• The korean journal of orthodontics
• /
• v.9 no.1
• /
• pp.85-98
• /
• 1979

This investigation was designed to compare the craniofacial and dental morphology of class III malocclusion with that of normal occlusin in children, and to determine the incidence of various class III craniofacial skeletal patterns. The material selected for this study consisted in standard lateral cephalograms of eighty two Korean children, forty one boys and forty one girls, aged 10 through 12 years, having class III malocclusion, and forty two Korean children, twenty boys and twenty two girls, with normal occlusion in the same age. Using the tracings of the standard lateral cephalograms, various angular and linear measurements were recorded, tabulated and statistically analyzed, and then the class III craniofacial skeletal morphology was divided into various patterns by the degree of SNA and SNB, which respectively were below, within or beyond the normal range of those of normal occlusion. The following characteristics of the craniofacial and dental morphology of class III malocclusion were observed. 1. The cranial base length of class III malocclusion was smaller than that of normal occlusion, and the small saddle angle was a characteristic figure of class III malocclucion. 2. Maxillary length of class III malocclusion was smaller than that of normal occlusion, and point A was retropositioned relative to cranial base but not PNS in class III malocclusion. Maxillary base inclination was not significantly different between the two, but occlusal plane to palatal plane was small in class III malocciusion. 3. The mandibular body length shown no difference between the two, but the mandibular body positioned anteriorly relative to cranial base in class III malocclusion. Ramus height, gonial angle, and mandibular effective length were large in class III malocclusion. Mandibular plane angle and joint angle had no difference between the two, and occlusal plane to mandibular plane angle was large in class III malocclusion. 4. Maxillary incisor inclination was not significantly different between class III malocclusion and normal occlusion, but mandibular incisors positioned and inclined lingually and consequently interincisal angle was large in class III malocclusion. 5. Class III malocclusion was divided into six categories of craniofacial skeletal pattern. The most common class III pattern was found to be one in which the maxilla was within the normal range of prognathism while the mandible extended beyond this range. The pattern in which the maxilla was below the normal range of prognathism while the mandible was within this range was approximately one fifth of the class III sample.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.41 no.3
• /
• pp.225-232
• /
• 2014

The purpose of this study was to compare skeletal maturity index and dental developmental stages based on skeletal malocclusion. A total of 192 patients (89 male and 103 female) between 6 to 14 years old were selected for this study and underwent cephalograms, panorama radiographs, and hand-wrist radiographs. Any syndromic cases were excluded. Selected clinical parameters were dichotomised for statistical analysis. Chi-square, logistic regression analysis, and independent t-tests were used for the statistical evaluation. Canine, first molar, and second molar calcification were significantly associated with skeletal maturity in the logistic regression model (p < 0.05). In addition, patients who had higher skeletal maturity index were 11.43 times more likely to be female than those who had lower skeletal maturity index (p < 0.001). The patients with skeletal class II malocclusion displayed significantly higher dental developmental stage in canines, first premolars, first molars, and second molars than the patients with class III malocclusion (p < 0.05). The dental developmental stage of the patients was significantly associated with skeletal maturity. In addition, there was a significant difference between class II and class III malocclusion with some types of tooth calcification.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.2
• /
• pp.235-242
• /
• 2008

The purpose of this study was to investigate the relationship of the skeletal maturity of hand-wrist and the development of mandibular third molar in subjects with class I and class III malocclusion. The subjects used in this study were 304 children(149 boys, 155 girls) with class I malocclusions and 308 children( 153 boys, 155 girls) with class III malocclusions, ranged from 8 to 15 years of age. Hand-wrist radiographs and panoramic radiographs were used to evaluate the stage of skeletal maturity and teeth development. Fishman's method for the skeletal maturity stages of the hand-wrist and new six-developmental-stage method for the calcification stages of mandibular third molars were analyzed. The results were as follows : 1. In subjects with class I and class III malocclusion, skeletal maturity of the hand-wrist occured earlier in females than in males(p<0.05), while the calcification stages of mandibular third molars were no significant gender differences. 2. There were no significant differences between the groups, when comparing the skeletal maturity stages of the hand-wrist and the calcification stages of mandibular third molars between subjects with the class I and the class III malocclusion. 3. The correlation coefficients between the calcification stages of mandibular third molars and the skeletal maturity stages of the hand-wrist in subjects with class I and class III malocclusion showed a high interrelationship(p<0.01). 4. The correlation coefficients between the calcification stages of mandibular third molars and chronological age in subjects with class I and class III malocclusion showed a high interrelationship (p<0.01). As a result, there were no significant differences between class I and class III malocclusion group for skeletal maturity of the hand-wrist and third molar development.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.28 no.1
• /
• pp.27-34
• /
• 2006

