• 한국자동차공학회논문집
• /
• 제10권4호
• /
• pp.1-6
• /
• 2002

Engine lubrication system is generally affected by vehicle driving conditions, which are composed of acceleration, braking deceleration and accelerating during cornering. The major reason is due to the oil pan system in which oil is directly influenced by inertia farce caused by vehicle driving conditions. Therefore, to confirm safety of engine lubrication system inertia farce effects are also considered in the developing state. For the purpose, we have carried the engine tilting tests using ourselves made test rig. Verifying the test results we also measured the inertia effects on the engine lubrication system using the circular tuning and slalom test with vehicle. Through the comparison study between two kinds of results we obtained that the engine tilting test rig was very useful to confirm the safety evaluation of engine lubrication system.

• 산업기술연구
• /
• 제21권B호
• /
• pp.273-280
• /
• 2001

In this study, a driver model based on the lead-lag controller for stable maneuver of a highly nonlinear, multi-dimensional, numerically stiff multibody vehicle model according to the various handling test requirements such as steady-state cornering, double lange change, etc. is presented The lead-lag controller is developed with lead and lag compensation. which use the transfer function with cross-over frequency by frequency response method. The proposed driver model is applied to a vehicle model in steady-state and slalom maneuver to verify its effectiveness and validity. The results show that the proposed path control strategy is excellent both in pursuing the desired course and stability of the vehicle.

• 한국항공우주학회지
• /
• 제31권8호
• /
• pp.50-57
• /
• 2003

헬리콥터를 공간상에서 비교적 가까운 거리에 불규칙하게 주어진 여러 경로점을 따라 비행하는 것은 아주 실제적인 임무인데 이러한 임무에서 최적의 경로를 찾는 것은 어려운 문제에 속한다. 역제어나 직접법을 사용하는 전통적 접근은, 역제어의 경우에는 전 구간의 경로를 시간의 함수로 미리 설정해야 한다거나, 직접법의 경우 계산시간이 너무 많이 소요 된다는 등의 제약으로 그 활용성이 제한적이었다. 본 논문에서는 최적제어기법을 적용하여 다중경로점이 주어진 문제에 대해 최적경로를 구하는 알고리듬을 개발하고 이를 이용하여 slalom 운동과 전체적으로 곡선이 경로에서 일부구간만 선형으로 주어지는 문제 등에 있어서의 헬리콥터의 최적경로를 구하고 그 효용성을 검증하였다.

• 한국자동차공학회논문집
• /
• 제23권6호
• /
• pp.615-622
• /
• 2015

Recently Digital-TachoGraph(DTG) was mounted mandatorily in commercial vehicles(Taxi, Bus, etc.). DTG records accurate and detailed information of the running state of vehicles related to traffic accident, such as Time, Distance, Velocity, RPM, Brake ON/OFF, GPS, Azimuth, Acceleration. Thus those standardized data can play an important role in traffic accident investigation and reconstruction. To develope the accurate and objective method using the DTG data for the reconstruction of traffic accident, we had conducted several tests such as driving test, high speed circuit test, braking test, slalom test at Korea Automobile Testing & Research Institute(KATRI), and collision test at Korea Automobile insurance repair Research and Training center(KART) with the vehicle equipped with several DTG. Development of the program which enables the reading and analysis of the DTG data was followed. In the experiments, we have found velocity error, RPM error, brake signal error and azimuth error in several products, and also non-continuous event data. The cause of these errors was deduced to be related to the correction factor, the durability of electronic parts and the algorithm.

• 한국자동차공학회논문집
• /
• 제3권3호
• /
• pp.119-128
• /
• 1995

A driver-vehicle model means the integrated dynamic model that is able to estimate the steering wheel angle from the driver's desired path based on the dynamic characteristics of the driver and vehicle. In this paper, the dynamic characteristics of several four-wheel steering systems with the simultaneously steerable front and rear wheels are investigated and compared by means of the driver-vehicle model. Especially, the presented analysis results are obtained by using the ISO test codes such as lane change, double lane change and slalom, and the effects of the driver's steering response time and vehicle speed are examined on the responsiveness and stability of vehicle.

• 한국자동차공학회논문집
• /
• 제13권2호
• /
• pp.37-43
• /
• 2005

A haptic steering system which reflects steering reaction torque has been developed for a fixed base vehicle simulator. The haptic steering system consists of a steering effort sensor, MR-clutch, AC servo motor and controller. In order to generate realistic steering torque feel to driver and at the same time to meet real-time simulation requirement, 3D torque map is constructed by experimental data and torque generation algorithm using the torque map has been also developed. 3D torque map is constructed using curve fitting and interpolation of the measured values of the steering angle, velocity and steering torque from actual slalom test on the proving ground. In order to carry out performance test of the developed haptic steering system, a fixed based vehicle simulator is constructed by integrating real time vehicle dynamics module, VR-video/audio module, and the haptic steering system. Steering torque and steering angle curves have been obtained from virtual testing in the vehicle simulator and performance of the haptic steering system has been evaluated.

• 한국인터넷방송통신학회논문지
• /
• 제14권5호
• /
• pp.179-187
• /
• 2014

사고기록장치는 사고 전 후의 차량의 상태 및 운동 정보를 기록하는 장치로 객관적인 사고분석과 실사고 데이터를 이용한 자동차 안전장비의 개발을 위해 교통사고 조사기관과 부품개발사에서 많은 관심을 보이고 있다. 본 연구는 사고기록장치의 출력데이터를 이용한 교통사고재현을 통해 객관적, 과학적 사고분석에 목적을 두고, 더블레인 체인지 테스트 6회 슬라롬 테스트 1회의 실차 주행시험 및 시뮬레이션을 진행하였다. 실차시험을 통하여 취득한 차량의 속도, 종 횡방향 가속도, 조향각, 주행경로 등의 정보를 이용하여 교통사고 재현 및 분석 프로그램인 PC-Crash로 시뮬레이션을 진행하였다. 시뮬레이션은 가속도-조향각 입력방법과 가속도-주행경로 입력방법으로 2회 진행하였으며, 실차시험 결과와 2가지 시뮬레이션의 결과를 비교하여 최적의 경로 재현성을 갖는 분석방법을 도출하였다.