necessary. From the research which it sees, number of ventilation 0.7 time of the aeration which is a domestic legal baseline is excessive is judged from the research which sees, The sleep hour assumes it stays most long the hour when, number of ventilation 0 time 0.1 times 0.4 times $CO_2$ consistency measurements and analyzes number of ventilation conclusive escape. And $CO_2$ peak point control leads it decides a data, effective and it talks an energy saving circulation control method and it does to sleep.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.411-414
• /
• 2011

This paper describes a tripple-mode DC-DC buck converter with DPSS Fucntion. The DC-DC buck converter operate in PWM(Pulse Width Modulation) mode at moderate to heavy loads(80mA~500mA), in PFM(Pulse Frequency Modulation)at light loads(1mA~80mA), and in LDO(Low Drop Out) mode at the sleep mode(<1mA). In PFM mode DPSS(Dynamic Partial Shutdown Strategy) is also employed to increase the efficiency at light loads. The triple-mode converter can thus achieve high efficiencies over wide load current range. The proposed DC-DC converter is designed in a CMOS 0.18um technology. It has a maximum power efficiency of 97.02% and maximum output current of 500mA. The input and output voltages are 3.3V and 2.5V, respectively. The chip size is $1465um{\times}895um$ including pads.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.890-893
• /
• 2010

In wireless sensor networks, each node generally uses a battery because it is hard to replace or charge. For this reason, study for life time prolongation of each node within the limited energy source has become an important issue. So many ways are suggested to minimize the energy consumption for each node, especially energy efficient MAC protocols have been studied actively. T-MAC of contention based MAC protocol is that added the adaptability on fixed duty cycle of S-MAC. T-MAC allocates the fixed timeout before each node goes to sleep mode from active mode. If no data exchanged in a timeout, each node goes to sleep mode. Because of the timeout is always fixed, the absence of data exchange in a timeout will cause unnecessary energy consumption. In this paper, in order to improve the energy efficiency, we propose a MAC protocol based on adaptive timeout that analyze the probability of the timeout, and provides the modified timeout.

• International journal of advanced smart convergence
• /
• v.3 no.2
• /
• pp.1-5
• /
• 2014

Sensor nodes depend on batteries for energy source in Wireless Sensor Networks (WSNs). Low Energy Adaptive Clustering Hierarchy (LEACH) is a representative cluster-based routing protocol designed to ensure energy use efficiency whereas the virtual cluster exchange routing (VCR) information only with its closest node to build a network. In this paper, a protocol scheme was proposed wherein member nodes are designed to compare the currently sensed data with the previously sensed one and to switch to sleep mode when a match is achieved. The design is to help improve the transmission energy efficiency too.

• Sleep Medicine and Psychophysiology
• /
• v.10 no.1
• /
• pp.61-66
• /
• 2003

Objectives: The purpose of this study is to investigate the relationship between the extent of prolongation in P300 latency by sleep deprivation and personality variables. Methods: Eighteen healthy male college students participated in this study. Subjects remained awake for 37 hours under continuous surveillance. In the morning and evening of two consecutive study days, P300 was checked four times. MMPI and STAI-T were checked in the morning of the first day. The 18 subjects were divided into two groups according to their extent of P300 prolongation by sleep deprivation: Group A consisted of short P300 latency prolonged subjects, and group B of long latency prolonged subjects. The MMPI profiles and STAI-T scores of these two groups were compared. Results: Group B showed significantly higher scores in the Mf subscale (t=-2.16, df=16, p=0.046) and Pa subscale (t=-2.61, df=16, p=0.019) than group A. Group B also showed higher F subscale scores at a marginally significant level (t=-2.11, df=16, p=0.052). Conclusion: These results suggest that subjects with higher scores in F, Mf, and Pa subscales tend to have delayed cognitive process and decreased efficiency of mental process by sleep deprivation. It can be hypothesized that individuals who are sensitive, passive, dependent, and easily projecting are susceptible to the deterioration of cognitive function by total sleep deprivation.