After orthognathic surgery in skeletal class III patients, the hyoid bone position and the upper airway dimension could be changed due to mandibular setback. There has been many studies about airway dimension of the patients with skeletal class II malocclusion or obstructive sleep apnea. but not with skeletal class III. The purpose of this study was to examine the change of position of the hyoid bone and the consequent change of airway space as the result of retrusion of mandible after orthognathic surgery in skeletal Cl III malocclusion patients. It is also to apply this results in predicting, diagnosing and treating the subsequent obstructive sleep apnea. Forty patients who were diagnosed as skeletal Cl III maloccusion, received orthoganthic surgery of both jaws including mandibular setback, and were followed up post-operatively for more than 6 months were selected. There were 10 male patients 30 female patients. The preoperative and postoperative lateral cephalograms were traced and the distances and angles were measured. The nasopharyngeal space increased postoperatively while the oropharyngeal space decreased. Except for the change of oroparyngeal space, the changes in male patients were greater than female patients. The hyoid bone moved in the posterior-inferior direction, and the change was greater in males than in females. If the postoperative mandibular setback is great, then a significant decrease of airway space and posterior and inferior movement of the hyoid bone were observed. This can result in symptoms related to obstructive sleep apnea. This result should be considered in the diagnosis and treatment planning of orthognathic surgery patients.

• The korean journal of orthodontics
• /
• v.47 no.2
• /
• pp.118-129
• /
• 2017

Objective: To evaluate the effects of facemask therapy, which was anchored from the zygomatic buttresses of the maxilla by using two miniplates, in skeletal Class III patients with maxillary deficiency. Methods: Eighteen skeletal Class III patients (10 girls and 8 boys; mean age, $11.4{\pm}1.28$ years) with maxillary deficiency were treated using miniplate-anchored facemasks, and their outcomes were compared with those of a Class III control group (9 girls and 9 boys; mean age, $10.6{\pm}1.12$ years). Two I-shaped miniplates were placed on the right and left zygomatic buttresses of the maxilla, and a facemask was applied with a 400 g force per side. Intragroup comparisons were made using the Wilcoxon test, and intergroup comparisons were made using the Mann-Whitney U-test (p < 0.05). Results: In the treatment group, the maxilla moved 3.3 mm forward, the mandible showed posterior rotation by $1.5^{\circ}$, and the lower incisors were retroclined after treatment. These results were significantly different from those in the control group (p < 0.05). No significant anterior rotation of the palatal plane was observed after treatment. Moreover, changes in the sagittal positions of the maxillary incisors and molars were similar between the treatment and control groups. Conclusions: Skeletally anchored facemask therapy is an effective method for correcting Class III malocclusions, which also minimizes the undesired dental side effects of conventional methods in the maxilla.

• The korean journal of orthodontics
• /
• v.50 no.5
• /
• pp.304-313
• /
• 2020

Objective: The aim of this study was to evaluate the stability of bimaxillary surgery involving bilateral intraoral vertical ramus osteotomy performed with or without presurgical miniscrew-assisted rapid palatal expansion (MARPE) in adult patients with skeletal Class III malocclusion. Methods: A total of 40 adult patients with skeletal Class III malocclusion were retrospectively divided into two groups (n = 20 each) according to the use of MARPE for the correction of transverse maxillomandibular discrepancy during presurgical orthodontic treatment. Serial lateral cephalograms and dental casts were analyzed until 6 months after surgery. Results: Before presurgical orthodontic treatment, there was no significant differences in terms of sex and age between groups. However, the difference of approximately 3.1 mm in the maxillomandibular intermolar width was statistically significant (p < 0.001). Two days after surgery, the mandible had moved backward and upward without any significant intergroup difference. Six months after surgery, the maxillary intercanine (2.7 ± 2.1 mm), interpremolar (3.6 ± 2.4 mm), and intermolar (2.0 ± 1.3 mm) arch widths were significantly increased (p < 0.001) relative to the values before presurgical orthodontic treatment in the MARPE group; these widths were maintained or decreased in the control group. However, there was no significant difference in surgical changes and the postsurgical stability between the two groups. No significant correlations existed between the amount of maxillary expansion and postsurgical mandibular movement. Conclusions: MARPE is useful for stable and nonsurgical expansion of the maxilla in adult patients with skeletal Class III malocclusion who are scheduled for bimaxillary surgery.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.33 no.3
• /
• pp.204-210
• /
• 2007

This study was intended to compare the cranial base morphology between the mandibular prognathism and maxillary retrognathism in skeletal class III patients. The subject of the present study was composed of 88 patients divided into two groups; Group 1 (Skeletal Class III with mandibular prognathism. SNA within normal range, SNB over normal range, n=54) and Group 2(Skeletal Class III with maxillary retrognathism. SNA below normal range, SNB within normal range, n=34). Lateral cephalogram were taken immediate before surgery and 18 landmarks were used to analyze the characteristics of cranial base and maxillomandibular skeleton. The result revealed that cranial base angle is significantly smaller in Group 1 than Group 2, which implies the influence of the cranial base angulation on the mandibular position. However the posterior cranial base length did not influence the mandibular horizontal position and anterior cranial base length did not influence the maxillary horizontal position. As the anterior cranial base length was closely related with ramal height, it is recommendable to investigate the regulatory mechanism of chondrogenesis of cranial base and condyle cartilage in the future research.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.27 no.5
• /
• pp.397-403
• /
• 2001

