• Journal of electromagnetic engineering and science
• /
• 제3권1호
• /
• pp.45-49
• /
• 2003

Wireless life signal detecting system is implemented with using the mechanism of Doppler Effect. This system can measure the respiration and heart rates with the periodic movement of skin and muscle near the heart. The system is consisted of antenna, RF transmitter, receiver, and display part. We did use two operating frequencies at 1.9 ㎓ and 10 ㎓. Firstly, the link budget about detecting system is analyzed and the signal detected from the system is compared with electrocardiogram(ECG) of monitor which is using for patient monitoring in hospital. Secondly, the detection of vital sign is also performed according to the different distances, and including behind the wall.

• 에너지공학
• /
• 제21권2호
• /
• pp.168-178
• /
• 2012

본 연구는 업무용 건물에 적용되는 이중외피의 성능을 설계단계에서 평가할 수 있는 정량적인 평가방법을 정립하기 위한 기초적인 평가 수행을 목적으로 하였다. 이를 위하여 평가대상 건물을 선정하여 이중외피 적용을 위한 설계안에 대하여 이중외피 적용 전후의 연간 냉난방 부하를 동적 열부하 해석 프로그램을 이용하여 수행하였으며, 보다 현실적인 평가 결과의 도출을 위하여 CFD를 활용한 풍압계수 도출 및 이를 적용한 환기량 해석을 병행하였고, 이중외피의 환기구 및 중공층 내부의 차양 제어를 위한 모드 설정 및 제어를 통하여 이중외피의 적용 및 제어에 따른 효과를 보다 현실적으로 수행할 수 있는 기법을 제안하였다. 이를 통하여 대상 건물에 대한 이중외피 적용에 따른 연간 냉난방부하를 해석하여 적용 효과를 정량적으로 도출할 수 있는 가능성을 확인하였으며, 이중외피의 형태에 따른 중공층 환경 변화를 확인하였다.

• 한국산학기술학회논문지
• /
• 제13권4호
• /
• pp.1419-1426
• /
• 2012

KNU 식물공장 모델의 냉난방 에너지 부하를 DesignBuilder를 이용하여 해석하였다. 실내설정온도, LED 보광주기, LED 보광량, 유리외피의 구조에 따른 에너지 소모량을 분석하였다. LED 보광이 없는 식물공장의 실내설정온도를 상추의 적정 생육온도인 $20^{\circ}C$를 중심으로 $15^{\circ}C$, $25^{\circ}C$로 변화시키면서 일정온도로 유지하는데 필요한 연간 냉난방부하를 분석하였다. $15^{\circ}C$일 때 냉방부하, $25^{\circ}C$일 때 난방부하가 가장 크게 나타났다. 상추 재배에 필요한 LED 보광 적용 시 난방부하는 감소하지만 냉방부하가 약 6배 증가한다. 또한 LED 보광 시 주간보다는 야간보광이 냉난방부하 감소에 유리한 결과를 주었다. 식물공장 외피가 냉난방부하에 미치는 영향을 비교하기 위하여 다섯 가지 종류의 외피를 적용하여 계산하였다. 이중창호의 열관류율이 작을수록 식물공장의 난방부하는 감소하고 냉방부하는 증가하였다. 재배할 작물의 적정생장온도 설정, LED 및 재배설비의 내부발열량에 따른 적절한 외피선택, 다양한 패시브 및 액티브 에너지 절감기술의 적용으로 냉방부하를 감소시키는 것이 식물공장 운영에 중요한 요소로 판단된다.

• Fibers and Polymers
• /
• 제6권4호
• /
• pp.343-347
• /
• 2005

The purpose of this study was to investigate the appropriate amounts of phase change materials to give objective and subjective wear sensations. Vapor-permeable water-repellent fabrics with (WR-PCM) and without (WR) octadecane containing microcapsules were obtained by wet-porous coating process. Then, calculating the area of the WR-PCM treated clothes, we estimated the total calories of the clothing by multiplying the heat of fusion and heat of crystallization of PCM to the calculated area. Wear tests were conducted in both warm environment $(30^{\circ}C,\;65\%\;RH)$ and cold environment $(5^{\circ}C,\;65\%\;RH)$ with sports warm up style experimental garments made with WR and WR-PCM fabrics. Rectal, skin, and clothing microclimate temperatures, saliva and subjective evaluation measurements were done during the wear test. There was no difference of rectal and mean skin temperatures between WR and WR-PCM, but the clothing microclimate temperature of WR-PCM under warm environment was slightly lower than that of WR. In cold environment, WR-PCM showed much higher temperature than in WR. Saliva change did not appear between clothes, but did between two environments. Although subjective sensation between WR and WR-PCM was not significantly different, WR-PCM was rated as cooler than WR in warm environment and as warmer than WR in cold environment. The results of this study indicated that octadecane containing microcapsules in water-repellent fabric provide cooling effect.

