• Title/Summary/Keyword: Skin active point

Search Result 21, Processing Time 0.029 seconds

A Study on the circuit design and measurement method for the measurement of active points on skin (피부 활성점 측정을 위한 회로설계 및 측정방법연구)

  • Kim, Min Soo;Cho, Young Chang
    • Journal of IKEEE
    • /
    • v.24 no.3
    • /
    • pp.713-718
    • /
    • 2020
  • The method of measuring skin active points is a technique for obtaining a lot of biometric information because it is measured with convenience, low cost and non-invasive methods. In this paper, we used in a three electrode measure method that has the advantage of measuring the impedance of the APs under the skin. The impedance measuring method is well illustrated by a simple model of an equivalent electrical circuit that correlates well with experimental results. The characteristic frequencies of APs are about 15-30HZ higher than that of surrounding skin and the values of measured reactance are about 35-77KΩ smaller. This technology analyzed accurately and objectively the reactance and characteristic frequency of APs and the surrounding skin using a non-invasive measuring system.

Synthesis and Surface Active Properties of Long Chain N-Acyl Collagen Derivatives (고급 지방산 N-아실 콜라겐 유도체의 합성 및 계면활성)

  • Kim, T.Y.;Nam, K.D.;Nam, S.I.;Ahn, J.H.;Lee, J.H.
    • Journal of the Korean Applied Science and Technology
    • /
    • v.10 no.2
    • /
    • pp.81-90
    • /
    • 1993
  • The Surfactants composed of acylated aterocollagen which is produced by the acylation of the side chain amino radicals of aterocollagen with an aliphatic acid having 12 to 18 carbon atoms will be discussed in this study. This condensation is done at moderate reaction temperature (<$25^{\circ}C$) in aqueous alkaline solution. The products of this reaction were identified by UV/VIS spectroscopy and infrared spectroscopy. For these compounds, surface active properties and physical properties including isoelectric point, Krafft point, surface tension, critical micelle concentration(cmc), foaming power, viscosity behaviour, water holding capacity, skin irritation and emulsifying power were measured respectively. The experimental results received that the products have a good emulsifying power, excellent water holding capacity while having low skin irritation. Thus, these derivatives will be expected to be used as an emulsifying agent for O/W type cosmetic emulsion.

Feature Detection and Simplification of 3D Face Data with Facial Expressions

  • Kim, Yong-Guk;Kim, Hyeon-Joong;Choi, In-Ho;Kim, Jin-Seo;Choi, Soo-Mi
    • ETRI Journal
    • /
    • v.34 no.5
    • /
    • pp.791-794
    • /
    • 2012
  • We propose an efficient framework to realistically render 3D faces with a reduced set of points. First, a robust active appearance model is presented to detect facial features in the projected faces under different illumination conditions. Then, an adaptive simplification of 3D faces is proposed to reduce the number of points, yet preserve the detected facial features. Finally, the point model is rendered directly, without such additional processing as parameterization of skin texture. This fully automatic framework is very effective in rendering massive facial data on mobile devices.

A Study on Skin Health Knowledge and Treatment -The case of female college students major and non-major in skin care- (피부건강에 대한 인식과 관리에 관한 연구 -피부미용 전공과 비전공 여대생을 중심으로-)

  • Choi, Sung-Im;Kwon, Young-Nang;Lee, Geai-Young
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.7
    • /
    • pp.2886-2894
    • /
    • 2012
  • This study is intended to research female university students' concern with beauty care, their skin condition, knowledge and treatment comparing the majors with the non-majors in Seoul. This comparative study between them focused on their educational and behavioral differences in beauty care in the same living space, and the results were as follows: The majors' average point on the concern with skin health care was higher than the non-majors(p<.01). There were more combination skin type in the major group, and more dry skin type in the non-major group. Also, there were meaningful differences among the two groups in frequency of double cleansing after makeup, exfoliating, massaging or applying mask packs, using sunscreen(p<.01, p<.001, p<.01, p<.01). Further, intake rates of instant food and moisture were meaningfully different between them(p<.001, p<.05). In addition, the majors more tended to purchase cosmetics efficiently through lots of channels, and showed more active attitude to buy high-price cosmetics with outstanding properties although they have financial burden(p<.001). It was hoped that the results of this study would be used in skin care industry and education area in the future.

