• The korean journal of orthodontics
• /
• v.48 no.6
• /
• pp.357-366
• /
• 2018

Objective: The purpose of this study was to analyze the transverse dental compensation in reference to the maxillary and mandibular basal bones using cone-beam computed tomography (CBCT) and evaluate the correlations between transverse dental compensation and skeletal asymmetry variables in patients with skeletal Class III malocclusion and facial asymmetry. Methods: Thirty patients with skeletal Class I (control group; 15 men, 15 women) and 30 patients with skeletal Class III with menton deviation (asymmetry group; 16 men, 14 women) were included. Skeletal and dental measurements were acquired from reconstructed CBCT images using OnDemand3D 1.0 software. All measurements were compared between groups and between the deviated and nondeviated sides of the asymmetry group. Correlation coefficients for the association between skeletal and dental measurements were calculated. Results: Differences in the ramus inclination (p < 0.001), maxillary canine and first molar inclinations (p < 0.001), and distances from the canine and first molar cusp tips to the midmaxillary or midmandibular planes (p < 0.01) between the right and left sides were significantly greater in the asymmetry group than in the control group. In the asymmetry group, the ramus inclination difference (p < 0.05) and mandibular canting (p < 0.05) were correlated with the amount of menton deviation. In addition, dental measurements were positively correlated with the amount of menton deviation (p < 0.05). Conclusions: Transverse dental compensation was correlated with the maxillary and mandibular asymmetry patterns. These results would be helpful in understanding the pattern of transverse dental compensation and planning surgical procedure for patients with skeletal Class III malocclusion and facial asymmetry.

• The korean journal of orthodontics
• /
• v.53 no.2
• /
• pp.67-76
• /
• 2023

Objective: Morphometric and morphological evaluation of the mandibular condyle in adults and to identify its correlation with skeletal malocclusion patterns. Methods: Cone-beam computed tomography scans of 135 adult patients were used in this study and classified into groups according to four criteria: (1) sex (male and female); (2) sagittal skeletal discrepancy (Class I, Class II, and Class III); (3) vertical skeletal discrepancy (hyperdivergent, normodivergent, and hypodivergent); and age (group 1 ≤ 20 years, 21 ≤ group 2 < 30, and group 3 ≥ 30 years). The morphometrical variables were mandibular condyle height and width, and the morphological variable was the mandibular condyle shape in coronal and sagittal sections. Three-dimensional standard tessellation language files were created using itk-snap (open-source software), and measurements were performed using Meshmixer (open-source software). Results: The mandibular condyle height was significantly greater (p < 0.05) in patients with class III malocclusion than in those with class I or II malocclusion; the mandibular condyle width was not significantly different among different sexes, age groups, and sagittal and vertical malocclusions. There were no statistical associations between various mandibular condyle shapes and the sexes, age groups, and skeletal malocclusions. Conclusions: The condylar height was greatest in patients with class III malocclusion. The condylar height and width were greater among males than in females. The mandibular condyle shapes observed in sagittal and coronal sections did not affect the skeletal malocclusion patterns.

• The korean journal of orthodontics
• /
• v.9 no.1
• /
• pp.85-98
• /
• 1979

This investigation was designed to compare the craniofacial and dental morphology of class III malocclusion with that of normal occlusin in children, and to determine the incidence of various class III craniofacial skeletal patterns. The material selected for this study consisted in standard lateral cephalograms of eighty two Korean children, forty one boys and forty one girls, aged 10 through 12 years, having class III malocclusion, and forty two Korean children, twenty boys and twenty two girls, with normal occlusion in the same age. Using the tracings of the standard lateral cephalograms, various angular and linear measurements were recorded, tabulated and statistically analyzed, and then the class III craniofacial skeletal morphology was divided into various patterns by the degree of SNA and SNB, which respectively were below, within or beyond the normal range of those of normal occlusion. The following characteristics of the craniofacial and dental morphology of class III malocclusion were observed. 1. The cranial base length of class III malocclusion was smaller than that of normal occlusion, and the small saddle angle was a characteristic figure of class III malocclucion. 2. Maxillary length of class III malocclusion was smaller than that of normal occlusion, and point A was retropositioned relative to cranial base but not PNS in class III malocclusion. Maxillary base inclination was not significantly different between the two, but occlusal plane to palatal plane was small in class III malocciusion. 3. The mandibular body length shown no difference between the two, but the mandibular body positioned anteriorly relative to cranial base in class III malocclusion. Ramus height, gonial angle, and mandibular effective length were large in class III malocclusion. Mandibular plane angle and joint angle had no difference between the two, and occlusal plane to mandibular plane angle was large in class III malocclusion. 4. Maxillary incisor inclination was not significantly different between class III malocclusion and normal occlusion, but mandibular incisors positioned and inclined lingually and consequently interincisal angle was large in class III malocclusion. 5. Class III malocclusion was divided into six categories of craniofacial skeletal pattern. The most common class III pattern was found to be one in which the maxilla was within the normal range of prognathism while the mandible extended beyond this range. The pattern in which the maxilla was below the normal range of prognathism while the mandible was within this range was approximately one fifth of the class III sample.

