• Journal of the Korean Wood Science and Technology
• /
• v.39 no.6
• /
• pp.481-489
• /
• 2011

This study was conducted to evaluate the pressure treatment characteristics of Japanese red pine and Japanese larch skin timber with ACQ-2, CUAZ-2 and CuHDO-1. The effect of moisture content (MC) on preservative treatability was investigated for Japanese red pine sapwood and Japanese larch heartwood, and fixation characteristics of CCA alternatives was also evaluated. Japanese red pine sapwood, which was dried below 30 percent MC, was fully penetrated with preservatives, and minimum requirement of preservative retention for the hazard class H3 was achieved. Through measuring preservative retention gradient in Japanese red pine sapwood, it was confirmed that the retention gradient of CuHDO-1 was steeper than that of both ACQ-2 and CUAZ-2. In particular, it was intensified at a higher MCs of wood samples (25∼30%). Japanese larch heartwood did not meet the minimum requirement of penetration and retention for the hazard class H3 over the range of pretreatment MCs tested. With presteaming under $121^{\circ}C$ for 12 hours, the treatability of Japanese larch heartwood was enhanced to meet the minimum requirement for the hazard class H3. The fixation rate of copper was much more faster under drying condition compared with nondrying condition; more than 95% of copper were fixed in 3~6 days and 1 day under drying conditions in Japanese red pine sapwood and Japanese larch heartwood, respectively. After 3-week fixation period at ambient temperature, the amount of mobile copper in treated wood sample that remains available for leaching from treated wood was the highest in the wood samples treated with ACQ-2, followed by CuHDO-1 and CUAZ-2. It was proportional to the amount of copper in treating solution.

• Journal of Navigation and Port Research
• /
• v.26 no.1
• /
• pp.106-111
• /
• 2002

The estimation of pile bearing capacity is important since the design details are determined from the result. There are numerous ways of determining the pile design load, but only few of them are chosen in the actual design. According to the recent investigation in Korea, the formulas proposed by Meyerhof based on the SPT N values are most frequently chosen in the design stage. In the study, various static and dynamic formulas have been used in predicting the allowable bearing capacity of a pile. Further, the reliability of these formulas has been verified by comparing the perdicted values with the static and dynamic load test measurements. Also, in most cases, these methods of pile bearing capacity determination do not take the time effect consideration, the actual allowable load as determined from pile load test indicates severe deviation from the design value. The principle results of this study are summarized as follows : As a result of estimate the reliability in criterion of the Davisson method, t was showed that Terzaghi & Peck >Chin>Meyerhof > Modified Meyerhof method was the most reliable method for the prediction of bearing capacity. Comparisons of the various pile-driving formulas showed that Modified Engineering News was the most reliable method. However, a significant error happened between dynamic bearing capacity equation was judged that uncertainty of hammer efficiency, characteristics of variable, time effect etc... was not considered. As a result of considering time effect increased skin friction capacity higher than end bearing capacity. It was found out that it would be possible to increase the skin friction capacity 1.99 times higher than a driving. As a result of considering 7 day's time effect, it was obtained that Engineering news, Modified Engineering News, Hiley, Danish, Gates, CAPWAP(CAse Pile Wave Analysis Program) analysis for relation, repectively, $Q_{u(Restrike)} / Q_{u(EOID)} = 0.98t_{0.1}$ , $0.98t_{0.1}$, $1.17t_{0.1}$, $0.88t_{0.1}$, $0.89t_{0.1}$, $0.97t_{0.1}$.

• Journal of the Korean Applied Science and Technology
• /
• v.41 no.1
• /
• pp.9-18
• /
• 2024

Smilax china is known for its excellent antimicrobial, antioxidant, and anti-inflammatory properties. As a foundational study for applying the functionality of Smilax china extracts to cosmetics, it is necessory to investigate the concentration-dependent skin permation characteristics of the flavonoids in the extract, namely quercetin, catechin, and naringenin. Therefore, it serves as a crucial method for conducting this basic research on the functional aspects fo Smilax china extracts for cosmetic applications. This investigation focused on examining the percutaneous permeability characteristics of flavonoids originating from Smilax china. Applying Marzulli's definition, the Kp value of quercetin was categorized as "fast" at 0.1 mg/mL and "moderate" at 0.2 and 0.4 mg/mL. Notably, the permeation rate exhibited a decline with increasing concentration. For naringenin, Flux values were 0.69, 1.07, and 1.42 ㎍/hr/cm² at concentrations of 0.1, 0.2, and 0.4 mg/mL, respectively, with corresponding Kp values of 6.95, 5.34, and 3.56. Naringenin's Kp value fell into the "moderate" category across all concentrations, and as observed with quercetin, the permeation rate decreased with higher concentrations. Likewise, for catechin, Flux values were 0.75, 1.09, and 1.66 ㎍/hr/cm², and corresponding Kp values were 7.55, 5.46, and 4.16. Catechin's Kp value was consistently classified as "moderate" across all concentrations. The efficacy of quercetin, catechin, and naringenin, active ingredients in high-performance and anti-inflammatory Smilax china extracts, was found to exhibit skin penetration properties above the average. This confirms their suitability as excellent natural materials for use in functional cosmetics, given their outstanding capabilities in preventing acne and reducing inflammation.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.2
• /
• pp.185-198
• /
• 2019

