• Journal of Advanced Research in Ocean Engineering
• /
• 제4권2호
• /
• pp.47-52
• /
• 2018

The Korea Offshore Wind Power (KOWP) is planning to construct offshore wind energy farms with an overall rated power of 2.5 GW in the south-western coast of the country until 2019. Various types of support structures for offshore wind turbines have been proposed in the past. Nevertheless, in South Korea, jacket structures have in general, been applied as support structures for offshore wind turbines owing to the many accumulated experiences and know-how regarding this kind of support structure. The choice of offshore structure is mainly influenced by site conditions such as seabed soil type and sea environment during installation. In installing jacket sets on the seabed, the mudmat is necessary to maintain the equilibrium of the jacket without the aid of additional devices. Hence, this study proposes the installation of skirt plates underneath the bottom frame of jackets in order to improve the installation stability of jacket structures under rougher sea conditions. To confirm the effect of skirt plates, installation stability analyses considering overturning, sliding and bearing capacity have been performed. From the results, it is shown that jacket structures with skirt plates can contribute to improving the sliding stability of the structures of new wind power farms, while providing economic benefits.

• 한국가스학회지
• /
• 제14권2호
• /
• pp.1-6
• /
• 2010

고압가스 압력용기의 강도안전성을 FEM으로 해석하였다. 본 연구에서 고려한 강재용기의 내압은 서비스 충전압력 $9kg/cm^2$, 가스충전 최고압력 $18.6kg/cm^2$, 안전변 작동 최고압력 $24.5kg/cm^2$, 수압시험압력 $34.5kg/cm^2$이다. FEM 해석결과에 의하면, 서비스 충전압력 $9kg/cm^2$와 충전최고압력 $18.6kg/cm^2$에 대한 강도안전성은 가스용기에 걸리는 응력이 강재의 항복강도 이내에 있기 때문에 안전한 것으로 나타났다. 그러나 수압시험압력 $34.5kg/cm^2$을 가하였을 때에 발생하는 응력은 항복강도를 충분히 넘어서기 때문에 불안전하지만, 인장강도 이내에 존재하기 때문에 아직은 안전하다. 수압시험압력을 용기에 자주 공급하면 용기는 소성변형에 의한 피로잔류응력이 특히 하단반구부에 축적되므로 파손될 수 있다. 계산결과에 의하면, 스커트 지역에 작용하는 집중하중은 하단반구부에 영향을 미치지 않지만, 용기에 서 가장 취약한 부분은 용기의 몸체와 스커트 사이에 위치한 하단반구부의 중간부분임을 알 수 있다. 따라서 하단반구부의 형상은 고압가스 저장용기 설계에서 중요한 요소라는 것을 보여주는 FEM 해석결과를 제공하고 있다.

• 한국안전학회지
• /
• 제21권4호
• /
• pp.49-54
• /
• 2006

The evaluation of elastic-plastic fracture characteristic was investigated in ferrite steel SA 516- Gr70 used for reactor coolant piping elbow and support skirt of pressure vessels. This paper describes the effect of temperature on J-R curve characteristic of this material. The elastic-plastic fracture mechanics parameter J is obtained with unloading compliance method. The test method were analyzed according to ASTM E 813-89 and E 1152-89. Unloading compliance $J_{IC}$ tests were performed on 1 CT specimens at varied temperatures from $25^{\circ}C$ to about $400^{\circ}C$ using a high temperature extensometer. At all temperature, valid $J_{IC}$ measurements could be made and $J_{IC}$ decreased with increasing temperature. SEM fractography schematically illustrates microvoid initiation, growth and coalescence at the tip of a preexisting crack.

• 한국안전학회지
• /
• 제14권3호
• /
• pp.3-11
• /
• 1999

The atomic fuel rods between top and bottom end pieces of reactor need to be extended for high combustion rate of future-type fuel to increase the irradiation in the axial direction. For allowing axial extension of the fuel rods, the space between top and bottom end pieces should be expanded. Thus the thickness reduction of the flow plate is necessary. This study was carried out the mechanical strength test by using strain gages as a function of flow plate thickness, the existence of skirt and loading condition for the Korean Fuel Assembly(KOFA). The experimental apparatus was designed for load conditions, uniformly distributed load and displacement. Test method using whiffle tree of uniformly distributed load has been comparatively conservative. The test results were compared with those of finite element analysis and the test method on bottom end piece was established.