• Sleep Medicine and Psychophysiology
• /
• v.1 no.1
• /
• pp.47-59
• /
• 1994

Objectives: The main purpose of this study was to investigate the possible differences in sleepiness, performance, and body temperature during the night between morning(M) and evening(E) type subjects. Methods: After a survey study, to verify the validity and reliability of the Korean translation of the Home' and $\ddot{O}stberg's$ Morningness-Eveningness Questionnaire(1976), 8 extreme M-type subjects(3males, 5 females) and 8 extreme E-type subjects(3 males, 5 females) were selected from the university student population who had participated in the survey study. All subjects underwent sleep latency test and a battery of performance tests at intervals of 2 hours through the night, from 23:00 to 07:00. Oral temperature of each subject was taken every hour from 21 : 00 to 8 : 00. Between the testing times, the experimenters ensured that subjects remained awake. Results: More profound sleepiness was found in the M-type compared to the E-type throughout the night, with significant differences in sleepiness occuring at 23:00 and 01:00 hours. Overall performance efficiency tended to be lower through, the night in the M-type than in the E-type on all tests. A difference in time of temperature minimum between the two types was not noteworthy. Rather, there appeared to be a substantial difference in temperature level during the declining phase, with the temperature of the M-type being lower than that of the E-type. Conclusions: These results indicate the existance of a temporal relationship between sleepiness, perfonnance and body temperature during night work. Since the M-type exhibited greater sleepiness and lower performance efficiency overnight than the E-type, it may be assumed that the E-type is more suitable for and tolerable to night work. There was some discussion of the limitations in generalizing these results together with some suggestions for future studies.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.13-21
• /
• 2009

The sensor nodes that form a wireless sensor network must perform both routing and sensing roles, since each sensor node always has a regular energy drain. The majority of sensors being used in wireless sensor networks are either unmanned or operated in environments that make them difficult for humans to approach. Furthermore, since many wireless sensor networks contain large numbers of sensors, thus requiring the sensor nodes to be small in size and cheap in price, the amount of power that can be supplied to the nodes and their data processing capacity are both limited. In this paper, we proposes the WSN(Wireless Sensor Network) algorithm which is applied sensor node that has low power consumption and efficiency measurement. Moreover, the efficiency routing protocol is proposed in this paper. The proposed algorithm reduces power consumption of sensor node data communication. It has not researched in LEACH(Low-Energy Adaptive Clustering Hierarchy) routing protocol. As controlling the active/sleep mode based on the measured data by sensor node, the energy consumption is able to be managed. In the event, the data is transferred to the local cluster head already set. The other side, this algorithm send the data as dependent on the information such as initial and present energy, and the number of rounds that are transformed into cluster header and then transferred. In this situation, the assignment of each node to cluster head evenly is very important. We selected cluster head efficiently and uniformly distributed the energy to each cluster node through the proposed algorithm. Consequently, this caused the extension of the WSN life time.

• Korean Institute of Interior Design Journal
• /
• v.20 no.4
• /
• pp.183-190
• /
• 2011

Lately majority of churches have preferred to enlarge their worship area to both horizontal and vertical axis. According to expand their area which brings more devotees to the limited service area. Transform from a small church into a large church is no longer unprecedented issue in South Korea. As the size of church getting bigger, many unexpected issues become matters. One of the significant problem is that the number of people have experienced either fall a sleep or feel a doziness during their service period. Due to the limited condition for the specific building type such as religion facility(church), IAQ improvements is seriously concerned. Therefore, we are going to examine by using simulation tool, CF, a difference of ventilation efficiency about the location and number of windows, and find the best way of the ventilation efficiency in a multi-stories type church by changing the exhaust pipes location and size. Furthermore, in this thesis, by changing a ceiling height from the existing building to confirm that $CO_2$ have been satisfied for both the ventilation efficiency and IAQ.