• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2910-2912
• /
• 2000

Since the heavy-duty power manipulator has high ratio gear reducers at its joints, its dynamic characteristics are much slower than that of the master manipulator and it is likely to encounter the saturation in the input magnitude when it is used as the slave manipulator in telemanipulator systems. This paper proposes a force reflecting position control scheme for 2 axes heavy-duty power manipulator which compensates control input saturation. A series of experiments is shown to give an excellent tracking performance regardless of saturation.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.833-836
• /
• 1998

The propose of this paper is to implement the master slave control with non-actuated Master Arm scheme by using spaceball. The spaceball is a device which can receive all 6-DOF at once and was selected because it isn't dependent to robot type or it's DOF but can be used to produce information about 3D coordiante system The proposed method's main benefit is that one who has no idea about robot structure can control the manipulator with easy. The simulation is supported with 3 modes of control to accomodate unexpected situation. The proposed implementation has probed that a non-trained user can manipulate the slave with intuition without much difficults.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.171-179
• /
• 2003

This paper presents a rehabilitation exercise system which utilizes a 6 DOF robot as a motion generator. This system was proposed for a stroke patient or a patient who has hemiplegia. A master-slave system was designed to exercise either paralysis or abnormal limb by using normal limb motion. The study on the human body was applied to calculate the motion range of elbows and shoulders. In addition, a force-torque sensor was applied to the slave robot to estimate the rehabilitation extent of the patient. Therefore, the stability of the rehabilitation robot could be improved. By using the rehabilitation robot. the patients could exercise by themselves without assistance. In conclusion, the proposed system was verified by computer simulations and system experiment.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.1
• /
• pp.33-38
• /
• 2007

In this paper, hardware implementation of interface and control between two robots, the master and the slave robot, are designed. The master robot is the motion capturing device that captures motions of the human operator who wears it. The slave robot is the corresponding humanoid robot arms. Captured motions from the master robot are transferred to the slave robot to follow after the master. All hardware designs such as PID controllers, communications between the master robot, encoder counters, and PWM generators are embedded on a single FPGA chip. Experimental studies are conducted to demonstrate the performance of the FPGA controller design.

• Proceedings of the KIPE Conference
• /
• 1998.07a
• /
• pp.116-122
• /
• 1998

This Paper presents some of challenges of creating feedback force, through manipulation of master manipulator, allowing the user to feel objects within a virtual environment. A sense of touch for the virtual environment. A sense of touch for the virtual environments was generated by a virtual compliance control method. In theis system data communication between the master and slave, we used TCP protocol. In the experiments. A position error between the master and slave arm was about $13.56^{\circ}$ in case that the master and slave arm had not compliance properties of the virtual object, while they have the its properties the position error reduced by $2.43^{\circ}$.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2525-2527
• /
• 2002

The objective of this paper is to design a force feedback controller for bilateral control of a master-slave manipulator system using adaptive fuzzy sliding mode control. In a bilateral control system, the motion of the master device is followed by slave the one. While the force applied to the slave is reflected on the master. In this paper a proposed controller applied to the system. Adding a switching control term to the input robustness is improved. Also the knowledge of the system dynamics is not needed. The computer simulation results show the performance of the proposed adaptive fuzzy sliding mode controller.

• The Journal of Korea Robotics Society
• /
• v.10 no.3
• /
• pp.139-145
• /
• 2015

This paper proposed a method of cooperative control of three mobile robots for carrying an object placed on a floor together. Each robot moves to the object independently from its location to a pre-designated location for grasping the object stably. After grasping the common object, the coordination among the robots has been achieved by a master-slave mode. That is, a trajectory planning has been done for the master robot and the distances form the master robot to the two slave robots have been kept constant during the carrying operation. The localization for mobile robots has been implemented using the encoder data and inverse kinematics since the whole system does not have the slippage as much as a single mobile robot. Before the carrying operation, the lifting operations are implemented using the manipulators attached on the top of the mobile robots cooperatively. The real cooperative lifting and carrying operations are implanted to show the feasibility of the master-slave mode control based on the kinematics using the mobile manipulators developed for this research.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1520-1524
• /
• 2004

This paper describes the development of a robotic maintenance system for use in a maintenance operation of the nozzle dam in a water chamber of a steam generator at the Kori nuclear power plant in Korea. The robotic maintenance system was designed to minimize the personnel exposure to a hazardous radioactive environment. This robotic maintenance system is operated by a teleoperated control which was designed to perform the nozzle dam maintenance tasks in a remote manner without endangering the human workers. Specific maintenance tasks involve the transportation, insertion, and removal of nozzle dams in a water chamber inside a steam generator via a narrow man-way entrance port. The developed robotic maintenance system has two major subsystems: a two degrees of freedom guiding device acting as the main guiding arm and a master-slave manipulator with a kinematic dissimilarity. The mechanical design considerations, control system, and capabilities of the robotic maintenance system are presented. Finally, a graphical representation of the nozzle dam maintenance processes in a simulated work environment are also demonstrated.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.4
• /
• pp.235-245
• /
• 2004

In this paper, fault tolerant mechanisms are presented for a servo manipulator system designed to operate in a hot cell. A hot cell is a sealed and shielded room to handle radioactive materials, and it is dangerous for people to work in the hot cell. So, remote operations are necessary to handle the radioactive materials in the hot cell. KAERI has developed a servo manipulator system to perform such remote operations. However, since electric components such as servo motors may fail by radiation, fault tolerant mechanisms have to be considered. For fault tolerance of the servo manipulator system, duplication mechanism increasing the reliability of the transport's driving motors and reconfiguration algorithm accommodating the slave's motor failure have been presented. The reconfiguration algorithm recovering the end effector's motion in spite of one motor's failure is based on control allocation redistributing redundant axes. The constrained optimization method and pseudo inverse method have been adopted for control allocation. Simulation examples and real test results have been presented to verify the Proposed methods.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.10
• /
• pp.949-958
• /
• 2012

Position tracking control of a link of a slave manipulator which needed to track the corresponding link of a master manipulator was addressed in this paper. Since driving torque from motor is transmitted through a set of flexible cable to link, the motion control system is modeled by a two-mass model connected with elastic coupling which has finite stiffness. Relative vibration of two-mass resonant system is a serious problem to operate manipulator. This paper proposed sliding mode control to reduce resonant vibration and fine position tracking control. Also, a pseudo-sliding mode control which uses a saturation function instead of a signum function was discussed and showed that the pseudo-sliding mode control can improve disturbance regulation performance as well as guarantees fine command tracking without chattering which is an inherent drawback of basic sliding mode control. In addition, a disturbance observer based sliding mode control has been suggested to improve disturbance regulation performance. The feasibility of the proposed control design was verified along with some simulation results.