• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.1095-1096
• /
• 2008

By adding height compensation to the usual 3 points skew adjustment device, an improved functional skew adjustment device is implemented in this paper. The proposed skew adjustment device is for traverse which will be adapted to BD and HD player system requiring more accuracy. and It can adjust not only R/T skew but also height. The system is composed of personal computer, control box, kinematic mechanism device and bar-code reader device. Application programs are implemented by visual basic.

• 한국전산구조공학회논문집
• /
• 제19권2호
• /
• pp.203-212
• /
• 2006

합성형은 비합성형에 비해 역학적 측면에서 큰 장점을 지닌 것이 사실이지만 사각이 심한 사교들의 경우 합성형은 매우 큰 상판응력을 유발할 수 있기 때문에 종종 이들 사교들에 대한 비합성형 설계가 검토되어지곤 한다. 하지만 이러한 비합성형은 상판과 주형 경계면에서의 미끄러짐(slip)과 같은 구조적인 문제점을 지니고 있어 현장에 적용하기에는 다소 어려움이 있다. 본 연구에서는 사교들의 전반적인 거동에 영향을 미치는 상판과 주형간의 두 가지 상호작용(합성작용과 비합성작용) 효과를 분석하여 사각이 심한 사교들에 대한 합성형의 적용 타당성을 조사하였다. 주형간격, 사각, 상판 종횡비를 매개변수로 총 27개의 단순지지된 사교들에 대한 일련의 연구를 수행하였다. 이전 연구에서 제안된 바 있는 받침들간의 강성조정 개념을 이용하여 합성형 사교의 거동을 개선시킬 수 있는 가능성도 함께 검토하였다. 해석결과로부터 비합성 사교들보다 합성형 사교들에서 훨씬 바람직한 거동이 나타나며 받침들간의 강성조정 방법은 보다 합리적이며 경제적인 합성형 사교 및 하부구조의 설계를 가능하게 해준다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.487-495
• /
• 2003

Bearings at the obtuse corner are subjected to much larger vertical reactions than other bearings because of the geometric shape of skew bridges. The current relevant specifications require that additional bars should be disposed at the bottom of concrete deck slabs to deal with the large vertical reaction on bearings at the obtuse corner. In this study, new methods of reducing the magnitude of the vertical reaction on bearings at the obtuse corner by the stiffness adjustment of bearings were proposed. The basic concept of proposed methods was to redistribute support reactions by reducing the vertical stiffness of bearings at the obtuse corner showing a relatively large vertical reaction. For 45 simply supported skew bridges designed according to the current relevant specifications, the redistribution effect of vertical reactions by the stiffness adjustment of bearings was investigated. Parameters such as skew angle, girder spacing, and deck aspect ratio that affect the distribution of support reactions were considered. The results of the analyses show that the magnitude of the vertical reaction on bearings at the obtuse corner can be reduced to the levels of straight bridges by replacing the existing bearings at the obtuse corner with new ones having the value of 1/10 or 1/20 of the vertical stiffness of the existing bearings. The reduction effect of the vertical reaction on bearings at the obtuse corner increases as the girder spacing decreases and it is more pronounced when the deck aspect ratio is 2.0.

• ETRI Journal
• /
• 제32권6호
• /
• pp.854-862
• /
• 2010

One-way delay variation (OWDV) has become increasingly of interest to researchers as a way to evaluate network state and service quality, especially for real-time and streaming services such as voice-over-Internet-protocol (VoIP) and video. Many schemes for OWDV measurement require clock synchronization through the global-positioning system (GPS) or network time protocol. In clock-synchronized approaches, the accuracy of OWDV measurement depends on the accuracy of the clock synchronization. GPS provides highly accurate clock synchronization. However, the deployment of GPS on legacy network equipment might be slow and costly. This paper proposes a method for measuring OWDV that dispenses with clock synchronization. The clock synchronization problem is mainly caused by clock skew. The proposed approach is based on the measurement of inter-packet delay and accumulated OWDV. This paper shows the performance of the proposed scheme via simulations and through experiments in a VoIP network. The presented simulation and measurement results indicate that clock skew can be efficiently measured and removed and that OWDV can be measured without requiring clock synchronization.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.1031-1032
• /
• 2007

Gap servo NF (Near Field) system is one of technologies to reduce beam spot size by increasing NA (Numerical Aperture) of lens. To achieve higher NA, SIL (Solid Immersion Lens) is used. In the case of using a blue LD (405 nm) as the light source the gap distance should be controlled under 100 nm with much tighter margin. Because of very small gap distance between SIL bottom and the surface of media, relative tilt tolerance is limited. In this paper, we presented 2-axis tilt mechanism for skew adjustment within small tilt margin.

• 한국건설관리학회논문집
• /
• 제6권5호
• /
• pp.69-77
• /
• 2005

Change is inevitable and is a reality of construction projects. Most construction contracts include change clauses and allowing contractors an equitable adjustment to the contract price and duration caused by change. However, the actions of a contractor can cause a loss of productivity and furthermore can result in disruption of the whole project because of a cumulative or ripple effect. Because of its complicated nature, it becomes a complex issue to determine the cumulative impact (ripple effect) caused by single or multiple change orders. Furthermore, owners and contractors do not always agree on the adjusted contract price for the cumulative Impact of the changes. A number of studies have attempted to quantify the impact of change orders on project costs and schedule. Many of these attempted to develop regression models to quantify the loss. However, regression analysis has shortcomings in dealing with many qualitative or noisy input data. This study develops ANN models to classify and quantify the labor productivity losses that are caused by the cumulative impact of change orders. The results skew that ANN models give significantly improved performance compared to traditional statistical models.

• 한국정보통신학회논문지
• /
• 제14권8호
• /
• pp.1907-1917
• /
• 2010

과거 수 십 년 동안의 축적되어진 수 십 만 장의 조위관측기록지는 해양 과학 연구자에게 매우 중요한 데이터이다. 그러나 방대한 량의 조위관측기록지에서 연구자가 원하는 조위관측 기록을 찾기는 매우 어렵다. 이러한 문제를 해결하기 위하여 많은 해양 과학 연구자들은 조위관측기록지에서 그래프를 추출하여 검색이 용이한 디지털 데이터로 변경하여 관리하는 시스템 개발을 요구하고 있다. 이러한 요구에 따라 본 논문에서는 조위관측기록지에서 그래프를 추출하여 디지털 데이터로 변경하는 조위관측기록지 디지타이징 시스템을 구현하였다. 본 논문에서 구현된 조위관측기록지 디지타이징 시스템은 스캔된 이미지의 기울기 보정 및 이미지 규격화를 자동으로 수행하는 전처리 시스템과 이미지에서 그래프 영역을 추출하고 세선화 작업을 수행하는 디지타이징시스템, 데이터의 신뢰성을 검토하는 후처리 시스템으로 구성된다. 조위관측기록지 디지타이징 시스템은 수작업에 대한 의존도를 줄임으로서 작업 공정의 효율성을 높여 조위관측기록지 디지타이징 작업에 따른 비용을 최소화하였다.