• 한국환경과학회지
• /
• 제3권2호
• /
• pp.177-184
• /
• 1994

An air suction skimmer was selected as a potable skimmer to be developed among the many reviewed skimmers because of its advantages such as simple structure, excellent transportability, and easy deployment. A prototype of the skimmer was fabricated. It was shown that the skimmer operated by a commercial vacuum cleaner has good performance. The maximum suction rate of water and the maximum suction head were 18$m^3$/hr and 2.7m, respectively.

• 한국안전학회지
• /
• 제10권1호
• /
• pp.41-49
• /
• 1995

A potable oil skimmer is in need to remove spilt oils before they spread, which is applicable to various situations of oil viscosity, spill location, current, tides, waves and wind. An air suction skimmer was selected to be developed because of its advantages such as simple structure, excellent transportability, and easy deployment. A prototype operating by a commercial vacuum cleaner was fabricated. Tests of the skimmer showed good performance : the maximum suction rate of water and suction head were 18㎥/h and 2.7m, respectively.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.123-128
• /
• 2000

The ocean is now increasingly suffering from pollution mainly caused by oil spill accidents roil increasing marine transportation. It cause not only the deterioration of ocean resources but also critical damage on the ocean ecosystem. Present study is an experimental one for the development of the oil skimmer which can collect spilled-oil actively and effectively from the sea surface. As an effort of achieving it, a new type of water wheel attached nil skimmer was devised, based upon the concept of orifice. The shapes of the water wheel, blades and oil storing tank are found to be very important factors on the oil skimming performance through systematic experimental analysis. Real oil recovery test was also carried out in square tank using the oil skimmer with their optimal shapes. Quite satisfactory result are obtained from the test which showed 99% and 98% recovery rates for light oil and heavy oil in still water condition, respectively.

• 한국해양환경ㆍ에너지학회지
• /
• 제2권2호
• /
• pp.95-102
• /
• 1999

Various types of oil response equipments and oil recovery vessels are being developed in Korea from the 1990s to respond nil spill accidents. It should be considered prior to the selection of the oil skimmers to make the oil recovery system more efficient at early stage of oil spill accidents. Rotating baldes of vortex skimmer beneath the water surface concentrate oil and draw it into the weir, where it flows to a collection sump. In this study a recently developed Vortex-Disc skimmer(model : VDS-50) is introduced and the performance test results for the skimmer are discussed.

• 청정기술
• /
• 제10권2호
• /
• pp.89-100
• /
• 2004

도장부스 수조 내에 부유되는 도장 슬러지의 효율적인 분리를 위한 수조 형상 및 skimmer 설치에 대한 설계를 최적화하였다. VOF 모델을 사용하여 수조 내 도장 슬러지-물-공기 혼합물의 유동형태에 대한 해석을 수행하였고, 해석된 결과를 바탕으로, 수조 내 물로부터 효과적인 슬러지 분리를 위한 도장 부스 수조 내 흡입관, 격판 및 슬러지 유입구의 설치에 대한 최적 설계 기준을 제시하였다. 더 나아가, skimmer 가 수조 내 물에 잠기는 설치조건에 대한 최적화를 통하여 슬러지 흡입 시 공기 혼입 및 압력손실을 최소화 하였다.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1702-1714
• /
• 1998

Removal of spilled oil over the sea and the river has become one of the urgent problems in these days. Removing oil using mechanical devices was recommended because chemical dispersion could cause the secondary contamination in the environment. In the present study a series of experiments were carried out to study the effect of operating conditions, especially, the angle between the belt and the fluid surface on the rate of recovery for the spilled oil using a belt skimmer. Three different types of operation, namely, upward pickup, downward pickup and up-and-downward pickup situations have been investigated for various contact angles, belt speeds and oil thicknesses to find the effects on the recovery rate. The highest rate of oil recovery was found in the case of a contact angle of $45^{\circ}$ and downward pickup. Furthermore, an optimal belt speed was found to reach the saturated recovery rate for a given oil thickness.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.555-558
• /
• 2008