• 한국의류학회지
• /
• 제16권3호
• /
• pp.285-298
• /
• 1992

In this study, bedclimate was investigated depending on various bedquilts used oin ondol in summer. The environmental room condition was maintained at 26: $1^{\circ}C,\;75{\pm}3\%$ R.H., while the ondol surface was kept at $25{\pm}1^{\circ}C$ without heating. The types of bedquilts were hemp, cotton, quilt made of polyester padding with polyester/cotton cover. Two healthy young women were subjected for seven hours' sleep with two replications for this study. The results are as follows. 1) The range of the temperature under the mattress ($25.2\~32.4^{\circ}C$) was lower than that of the temperature on the mattress ($28.8\~35.5^{\circ}C$), or that of the temperature inside the bedquilts ($30.3\~34.4^{\circ}C$). The humidity inside the bedquilts increased during sleeping, and the range of R.H. was $58\~80\%$. 2) The ranges of bedclimate which subjects feel comfortable were $30.5\~33.8^{\circ}C$ on the mattress, $31.0\~34.9^{\circ}C$, $61\~74\%$ R.H. inside the bedquilts. At this range, the mean skin temper-ature of the subjects was $34.3^{\circ}C\~35.2^{\circ}C$. 3) When there was no heating, the weight of the bedding increased during sleeping, and the weight increase was largest in the case of mattress. 4) There were correlations among the skin temperature of three points of the body (abdomen, thigh, foot) and the temperature and R.H. inside the bedquilt. 5) The effect of the type of bedquilts on the microclimate and physiolosical responses were significant. 6) Generally, when there was no heating, the body heat was transferred to the ondol floor, in summer, heat was transferred mostly through the mattress.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제1권2호
• /
• pp.179-186
• /
• 2013

혈액순환촉진, 심혈관계치료, 피부질환, 암세포억제 등의 의료분야에 원적외선 치료법이 광범위하게 활용되고 있다. 본 연구에서는 원적외선 치료에 효과적인 패널형 방사체의 발열부에 대한 열적 특성을 실험적으로 분석하였다. 발열선은 정상상태에서 절연피복에 $150mW/m^2$의 열유속으로 열에너지를 공급하여 절연피복은 발열선 온도의 20%에 도달하였다. 단열막 사용은 약 20%의 발열판 표면온도 증가효과가 있었으며 열시상수를 상승시켜 혈액순환촉진에 크게 기여하는 것으로 나타났다. 발열선의 배치간격이 발열부 설계에 중요한 인자이며 열확산의 중첩을 위해 발열판의 열전도계수와 밀도를 고려해야함을 알 수 있었다.

• 대한본초학회지
• /
• 제32권4호
• /
• pp.17-24
• /
• 2017

Objectives : Advanced glycation end products (AGEs) is bind formation of glucose and protein. Acceleration of AGE formation during hyperglycemia is associated with the pathogenesis of diabetic complications and causes kidney and skin damage. The aim of this study was investigated the AGEs inhibitory activity and antioxidant activity of water extracts from young persimmon (YP) and heated young persimmon (HYP). Methods : Paeoniae Radix Alba (YP) is prepared by heating with 30% ethanol. AGEs formation inhibitory activities of YP and HYP measured using bovine serum albumin. To evaluate the protective effects of YP and HYP in diabetic rats induced with streptozotocin (STZ) and methyl glyoxal (MGO), SD rats were distributed into four groups; normal mice (Nor), AGEs-induced rats (Con), AGEs-induced rats treated with 100 mg/kg YP (YP), AGEs-induced rats treated with 100 mg/kg heated YP (HYP) for 3weeks. Heated young persimmon respectively decrease AGEs construction. Results : YP and HYP administration inhibited the biomarkers of AGEs in serum, kidney and skin tissues. AGE-induced rats revealed that the significant decreased collagen however, heat processing methods of young persimmon up regulated inhibits AGEs-induced collagen decrease. The expressions of AGEs were decreased in YP and HYP treated group compared with the control group in tissues. It specifies that HYP has potential to serve as a positive regulator of via AGEs path way. Conclusion : It has proposed that may have an improvement effect on diabetic complications, heated young persimmon has AGEs inhibitory excellent activities and antioxidant effect.

