• Structural Engineering and Mechanics
• /
• v.16 no.3
• /
• pp.317-326
• /
• 2003

The tension leg platform (TLP) is a moored floating offshore structure whose buoyancy is more than its weight. The mooring system, known as tethers, is vulnerable to failure due to extreme (maximum and minimum) tensions. In the present study the reliability of these tethers under maximum and minimum tension (ultimate limit state) has been studied. Von-Mises failure criteria has been adopted to define the failure of a tether against maximum tension. The minimum tension failure criteria has been assumed to meet when the tethers slack due to loss of tension. First Order Reliability method (FORM) has been adopted for reliability assessment. The reliability, in terms of reliability index, and probability of failure has been obtained for twelve sea states. The probabilities of failure so obtained for different sea states have been adopted for the calculation of annual and life time probabilities of failure.

• Wind and Structures
• /
• v.6 no.2
• /
• pp.151-164
• /
• 2003

On the basis of the first Lyapunov stability theory, this paper develops a dynamic stability criterion for elastic structural systems under arbitrary dynamic loads, and shows the stability criterion using energy variation. After the dynamic stability criterion is validated through a classic example, it is used for the dynamic stability investigation of practical guyed masts under random wind loads. The criterion is reliable, simple and of advantage for structures with large number of elements and nodes. The slack guys and internal resonance between guys and mast are two main factors which induces the dynamic instability of guyed masts, at the same time, some dynamic stability characteristics of guyed masts are found.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.561-564
• /
• 2004

The motion estimation which requires huge computation consumes large power in a video encoder. Although a number of fast-search algorithms are proposed to reduce the power consumption, the smaller the computation, the worse the performance they have. In this paper, we propose an architecture that a low energy management scheme can be applied with several fast-search algorithm. In addition. we show that ECVH, a software scheduling scheme which dynamically changes the search algorithm, the operating frequency, and the supply voltage using the remaining slack time within given power-budget, can be applied to the architecture, and show that the power consumption can be reduced.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.6
• /
• pp.799-803
• /
• 2007

In this paper, we propose a new fuzzy membership function for FSVM(Fuzzy Support Vector Machines). We apply a fuzzy membership to each input point of SVM and reformulate SVM into fuzzy SVM (FSVM) such that different input points can make different contributions to the learning of decision surface. The proposed method enhances the SVM in reducing the effect of outliers and noises in data points. This paper compares classification and estimated performance of SVM, FSVM(1), and FSVM(2) model that are getting into the spotlight in time series prediction.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.6
• /
• pp.1122-1129
• /
• 2007

For a system with multiple real-time tasks of different deadlines, it is very difficult to find the optimal checkpoint interval because of the complexity in considering the scheduling of tasks. In this paper, we determine the optimal checkpoint interval for multiple real-time tasks that are scheduled by RM(Rate Monotonic) algorithm. Faults are assumed to occur with Poisson distribution. Checkpoints are inserted in the execution of task with equal distance in the same task, but different distances in other tasks. When faults occur, rollback to the latest checkpoint and re-execute task after the checkpoint. We derive the equation of maximum slack time for each task, and determine the number of re-executable checkpoint intervals for fault recovery. The equation to check the schedulibility of tasks is also derived. Based on these equations, we find the probability of all tasks executed within their deadlines successfully. Checkpoint intervals which make the probability maximum is the optimal.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.3
• /
• pp.421-428
• /
• 2008

The DVS(Dynamic Voltage Scaling) technique is the method to reduce the dynamic energy consumption. As using slack times, it extends the execution time of the big load operations by changing the frequency and the voltage of variable voltage processors. Researches, that controlling the energy consumption of the processors and the data transmission among processors by controlling the bandwidth to reduce the energy consumption of the entire system, have been going on. Since operations in multiprocessor systems have the data dependency between processors, however, the DVS techniques devised for single processors are not suitable to improve the energy efficiency of multiprocessor systems. We propose the new scheduling algorithm based on DVS for increasing energy efficiency of multiprocessor systems. The proposed DVS algorithm can improve the energy efficiency of the entire system because it controls frequency and voltages having the data dependency among processors.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.11 no.3
• /
• pp.204-210
• /
• 2011