• 대한조선학회논문집
• /
• 제30권4호
• /
• pp.83-92
• /
• 1993

본고에서는 type B 독립구형 MRV 방식 LNG탱크의 극저온에 대한 구조안전성 평가기법을 연구 하였다. 여기에는 다음과 같은 3가지의 검토과정이 포함된다. 1) 탱크판을 관통하는 균열의 진전과정에서 누설되는 LNG의 양을 추정하고, 이에 따른 선체구조의 안전성을 보장하기 위하여 2차방벽의 설치범위를 결정한다. 2) 구형 LNG탱크시스템에 대한 정상상태 열전달해석 모형을 이용하여 화물창 및 스커트에 대한 온도분포해석을 수행하였다. 3) (2)항의 해석결과 가장 급격한 온도변화를 보이는 탱크와 스커트시스템의 연결부에 대한 열응력의 분포를 해석하였다.

• Journal of Advanced Research in Ocean Engineering
• /
• 제3권4호
• /
• pp.184-192
• /
• 2017

The Korea Offshore Wind Power (KWOP) cooperation is planning to construct offshore wind energy farms with an overall rated power of 2.5 GW along the southwestern coast by 2019. Hitherto, various structural types of support structures for offshore wind turbines have been being proposed, but these structures have lacked economic analysis studies. Therefore, their economical superiority to existing types has been difficult to guarantee. An offshore structure with economic efficiency will have a minimum amount of mobilizing equipment and short offshore construction period because of the application of rapid installation methods. Thus, the development of a new support structure with economic efficiency is generally considered to be necessary. Accordingly, this paper proposes a newly developed and more economical jacket type for the offshore support structure. This study confirmed its structural safety and performance by conducting a structural analysis and eigenvalue analysis. The manufacturing and installation costs were then estimated. As a result, the new jacket type of offshore support structure proposed in this study significantly reduced the manufacturing and installation costs. Therefore, it is expected that the proposed jacket will contribute to reducing construction expenses for new wind power farms and invigorating wind power farm businesses.

• Nuclear Engineering and Technology
• /
• 제53권1호
• /
• pp.93-102
• /
• 2021

The analysis of the fluid flow characteristics in reactor pressure vessel is an important part of the hydraulic design of nuclear power plant, which is related to the structure design of reactor internals, the flow distribution at core inlet and the safety of nuclear power plant. The flow distribution and mixing characteristics in the pressurized reactor vessel for the 1000MWe advanced pressurized water reactor is analyzed by using Computational Fluid Dynamics (CFD) method in this study. The geometry model of the full-scaled reactor vessel is built, which includes the cold and hot legs, downcomer, lower plenum, core, upper plenum, top plenum, and is verified with some parameters in DCD. Under normal condition, it is found that the flow skirt, core plate holes and outlet pipe cause pressure loss. The maximum and minimum flow coefficient is 1.028 and 0.961 respectively, and the standard deviation is 0.019. Compared with other reactor type, it shows relatively uniform of the flow distribution at the core inlet. The coolant mixing coefficient is investigated with adding additional variables, showing that mass transfer of coolant occurs near the interface. The coolant mainly distributes in the 90° area of the corresponding core inlet, and mixes at the interface with the coolant from the adjacent cold leg. 0.1% of corresponding coolant is still distributed at the inlet of the outer-ring components, indicating wide range of mixing coefficient distribution.