Human tissue undergoes aging by the oxidant damage via structural change and its physical properties. The skin aging process is well known and many evaluations have been conducted. However, studies on hair aging were relatively few and thus care for aging hair is difficult. This study aims to fabricate an aging hair and identify anti-aging effect with known ingredient in anti-aging. First of all, physical properties of aging hair of age 60s by physiologically intrinsic factors were compared to those of the hair made by various extrinsic factors such as several chemical reactions and iteration numbers of the treatments. The extrinsic aging hair of this study relates to the less amount of lipid and to the hair of perm treated once accordingly, wherein several physical properties, preferably comprise roughness and tensile strength, present a novel concept of the intrinsic aging hair. The penetration of peptide into the aging hair was leading the extrinsic hair towards more structurally directed a younger hair. In addition to the structural change, the penetration of the peptide enhanced texture and tensile strength of the aging hair. These patterns have been also found in addition of propolis. For the first time, these qualitative studies exhibit that indeed our extrinsic aging hair well describes the anti-aging efficacy as a receptor for a cross-linker and the ingredients of human hair.

• Journal of the Korean Society of Radiology
• /
• v.6 no.3
• /
• pp.207-215
• /
• 2012

As one of photo dynamic therapies, the existing LED photo irradiation method with 635 nm continuous wave has most frequently been used for acne treatment, it suffered from a low energy efficiency and generation of a large amount of heat in tissues requiring improvement measures. In this thesis, a LED photo irradiation system for acne treatment has been designed using PWM(Pulse Width Modulation) mode to enhance the energy efficiency and prevent thermal destruction in tissues. System configuration consisting largely of timer module, PWM module, and photo transfer device has been designed with the use of 1 W LED at a wavelength of 660 nm for the photo transfer device to increase skin penetration depth for treatment of acne. Frequency and wave form generated by using PWM control was verified along with confirmation of output energy of 660 nm LED and surface temperatures of tissues, followed by evaluation of stable energy outputs and stability of tissues. The results indicated that whereas power loss was high and thermal destruction in tissues was exhibited when C.W mode was used to obtain the optical energy of 1 W LED at a wavelength of 660 nm for acne treatment, realization of PWM mode allowed lowering of power consumption for LED through pulse width modulation, and no occurrence of thermal destruction in tissues, suggesting that PWM mode is safer and more effective for treatment of acne than C.W mode.

• Journal of Bio-Environment Control
• /
• v.18 no.4
• /
• pp.492-501
• /
• 2009

This study was carried out to investigate influence of tree height on vegetable growth, productivity, and labor input in 5 year old slender spindle 'Fuji'/M.9 apple trees planted with the tree space of $3.2{\times}1.2m$ and trained to the tree height of 2.5m in the apple orchard of Apple Research Station, NIHHS, RDA in Gunwi County, Korea. Tree height was extended to the tree height of 4.0m for two years. And then, the tree height was restricted to 2.5 (control), 3.0, 3.5, and 4.0m in 8th year. Yield per 10a was 46, 25, and 4% higher at the tree height of 4.0, 3.5, and 3.0m than at the tree height of 2.5m respectively in first year and 17, 12, and 10% higher respectively, indicating the taller tree, the higher yield. Soluble solid contents was highest in the height of 2.5m than in any other treatments for 2 years, but fruit skin color was not clear. Labor input was increased parallel with the increase of tree height, but yield per labor input was decreased. Gross income and net income per 10a were increased parallel with the increase of tree height in first year, but not increased in second year. In considering production, labor input, and economic efficiency, the optimum tree height of slender spindle 'Fuji'/M.9 apple planted with the tree space of $3.2{\times}1.2m$ was presumed to be 3.0~3.5m.

• Food Science and Preservation
• /
• v.16 no.2
• /
• pp.139-146
• /
• 2009

Whole and stem-off cherry tomatoes were packaged using perforated films(LF05, LF10, LF20, and LF40). Gas composition(ethylene, $O_2$, and $CO_2$), firmness(compression and penetration force), color, brix degree, acidity, and total microbial counts were assessed during storage at $10^{\circ}C$ and 85% relative humidity. Gas composition varied with film gas permeability, indicating that modified atmospheric(MA) conditions were achieved. Firmness fell during storage; samples packed using LF05 showed the lowest firmness, corresponding to low gas transmission conditions. L(lightness) and a(redness) values respectively decreased and rose slightly with increasing storage time, but the b(yellowness) values fell notably. Film permeability significantly affected acidity and soluble solid levels. When LF40 packaging was used, acidity and brix scale changes were similar to those seen after PET container packaging. Total microbial counts increased with time after packaging in most films, and pretreatment differences were not significant. Microflora varied between stem on/off tomatoes. Skin wrinkling and juice appearance were common in tomatoes stored in PET containers and LF films of low gas permeabilities(LF05, LF10, and LF20). White molds were partially found on stem-on tomatoes stored using packaging systems. When film packagings were compared, LF40 was optimal, permitting minimal pretreatment yet offering maximal sanitation.