• Composites Research
• /
• 제30권3호
• /
• pp.181-187
• /
• 2017

나노 및 마이크로 크기의 철(Fe), 마그네타이트($Fe_3O_4$) 및 니켈(Ni) 입자가 분산된 열가소성 폴리우레탄(TPU) 접착필름에서 각 금속의 크기 및 형상 그리고 피착재의 종류에 따른 접착필름의 유도가열 거동을 연구하였다. 연구결과 동일한 첨가량 및 유사한 입자 크기에서 철과 니켈이 분산된 열가소성 TPU 접착필름에 비해 마그네타이트가 분산된 TPU 접착필름의 발열이 높게 나타났다. 철과 니켈의 입자 크기가 자기장의 표면 침투 깊이(Penetration skin depth) 보다 클 경우 와전류에 의한 발열로 인해 입자 크기가 커질수록 초기 승온속도와 최고 온도가 증가하는 것을 확인하였다. 서로 다른 형태를 갖는 니켈 입자를 사용한 유도가열 실험 결과 편상(flake)의 입자가 TPU 접착필름에 분산되었을 때 자기이력(Magnetic hysteresis)에 의한 열 발생으로 가장 높은 발열이 나타남을 알 수 있었다. 또한 금속 입자가 분산된 TPU 접착필름이 서로 다른 피착재에 적용되었을 때 발열현상이 상이하게 나타났으며 피착재의 열전도도에 따른 결과를 확인하였다.

• 대한인간공학회지
• /
• 제30권4호
• /
• pp.509-515
• /
• 2011

Objective: The study was performed to suggest factors to consider when making or selecting protective clothing to enhance farmers' health. The purpose of this study was to review and summarize the agricultural safety technology on clothing including hat, gloves, and shoes. Background: The farmers' work clothing has to meet a multitude of requirement. Risk factors in farm-work were identified by previous researches. Agricultural safety clothing needs to be introduced. Method: We reviewed previous papers regarding the agricultural workers' health, safety clothing to protect body from excessive heat and humid environment, ultraviolet(UV) protection, and hazardous body working postures. Also the UV cut effect, pesticideproof clothing, and preventable farm work related musculoskeletal disorders were discussed. Results: The agricultural safety clothing needs to be developed to provide comfort and to be resistant against heat. The UV protection function on skin and eyes has not been fully researched in safety clothing studies yet. Conclusions and Application: The farmers' work-related body posture needs to be studied in order to make and design agricultural safety clothing. The safety issues on agricultural work shoes are also needed to be included in future studies.

• Journal of Mechanical Science and Technology
• /
• 제14권6호
• /
• pp.690-698
• /
• 2000

The laminar boundary layer flow and heat transfer of anisotropic fluids in the vicinity of a wedge have been examined with constant surface temperature. The similarity variables found by Falkner and Skan are employed to reduce the stream wise-dependence in the coupled nonlinear boundary layer equations. The numerical solutions are presented using the fourth-order Runge - Kutta method and the distribution of velocity, micro-rotation, shear and couple stresses and temperature across the boundary layer are plotted. These results are also compared with the corresponding flow problems for Newtonian fluid over wedges. It is found that for a constant wedge angle, the skin friction coefficient is lower for micropolar fluid, as compared to Newtonian fluid. For the case of the constant material parameter K, however, the magnitude of velocity for anisotropic fluid is greater than that of Newtonian fluid. The numerical results also show that for a constant wedge angle with a given Prandtl number, Pr = I, the effect of increasing values of K results in increasing thermal boundary layer thickness for anisotropic fluid, as compared with Newtonian fluid. For the case of the constant material parameter K, however, the heat transfer rate for anisotropic fluid is lower than that of Newtonian fluid.