• The korean journal of orthodontics
• /
• v.33 no.1 s.96
• /
• pp.41-49
• /
• 2003

This study examined the relations between degree of posterior dental compensation and skeletal discrepancy in Class III malocclusion. The pretreatment lateral cephalogras and dental casts of 87 skeletal Class III adults were selected to provide a random sampling of skeletal Class III malocclusion. Skeletal discrepancy was described with ANB angle, Wits appraisal, SN-Mn plane angle, FMA and ratios of basal arch width. Degree of posterior dental compensation was described with maxillary intermolar angle, mandibular interolar angle and sum of intermoloar angle. The relationships between skeletal discrepancy and degree of posterior dental compensation were analyzed with simple correlation analysis, stepwise multiple regression analysis. The results were as follows 1. A strong association was found between the variation in the anteroposterior measure, ANB angle and the variation of posterior dental compensation measures, sum of intermolar angle and mandibular intermolar angle in skeletal Class III malocclusion. 2. There was no statistically significant relationship between the variation in the vertical measures and the variation of posterior dental compensation measures in skeletal Class III malocclusion. 3. There was no statistically significant relationship between the variation in the anteroposterior and vortical measures and degree of basal arch width discrepancy.

• The korean journal of orthodontics
• /
• v.48 no.1
• /
• pp.63-70
• /
• 2018

Objective: The aim of this study is to quantitatively evaluate the stability of the skeletal and dental widths using cone-beam computed tomography (CBCT) after segmental Le Fort I osteotomy in adult patients with skeletal Class III malocclusion requiring maxillary expansion. Methods: In total, 25 and 36 patients with skeletal Class III malocclusion underwent Le Fort I osteotomy (control group) and segmental Le Fort I osteotomy (experimental group), respectively. Coronal CBCT images were used to measure the dental and skeletal widths before (T1) and after (T2) surgery and at the end of treatment (T3). The correlation between the extent of surgery and the amount of relapse in the experimental group was also determined. Results: In the control group, the dental width exhibited a significant decrease of $0.70{\pm}1.28mm$ between T3 and T2. In the experimental group, dental and skeletal expansion of $1.83{\pm}1.66$ and $2.55{\pm}1.94mm$, respectively, was observed between T2 and T1. The mean changes in the dental and skeletal widths between T3 and T2 were $-1.41{\pm}1.98$ and $-0.67{\pm}0.72mm$, respectively. There was a weak correlation between the amount of skeletal expansion during segmental Le Fort I osteotomy and the amount of postoperative skeletal relapse in the experimental group. Conclusions: Maxillary expansion via segmental Le Fort I osteotomy showed good stability, with a skeletal relapse rate of 26.3% over approximately 12 months. Our results suggest that a greater amount of expansion requires greater efforts for the prevention of relapse.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.736-745
• /
• 1996

The conventional treatment of skeletal Class III malocclusion has been focused on application of orthopedic force primarily to the mandible. However, In Class III malocclusion with retrograde position or underdevelopment of Maxilla, this approach is not suitable treatment. These patients need an application of orthopedic forces via face-mask to the Maxilla to stimulate its growth and to change the direction of growth. In skeletal Class III patients who were treated by Face-Mask, the following results were obtained. 1. Forward growth of Maxilla was enhanced. 2. Labioversion of upper incisors and linguoversion of lower incisors were observed. 3. Mandible was rotated to clockwise direction and remodeling of B point was observed. 4. Anterior crossbite was corrected by combining of the above results.