• Advances in Traditional Medicine
• /
• v.1 no.1
• /
• pp.8-27
• /
• 2000

Components of extracellular matrix and the matrix-degrading enzymes are some of the key regulators of tumor metastasis and angiogenesis. Hyaluronic acid (HA), a matrix glycosaminoglycan, is known to promote tumor adhesion and migration, and its small fragments are angiogenic. Until now, we have compared levels of hyaluronidase, an enzyme that degrade HA, in normal adult prostate, benign prostate hyperplasia and prostate cancer tissues and in conditioned media from epithelial explant cultures, using a substrate (HA)-gel assay and ELISA-like assay (Kim et al., unpublished results). The present review described an overall characterization of hyaluronidases and its application to human diseases. The hyaluronidases are a family of enzymes that have, until recently, deed thorough explication. The substrate for these enzymes, hyaluronan, is becoming increasingly important, recognized now as a major participant in basic processes such as cell motility, wound healing, embryogenesis, and implicated in cancer progression. And in those lower life forms that torment human beings, hyaluronidase is associated with mechanisms of entry and spread, e.g. as a virulence factor for bacteria, for tissue dissection in gas gangrene, as a means of treponema spread in syphilis, and for penetration of skin and gut by nematode parasites. Hyaluronidase also comprises a component of the venom of a wide variety of organisms, including bees, wasps, hornets, spiders, scorpions, sh, snakes and lizards. Of particular interest is the homology between some of these venom hyaluronidases and the enzyme found in the plasma membrane of mammalian spermatozoa, attesting to the ancient nature of the conserved sequence, a 36% identity in a 300 amino acid stretch of the enzyme protein. Clearly, hyaluronidase is of biological interest, being involved in the pathophysiology of so many important' human disorders. Greater effort should be made in studying this family of enzymes that have, until recently, been overlooked. Also, oriental medical application of the hyaluronidase will be discussed with respect to inhibition and suppression of inflammation and malignacy.

• Archives of Pharmacal Research
• /
• v.28 no.9
• /
• pp.1002-1012
• /
• 2005

5-Substituted 4-oxo-2-thioxo-1,,2,3,4-tetrahydropyrimidine were synthesized by interaction of 4­oxo-2-thioxo-1,2,3,4-tetrahydropyrimidine-5-sulfonylhydrazide with some aldehydes to give the corresponding Schiff-bases, which after cyclization gave corresponding thiazolidinones. For some of the thiazolidinones, Mannich bases reaction was carried out. All the derivatives were tested for their possible inhibitory effect on Schistosoma mansoni cercarial elastase (CE). Only, N'-(4-methylbenzyledine)-4-oxo-2-thioxo-1,2 ,3,4-tetrahydropyrimidine-5-sulfonylhydrazide was found to have potent inhibitory effect on the CE activity with $IC_{50} = 264{\mu}M.$ Upon its use as a paint for mice tails before infection with S. mansoni cercariae, the compound formulated in jojoba oil caused a significant reduction ($93\%$; P-value = 0.0002) in the worm burden. IgG & IgM in mice sera were measured by using several S. mansoni antigens by ELISA. Sera from treated infected mice (TIM) 2, 4, and 6 weeks (W) post infection (PI) showed 1.2 folds lower, 1.2 folds higher, 1.7 folds lower IgM reactivity against soluble cercarial antigenic preparation (CAP), respectively, when compared with sera collected from infected untreated mice (IUM). Sera from TIM 2, 4, and 6WPI showed 1.3, 1.6, and 1.7 folds higher IgG reactivity, respectively against CAP than the IgG reactivity from IUM. Sera from TIM 2, 4 and 6WPI showed 1.5, 1.2 folds lower and 1.4 folds higher IgM reactivity, respectively against soluble worm antigenic preparation (SWAP) when compared with sera collected from IUM. Sera from TIM 2, 4, and 6WPI showed 1.4, 1 folds lower and 1 fold higher IgG reactivity, respectivley to SWAP when compared with sera from IUM. Sera from TIM 2, 4, and 6WPI had generaly lower IgM and IgG reactivities against soluble egg antigen (SEA) when compared with sera from IUM.

• Journal of Bio-Environment Control
• /
• v.19 no.3
• /
• pp.135-139
• /
• 2010

This experiment was conducted to investigate the difference among 3-years-used polyolefin films which were J-l, J-2 and J-2 having differences in film thickness, infrared absorption and ultraviolet penetration from Jan. 16, 2006. And 1-year-used polyethylene film K-1 used from Jan. 16, 2009, for covering film of greenhouse for oriental melon cultivation. J-2, J-3 and J-1 films were better for keeping heat in order, and J-2 film was the best in plant growth at early stage. The first blooming and harvesting days in J-2 film were earlier 15 days than those in K-1 film. Chromaticity and soluble solid of harvested fruit in J-2, J-3 and J-1 films were higher than whose in K-1 film. Marketable yields in J-2, J-3 and J-1 films were higher in order.