The Prevalence Rate of Tuberculin Skin Test Positive by Contacts Group to Predict the Development of Active Tuberculosis After School Outbreaks

  • Kim, Hee Jin;Chun, Byung Chul;Kwon, AmyM;Lee, Gyeong-Ho;Ryu, Sungweon;Oh, Soo Yeon;Lee, Jin Beom;Yoo, Se Hwa;Kim, Eui Sook;Kim, Je Hyeong;Shin, Chol;Lee, Seung Heon
    • Tuberculosis and Respiratory Diseases
    • /
    • v.78 no.4
    • /
    • pp.349-355
    • /
    • 2015
  • Background: The tuberculin skin test (TST) is the standard tool to diagnose latent tuberculosis infection (LTBI) in mass screening. The aim of this study is to find an optimal cut-off point of the TST+ rate within tuberculosis (TB) contacts to predict the active TB development among adolescents in school TB outbreaks. Methods: The Korean National Health Insurance Review and Assessment database was used to identify active TB development in relation to the initial TST (cut-off, 10 mm). The 7,475 contacts in 89 schools were divided into two groups: Incident TB group (43 schools) and no incident TB group (46 schools). LTBI treatment was initiated in 607 of the 1,761 TST+ contacts. The association with active TB progression was examined at different cut-off points of the TST+ rate. Results: The mean duration of follow-up was $3.9{\pm}0.9years$. Thirty-three contacts developed active TB during the 4,504 person-years among the TST+ contacts without LTBI treatment (n=1,154). The average TST+ rate for the incident TB group (n=43) and no incident TB group (n=46) were 31.0% and 15.5%, respectively. The TST+ rate per group was related with TB progression (odds ratio [OR], 1.025; 95% confidence interval [CI], 1.001-1.050; p=0.037). Based on the TST+ rate per group, active TB was best predicted at TST+ ${\geq}$ 16% (OR, 3.11; 95% CI, 1.29-7.51; area under curve, 0.64). Conclusion: Sixteen percent of the TST+ rate per group within the same grade students can be suggested as an optimal cut-off to predict active TB development in middle and high schools TB outbreaks.

Effect of stem cell culture on thermal stability (줄기세포배양액이 열 안정성에 미치는 영향)

  • Moon, Ji-Sun
    • Journal of the Korean Applied Science and Technology
    • /
    • v.38 no.1
    • /
    • pp.186-195
    • /
    • 2021
  • In this study, when stem cell culture solution is used as a cosmetic ingredient, one of the most prominent problems is that the ingredients generally have low thermal stability. Therefore, in this study, in order to find out how the stem cell culture medium is heated or preserved at high temperature, the effect of various effects of stem cells on the various effects of the stem cells was investigated. Investigated. As a result of the experiment, the wound healing assay confirmed that the cell migration increased after 6 hours, and after 24 hours, it was confirmed that the cell mobility was increased and cell division was promoted, thereby being concentrated. As a result of investigating the amount of transdermal water loss by preparing a cosmetic product containing stem cell culture solution, it was confirmed that the culture solution addition group showed an improvement rate of 31% compared to the non-added group, thereby helping in skin wound recovery. As a result of this, it is considered that this point should be considered when the stem cell culture medium is used as an active ingredient in cosmetics in the future.

Light 3D Modeling with mobile equipment (모바일 카메라를 이용한 경량 3D 모델링)

  • Ju, Seunghwan;Seo, Heesuk;Han, Sunghyu
    • Journal of Korea Society of Digital Industry and Information Management
    • /
    • v.12 no.4
    • /
    • pp.107-114
    • /
    • 2016
  • Recently, 3D related technology has become a hot topic for IT. 3D technologies such as 3DTV, Kinect and 3D printers are becoming more and more popular. According to the flow of the times, the goal of this study is that the general public is exposed to 3D technology easily. we have developed a web-based application program that enables 3D modeling of facial front and side photographs using a mobile phone. In order to realize 3D modeling, two photographs (front and side) are photographed with a mobile camera, and ASM (Active Shape Model) and skin binarization technique are used to extract facial height such as nose from facial and side photographs. Three-dimensional coordinates are generated using the face extracted from the front photograph and the face height obtained from the side photograph. Using the 3-D coordinates generated for the standard face model modeled with the standard face as a control point, the face becomes the face of the subject when the RBF (Radial Basis Function) interpolation method is used. Also, in order to cover the face with the modified face model, the control point found in the front photograph is mapped to the texture map coordinate to generate the texture image. Finally, the deformed face model is covered with a texture image, and the 3D modeled image is displayed to the user.