This paper proposes a fuzzy support vector machine ($FSVM_n$) pattern classifier to classify the arrhythmia patterns of an electrocardiograph (ECG). The $FSVM_n$ is a pattern classifier which combines n-dimensional fuzzy membership functions with a slack variable of SVM. To evaluate the performance of the proposed classifier, the MIT/BIH ECG database, which is a standard database for evaluating arrhythmia detection, was used. The pattern classification experiment showed that, when classifying ECG into four patterns - NSR, VT, VF, and NSR, VT, and VF classification rate resulted in 99.42%, 99.00%, and 99.79%, respectively. As a result, the $FSVM_n$ shows better pattern classification performance than the existing SVM and FSVM algorithms.

• Textile Coloration and Finishing
• /
• v.6 no.2
• /
• pp.1-9
• /
• 1994

In order to study the effect of mordanting on silk fabrics treated with tannin, those fabrics were treated with Al, Cu, Cr, Fe, Sn by pre and post mordanting. It was studied about color change, weighting effect, dgree of photodegradation by pre and post mordanting. The results are as fallows ; 1. On the addition of mordants into mimosa and tannic acid solution, &{\lambda}_{max}& of the former was slightly blue-shifted, on the other hand, &{\lambda}_{max}& of the latter was obviously Red-shifted. 2. In case of Cu, Cr, Pre mordanting, weighting effect were appeared. Weighting effect of silk fabrics treated with Tannic acid increased higher than mimosa by mordanting. 3. In color change, Silk fabrics treated with Mimosa and Tannic acid generally changed to red direction and fabrics treated with tannic acid changed to yellow direction by pre and post mordanting. 4. In the photodegradation, the degree of photodegradation on mordanted fabrics increased. Its degree was slack in Cu, Cr, Post mordanting. On the other hand, Al, Fe, Sn were greate. Silk fabrics treated with Mimosa and Tannic acid got inhibiting effect on photodegradation.

• Proceedings of the Korean Professional Engineer Association Conference
• /
• 1984.12a
• /
• pp.84-91
• /
• 1984

Heavy Residual Fuel oils is a mixture of reduced crude from crude unit, bottom products from vacuum and/or catalytic cracking unit with distillate to meet the specification and generally used as Heavy Fuel Oil for large combustion engines, boilers, etc…. But this study was made to investigate Heavy Residual Fuel oils for using as industrial raw material and resulted the following possibilties as valuable raw material as well as Heavy Fuel Oil. 1) Production of straight asphalt through vacuum distillation unit. 2) Using straight asphalt from vacuum distillation unit for manufacturing of Blown Asphalts, Cut Back Asphalts, Emulsified Asphalts and Asphalt Compound, etc…. 3) Using waxy oil side streams for manufacturing of raw oil to be Lube Oil base stocks through solvent dewaxing. 4) Production of lube base oils from dewaxed raw oil through chemical treatments. 5) Manufacturing of paraffine wax from slack wax to be produced as by product of dewaxing process.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10c
• /
• pp.139-144
• /
• 1998

This study is intended to devolop the self waterproof agents for high performance concrete by analyzing the properties of fresh and hardened mortar with various addition ratios of the inorganic admixture and zinc stearate. As the results of the test, the flow and air content increase with the addition of expansive additives. When the replacement rate of silica fume increases, the flow decreases for the increased viscidity. And the flow and sir content decrease with the addition of zinc stearate. At hardened state, the compressive strength, tensile strength and flexual strength decrease with the addition of expansive additives and zinc stearate. With the increase of silica fume's replacement, they show a little decrease at early age and then increase gradually. Also, absorption and permeability show a steep decrease when zinc stearate is added, and a slack decrease with the replacement of silica fume.