• The korean journal of orthodontics
• /
• v.50 no.5
• /
• pp.304-313
• /
• 2020

Objective: The aim of this study was to evaluate the stability of bimaxillary surgery involving bilateral intraoral vertical ramus osteotomy performed with or without presurgical miniscrew-assisted rapid palatal expansion (MARPE) in adult patients with skeletal Class III malocclusion. Methods: A total of 40 adult patients with skeletal Class III malocclusion were retrospectively divided into two groups (n = 20 each) according to the use of MARPE for the correction of transverse maxillomandibular discrepancy during presurgical orthodontic treatment. Serial lateral cephalograms and dental casts were analyzed until 6 months after surgery. Results: Before presurgical orthodontic treatment, there was no significant differences in terms of sex and age between groups. However, the difference of approximately 3.1 mm in the maxillomandibular intermolar width was statistically significant (p < 0.001). Two days after surgery, the mandible had moved backward and upward without any significant intergroup difference. Six months after surgery, the maxillary intercanine (2.7 ± 2.1 mm), interpremolar (3.6 ± 2.4 mm), and intermolar (2.0 ± 1.3 mm) arch widths were significantly increased (p < 0.001) relative to the values before presurgical orthodontic treatment in the MARPE group; these widths were maintained or decreased in the control group. However, there was no significant difference in surgical changes and the postsurgical stability between the two groups. No significant correlations existed between the amount of maxillary expansion and postsurgical mandibular movement. Conclusions: MARPE is useful for stable and nonsurgical expansion of the maxilla in adult patients with skeletal Class III malocclusion who are scheduled for bimaxillary surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.5
• /
• pp.397-403
• /
• 2001

Purpose: The purpose of this study was to evaluate the postoperative stability of LeFort I osteotomy in two-jaw surgery of skeletal class III malocclusion and to help the establishment of treatment planning in patients with a skeletal class III malocclusion in the future. Materials and Methods: The lateral cephalograms of 14 patients who had been underwent two-jaw surgery via one-piece LeFort I osteotomy were traced and the landmarks were identified. Repeated tracings and construction of reference planes were done. Comparisons were made from the immediate postoperative to late postoperative results of each landmarks on the horizontal and vertical directions. Conclusions: 1. The horizontal changes of landmark ANS, point A, PNS and Mx6Rt between immediate postoperative to late postoperative data were statistically insignificant(p>0.05). 2. The vertical changes of landmark ANS, point A, PNS, Mx6Cr and Mx6Rt between immediate postoperative to late postoperative data were statistically insignificant(p>0.05). 3. The horizontal change of landmark Mx6Cr between immediate postoperative to late postoperative data was statistically significant(p<0.05). 4. Results showed that it was stable that one-piece LeFort I osteotomy in two-jaw surgery of skeletal class III malocclusion.

• The korean journal of orthodontics
• /
• v.38 no.5
• /
• pp.358-370
• /
• 2008

Objective: The purpose of this study was to investigate the horizontal skeletal pattern and dental arch differences between Class III malocclusion patients and normal occlusion patients. Methods: Twenty skeletal Class III malocclusion patients and ten normal occlusion patients were selected and 3D facial CT were taken to analyze the horizontal skeletal differences between the two groups. Results: In the horizontal comparison of the maxilla, skeletal width and perimeter were significantly smaller in skeletal Class III patients on ANS and A point reference planes. The difference between maxillary width of ANS and A point reference planes showed that there was greater constriction of the first and second premolar in skeletal Class III patients. In the horizontal comparison of the mandible, the widths of the canine and premolar area were significantly larger in skeletal Class III patients on B point reference plane. The differences between width of the upper and lower jaws (comparison of A and B reference planes) were significantly large in the canine and premolar area. Conclusions: From this study, the characteristics of Class III malocclusion patients were shown through horizontal constriction of the maxilla. But to make clear further detailed characteristics of Class III malocclusion patients, additional studies are necessary.

• The korean journal of orthodontics
• /
• v.47 no.4
• /
• pp.256-267
• /
• 2017

Objective: To evaluate transverse skeletal and dental changes, including those in the buccolingual dental axis, between patients with skeletal Class III malocclusion and facial asymmetry after bilateral intraoral vertical ramus osteotomy with and without presurgical orthodontic treatment. Methods: This retrospective study included 29 patients with skeletal Class III malocclusion and facial asymmetry including menton deviation > 4 mm from the midsagittal plane. To evaluate changes in transverse skeletal and dental variables (i.e., buccolingual inclination of the upper and lower canines and first molars), the data for 16 patients who underwent conventional orthognathic surgery (CS) were compared with those for 13 patients who underwent preorthodontic orthognathic surgery (POGS), using three-dimensional computed tomography at initial examination, 1 month before surgery, and at 7 days and 1 year after surgery. Results: The 1-year postsurgical examination revealed no significant changes in the postoperative transverse dental axis in the CS group. In the POGS group, the upper first molar inclined lingually on both sides (deviated side, $-1.8^{\circ}{\pm}2.8^{\circ}$, p = 0.044; nondeviated side, $-3.7^{\circ}{\pm}3.3^{\circ}$, p = 0.001) and the lower canine inclined lingually on the nondeviated side ($4.0^{\circ}{\pm}5.4^{\circ}$, p = 0.022) during postsurgical orthodontic treatment. There were no significant differences in the skeletal and dental variables between the two groups at 1 year after surgery. Conclusions: POGS may be a clinically acceptable alternative to CS as a treatment to achieve stable transverse axes of the dentition in both arches in patients with skeletal Class III malocclusion and facial asymmetry.