• 한국융합학회논문지
• /
• 제11권7호
• /
• pp.163-167
• /
• 2020

본 연구에서는 피스톤 헤드의 형상별 열응력해석을 진행하여 내구성이 있는 피스톤의 형상을 고찰하기 위한 연구를 진행하였다. 그 결과로서는 온도가 가해지는 부분에서부터 거리가 멀수록 낮은 온도를 볼 수 있다. 피스톤 헤드의 형상에 따라 열을 받는 면적이 다르기 때문에 피스톤 기둥 부분과 스커트부에 영향을 끼치게 된 점을 볼 수 있었다. 본 연구에서는 세 모델이 동일하게 피스톤 헤드의 중심부에서 가장 적은 응력이 나오는 것을 알 수 있었다. Model A는 다른 두 모델에 비해 항복이 발생하는 응력이 가장 작은 것을 알 수 있었다. Model B는 접시형 피스톤헤드로서 피스톤 헤드부가 오목한 형상으로 되어 있어 피스톤 헤드 중심부에서는 주변 부분에 영향을 가장 덜 끼치는 모델임을 알 수 있었다. Model C는 항복이 발생하게 되는 응력이 가장 크게 보였다. 또한 본 연구결과는 내구성이 있는 피스톤의 형상 설계에 유용하게 적용할 수 있다고 사료된다. 피스톤 헤드의 형상에 따른 열응력 해석을 적용함으로서, 본 연구가 미적인 융합에 부합된다고 사료된다.

• 한국복식학회:학술대회논문집
• /
• 한국복식학회 2001년도 19th International Costume Association Congress
• /
• pp.81-81
• /
• 2001

R.O.C. has experienced successively the development of previous dynasties that creates out the unique traditional culture of each stage. The Chinese nation is not a one-fold race; each dynasty absorbs the culture of the outside race. It is Tang Dynasty blends mutually however yield unusually brilliant results. The Tang Dynasty's national strength is forceful and the economy is prosperous. Above all, social custom and current of thought both break the constraint of previous dynasties' conservative thinking and keep positive and aggressive. While in the contact with extraterritorial culture, not only changes the feminine social status, but also produces unprecedented innovation and reform on the feminine dress. The Tang Dynasty's varied feminine suit is affected by the western regions of China culture, such as expose of chest, low collar, short top garment and skirt with narrow sleeves or wide sleeves, sleeve gown with plate collar or turndown collar, man's wear, and military dress, etc. An epoch can be known by Tang Dynasty feminine dress's special features, for example, the make-up of Tang-Shien-lon's Uan-Ho period presents dress style of late Tang days. However, the Chinese people compete mutually pursuing the strange costume, and accepting different cultural incitement This reveals that the changes of popular culture would result in the big transform of the Tang's dress style. This paper studies inherit of Tang Dynasty's culture and east-spread of the western regions of China culture. While understanding the Tang's favor in the western regions of China customs, all follow the western regions of China without exception, such as dance music, painting, dress, food, amusement, etc. Because of emperor's progressive race policy and forgiveness attitude to the foreign tribe that makes Tang Dynasty's feminine dress much easier to accept and blend the special features of the foreign tribe culture. While joined with west culture, and pick the dress's essence of the western regions of China, the original possessed of culture consciousness and esthetic sense improve and create their own dress, as well as enrich more inner part of dress art and the spirit.

• 복식
• /
• 제59권8호
• /
• pp.49-65
• /
• 2009

As basic materials in this research, 874 pieces of engraving that recorded the garment produced by diverse authors in the 17-18th century were collected among the collections of male and female garment in the engraving kept by National Library of France and 216 pieces of engraving were classified among them to observe justaucorps as stated in the materials. Since type of justaucorps in the 18th century can be classified by difference in shape and change through the above engraving materials in large quantity and the shape and composition can be compared and analyzed with other materials such as picture, stored garment, written materials without difficulty, the chronology can be composed by single type of justaucorps. Intending to understand the change in composition caused by type classification and pattern making as per analysis of type property of justaucorps, the men's upper garment in France in the 18th century. Checking change in design per from and materials, justaucorps of 1680-1700s was in silhouette where waist in the length above knee was adhered and slightly spread to lower part. In the type of 1710-1750s, waist adhered remarkably and many pleats were made under waist to produce volume of form that spread to lower part like skirt. In the type of 1760-1780s, straight silhouette was attached to whole body and end of front adjustment in slant line turns to rear part. The developmental aspect of construction can be checked by making pattern. Changing the cutting line of body plate to smoothly connect section and to try to adhere to the body, the development of simpler and delicate pattern production technique was confirmed.