For trying to frontal attack of new solution by fusion of technical tasks and conditions with it's solving methods of the essential tasks of marine resource development and environmental conservation in addition with elements of electronic high-technologies, the skimmer robot was proposed by using of oil spill disaster prevention and its disposal system with sequentially circular collection type of magnetic oil spill adsorbent powder and fabrics on the electronic barge robot for the scheme of sustainable development of environment-friendly technology. It was verified from the experiment of electronic barge robot demonstrator that the skimmer system of magnetic oil spill adsorbent powder and fabrics was very effective and useful technique to collect oil spill samples. At this point, the barge-based electronic remote control was very useful system operating easily on the marine fields to skim oil spill with dangerous toxic substances of crude oil and very harmful to human. Therefore, fusion technology proposed in this study combined with electronic and marine technology is the novel contributable technology for developing marine environmental conservation and environment-friendly disaster prevention, and also its management techniques.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.132-143
• /
• 1997

Removal of spilled oil over the sea and the river has become one of the urgent problem in these days. Removing oil using mechanical devices are recommended because chemical dispersion can cause the secondary contamination in the environment. In the present study a series of experiments were carried out to study the effect of working conditions of a belt type skimmer on the rate of recovery for the spilled oil. The oil chosen for the present experiment was diesel oil. Three different situations, namely, upward, downward, up-and-downward pickup have been investigated for various contact angles, belt speeds and oil thicknesses. The results show that the rate of oil recovery for the case of downward pickup with a contact angle of 45.deg. shows the highest among all the conditions. For the removal of spilled diesel oil the optimal belt speed can be found as the critical value to reach the saturated pickup rate for a given oil thickness. The recovery rate of bunker C oil shows 4-6 times higher than that for diesel oil. And the optimal belt speed for bunker C oil can be found less than that for diesel oil for the same slick thickness.

• 대한기계학회논문집B
• /
• 제21권5호
• /
• pp.679-690
• /
• 1997

Oil spill over the sea and the river become a serious problem in these days. Two different approaches are used to clean up the spilled oil by means of chemical dispersion and mechanical devices. If it is possible, removing spilled oil using mechanical devices are highly desirable in order not to worry about the secondary contamination from chemical treatment. One of the major unsolved problems using mechanical devices has been the recovery of highly viscous oil spill. So, the systematic experimental data for treating very viscous oil are still wanting. In the present study a series of experiments were carried out to study the effect of the rotational direction of the belt skimmer on the rate of oil recovery using Bunker C oil. Three different situations, namely, upward, downward and up-and-downward pickup rate have been investigated for variable belt speed. The results showed that the rate of oil recovery for downward pickup was much higher than that for upward pickup. The major mechanism to recover the oil using a belt skimmer has been confirmed that oil sticks to the belt surface while moving to the water rather than moving upward. For the removal of spilled oil the optimal belt speed under the present experimental conditions was found to be about 200 ~ 270 mm/s just before the starvation started. The present experimental results would provide the basis for understanding the performance characteristics and physics of various types of skimmers.

• 해양환경안전학회지
• /
• 제3권2호
• /
• pp.85-92
• /
• 1997

To determine an operational condition of an adhesion-type oil skimmer, it is important to estimate the withdrawal rate for a given driving velocity of the skimmer and material properties of the oil. As a theoretical model for this problem the formation of an oil film on a vertically driven flat plate is investigated. The previous steady-state analysis made in the field of coating industry are reviewed. These studies have been made under the assumptions of small Reynolds and capillary number, which is adequate for coating process but not for oil skimming. An alternative analysis based on the linear stability theory is made. Comparisons with the experimental results reveal that the stability analysis gives a correct estimation of the withdrawal rate for high capillary number at which the previous theory losses its validity.