Purpose: The purpose of this study was to evaluate the postoperative stability of LeFort I osteotomy in two-jaw surgery of skeletal class III malocclusion and to help the establishment of treatment planning in patients with a skeletal class III malocclusion in the future. Materials and Methods: The lateral cephalograms of 14 patients who had been underwent two-jaw surgery via one-piece LeFort I osteotomy were traced and the landmarks were identified. Repeated tracings and construction of reference planes were done. Comparisons were made from the immediate postoperative to late postoperative results of each landmarks on the horizontal and vertical directions. Conclusions: 1. The horizontal changes of landmark ANS, point A, PNS and Mx6Rt between immediate postoperative to late postoperative data were statistically insignificant(p>0.05). 2. The vertical changes of landmark ANS, point A, PNS, Mx6Cr and Mx6Rt between immediate postoperative to late postoperative data were statistically insignificant(p>0.05). 3. The horizontal change of landmark Mx6Cr between immediate postoperative to late postoperative data was statistically significant(p<0.05). 4. Results showed that it was stable that one-piece LeFort I osteotomy in two-jaw surgery of skeletal class III malocclusion.

• The korean journal of orthodontics
• /
• v.45 no.4
• /
• pp.153-163
• /
• 2015

Objective: The purpose of this study was to assess rotational patterns of dentofacial structures according to different vertical skeletal patterns by cone-beam computed tomography (CBCT) and analyze their influence on menton deviation in skeletal Class III deformity with mandibular asymmetry. Methods: The control group consisted of 30 young adults (15 men, 15 women) without any severe skeletal deformity. The asymmetry group included 55 adults (28 men, 27 women) with skeletal Class III deformity and at least 3-mm menton deviation from the midsagittal plane; it was divided into the hyperdivergent and hypodivergent subgroups using a mandibular plane angle cutoff of $35^{\circ}$. Fourteen rotational variables of the dental arches and mandible were measured and compared among the groups. Correlations between menton deviation and the other variables were evaluated. Results: The asymmetry group showed significantly larger measurements of roll and yaw in the mandible than the control group. The hypodivergent subgroup showed significant differences in maxillary posterior measurements of yaw (p < 0.01) and maxillary anterior shift (p < 0.05) compared with the hyperdivergent subgroup. All the mandibular measurements had significant correlations with menton deviation (p < 0.01). Most measurements of roll were positively correlated with one another (p < 0.01). Measurements of yaw and roll in the posterior regions were also positively correlated (p < 0.05). Conclusions: Menton deviation in skeletal Class III deformity with mandibular asymmetry is influenced by rotation of mandibular posterior dentofacial structures. The rotational patterns vary slightly according to the vertical skeletal pattern.

• The korean journal of orthodontics
• /
• v.47 no.4
• /
• pp.256-267
• /
• 2017

Objective: To evaluate transverse skeletal and dental changes, including those in the buccolingual dental axis, between patients with skeletal Class III malocclusion and facial asymmetry after bilateral intraoral vertical ramus osteotomy with and without presurgical orthodontic treatment. Methods: This retrospective study included 29 patients with skeletal Class III malocclusion and facial asymmetry including menton deviation > 4 mm from the midsagittal plane. To evaluate changes in transverse skeletal and dental variables (i.e., buccolingual inclination of the upper and lower canines and first molars), the data for 16 patients who underwent conventional orthognathic surgery (CS) were compared with those for 13 patients who underwent preorthodontic orthognathic surgery (POGS), using three-dimensional computed tomography at initial examination, 1 month before surgery, and at 7 days and 1 year after surgery. Results: The 1-year postsurgical examination revealed no significant changes in the postoperative transverse dental axis in the CS group. In the POGS group, the upper first molar inclined lingually on both sides (deviated side, $-1.8^{\circ}{\pm}2.8^{\circ}$, p = 0.044; nondeviated side, $-3.7^{\circ}{\pm}3.3^{\circ}$, p = 0.001) and the lower canine inclined lingually on the nondeviated side ($4.0^{\circ}{\pm}5.4^{\circ}$, p = 0.022) during postsurgical orthodontic treatment. There were no significant differences in the skeletal and dental variables between the two groups at 1 year after surgery. Conclusions: POGS may be a clinically acceptable alternative to CS as a treatment to achieve stable transverse axes of the dentition in both arches in patients with skeletal Class III malocclusion and facial asymmetry.