A Study on the Heating and Cooling Energy Load Analysis of the KNU Plant Factory (KNU 식물공장의 냉난방 에너지 부하 해석에 관한 연구)

  • Lee, Chan-Kyu;Kim, Woo-Tae
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.13 no.4
    • /
    • pp.1419-1426
    • /
    • 2012
  • The heating and cooling energy load of the KNU plant factory was analyzed using the DesignBuilder. Indoor temperature set-point, LED supplemental lighting schedule, LED heat gain, and type of double skin window were selected as simulation parameters. For the cases without LED supplemental lighting, the proper growth temperature of lettuce $20^{\circ}C$ was selected as indoor temperature set-point together with $15^{\circ}C$ and $25^{\circ}C$. The annual heating and cooling loads which are required to maintain a constant indoor temperature were calculated for all the given temperatures. The cooling load was highest for $15^{\circ}C$ and heating load was highest for $25^{\circ}C$. For the cases with LED supplemental lighting, the heating load was decreased and the cooling load was 6 times higher than the case without LED. In addition, night time lighting schedule gave better result as compared to day time lighting schedule. To investigate the effect of window type on annual energy load, 5 different double skin window types were selected. As the U-value of double skin window decreases, the heating load decreases and the cooling load increases. To optimize the total energy consumption in the plant factory, it is required to set a proper indoor temperature for the selected plantation crop, to select a suitable window type depending on LED heat gain, and to apply passive and active energy saving technology.

Treatment Using a Single-Lobed Rotation Flap in Diabetic Forefoot Ulceration: Five Case Reports (단일엽 회전 피판술을 이용한 당뇨병성 전족부 궤양의 치료: 5예 보고)

  • Kim, Jun-Beom;Lee, Bong-Ju;Kim, Cheol-U;Jung, Deukhee
    • Journal of Korean Foot and Ankle Society
    • /
    • v.23 no.4
    • /
    • pp.208-211
    • /
    • 2019
  • Diabetic foot ulcers can progress to the point where amputation is needed, and so these ulcers require active treatment. Skin grafts or flaps can be performed for coverage of this type of ulcer. Local flap surgery is relatively easy to perform and good results have been previously reported. We performed single-lobed rotation flap on 5 cases of forefoot ulcer around the site of weight bearing. The location of the foot ulcers was the medial part of the first metatarsophalangeal joint in all the patients. The mean size of the defect was 4.70 ㎠. Managing of ulcers, controlling of diabetes and infection, and improving of peripheral blood flow were performed before surgery. In two cases, infection progressed to the articular cartilage and so metatarsophalangeal joint fusions were performed simultaneously. All the cases were completely transplanted. There was no recurrence of the ulcers, and all the patients were able to walk.

Study on Diagnosis by Visual Inspection of Local Regions in Nei-Ching ("황제내경"의 국소부위 망형태(望形態)에 대한 연구)

  • Seo, Jae-Ho;Kim, Jeong-Kyun;Kim, Hyun-Ho;Park, Jin-Sung;Park, Young-Bae;Park, Young-Jae
    • The Journal of the Society of Korean Medicine Diagnostics
    • /
    • v.15 no.3
    • /
    • pp.235-244
    • /
    • 2011
  • Objectives: There are four types of diagnostic methods in Oriental medicine, and visual inspection is the first method among them. This study was written in order to complement further understanding on visual inspection. Methods: The authors reviewed a word related with visual inspection in Nei-Ching. The authors researched static words such as bigger/smaller, longer/shorter, slower/faster, curved/straight, one-sided/fair, and groove/uplift, and active words such as extension and contraction, shake, tremor, slow, fast, walk, run, standing, lying, and sitting related with visual inspection in Nei-Ching. Results: The static words linked with visual inspection are related with skin, muscles, fat, and especially the liver, stomach, and large intestine. The active words linked with visual inspection are related with movement of muscles, fat, and bone. Conclusion: In this study, the authors provided further understanding on visual inspection in Nei-Ching. However, there was no clear reference point about appearances and movements.