• Journal of the Korean Society for Nondestructive Testing
• /
• v.29 no.2
• /
• pp.104-107
• /
• 2009

It was verified that the effect of the distance between current input point and output point on direct current potential drop(DCPD) in the material with two-dimensional surface notch. If the distance between potential drop measuring points was fixed at a certain distance, the potential drop was decreased with increasing the distance between current input and output points. Hence it is the effect way to increase sensitivity in DCPD that the current input and output points should be located near the potential measuring points. DCPD was a useful method for surface crack sizing because the potential drop was proportional to the length of notch. When the current input and output points are located near the potential measuring points, even small length crack can be measured by DCPD technique.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.2 s.115
• /
• pp.61-71
• /
• 2006

Environment-friendly shock-absorbing (cushioning) materials were made using a vacuum forming method from waste wood collected from local mountains in Korea. The waste wood was pulped by thermomechanical pulping. The TMP cushions showed superior shock-absorbing properties with lower elastic moduli compared to EPS(Expanded Polystyrene) and pulp mold. Even though the TMP cushions made using at different suction times had many free voids in their inner fiber structures, their apparent densities were a little higher than EPS and much lower than pulp mold. The addition of cationic starch improved elastic modulus of the TMP cushions without increasing the apparent density, which was different from surface sizing with starch. The porosity of the TMP cushions was a little greater than EPS and much less than pulp mold. Finally, the TMP cushions have great potential to endure external impacts occurring during goods distribution.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2007.05a
• /
• pp.33-55
• /
• 2007

This article portrays special cellulose fibers, which are designed to be a functional additive and a carrier for papermaking chemicals. The first part of the presentation deals with the micronized $ARBOCEL^{(R)}$ cellulose fibers, which are used as a functional paper/paperboard additive. In particular as a bulk and speed aid. The detailed description of the micronized $ARBOCEL^{(R)}$ fibers, their function and effects on papermaking process and paper products are given. The second part of the study describes the concept of fiber-based papermaking chemicals. A new generation of fiber-based papermaking chemicals were presented for the first time at the PTS Pulp Technology Symposium 2005, and then several articles were published in various magazine in Asia ("Paper Asia"), the US ("Pulp & Paper"). and Europe ("Wochenblatt fuel Papierfabrikation"). The information generated quite an interest in the paper industry. Extensive studies of these papermaking additives have been made recently, new information obtained, and the compounds have gained more recognition in the industry. The company J. Rettenmaier und Soehne developed a group of fiber-based papermaking additives. They include combination of fibers with sizing agents, starch, fluorochemicals, minerals, biocides and some others. This article presents in-depth study of the AKD modified micronized cellulose as an example of the fiber-based papermaking chemicals concept. The material of the present paper is based mostly on the results of the pilot paper machine study at the Paper Research Institute PTS (Heidenau, Germany), and includes case studies from the mills, which used $ARBOCELPLUS^{(R)}-AKD$ compounds. It should be noted that the $ARBOCELPLUS^{(R)}$ compounds were not designed to replace traditional additives in paper industry. They should rather be used in those areas, where application of "normal" chemicals is especially problematic

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.12
• /
• pp.1853-1861
• /
• 2009

Body sizing of has been recognized as an important element affecting the degree of customer satisfaction in the apparel industry. Recent developments in IT technologies have enabled more studies in custom-made apparel systems that comply with the diverse demands from customers in many countries. Diverse methods to obtain personal physical size are being studied. This study estimates the accuracy by developing the system in which the data of length and girth can be calculated through changing a modeling by comparing the data with circular 3-dimensional physical configuration data. This information was computed from the process (such as the conversion to a standardize image) which utilizes the image capture of 2-dimensional three sides (front, side, and rear), contour tracing, and key-node selection and by realizing it in the real world.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.1
• /
• pp.184-195
• /
• 2017

Baseball is a life sport that gives vitality to people. However, currently available leg guards do not have a variety of sizes and it is very difficult to purchase a leg guard that is suitable for the size of a specific consumer. Therefore, this study investigated the size system of a leg guard sold in the market and suggested a grading deviation suitable for the legs of Korean males. The results of the study were as follows. First, most brands were sold only in three size systems as children's, teenagers, and adults. Adult size systems were not subdivided. Second, Korean male legs were classified into Group 1 (large girth and height and lower body muscle) and Group 2 (small girth and height and low underbody muscle). Third, the size system is based on vertical items such as height and mid-thigh circumference. Each group produced 10 sizes. The smallest height or the largest height was also found to be about 4.5 to 5.0cm smaller or larger than the sample size for each group. The total length of the leg guard was about 2.5cm when the height was increased or decreased by one size. It was confirmed that the deviation of the circumference of the mid-thigh should be about 2.0cm larger or smaller than the sample size even if the height is the same. The deviation of the knee circumference and ankle circumference was smaller than the other circumference. In conclusion, the dimension combinations of the leg guard must be set differently to provide a leg guard with high size suitability according to leg type.

• Applied Biological Chemistry
• /
• v.41 no.4
• /
• pp.228-234
• /
• 1998

An adaptive measure of photosynthetic cells to a condition identified with a reduction of cellular energy charge, caused by water deficit-induced impairment of photosynthetic ATP production, was investigated using hydroponically cultured rice seedlings. Water stress treatment of the seedlings resulted in a marked decrease in cellular ATP level, a significant increase in the content of NAD(H) and concurrent decrease in that of NADP(H) in shoots, which accompanied a decrease in the activity of NAD kinase (EC 2.7.1.23) that specifically converts NAD(H) to NADP(H). The decline in the enzyme activity was particularly evident in the $Ca^{2+}/calmodulin-dependent$ kinase, the major form of NAD kinase in plants, whereas the level of active calmodulin remained unchanged during water deficit. The ratio of $NADP^+$ to NADPH was maintained nearly constant and no increases were seen in the level of $H_2O_2$ and the activities of $superoxide/H_2O_2-detoxifying$ enzymes in shoots stress-treated for two days. Based on these results, it may be suggested that rice plants take a strategy to cope with an adverse situation of limited photophosphorylation created by water deficit in that cells facilitate ATP production through glycolysis and oxidative phosphorylation; in doing so, rice cells suppress NAD kinase activity, consequently up-sizing the NAD(H) pool at the expense of the NADP(H) pool. Several parameters associated with the stress symptoms are also of implicative that there is no overproduction of superoxide radical or the related active oxygen at least in rice seedlings.

• Journal of Astronomy and Space Sciences
• /
• v.27 no.3
• /
• pp.253-262
• /
• 2010

The electrical power system (EPS) of Korean satellites in low-earth-orbit is designed to achieve energy balance based on a one-orbit mission scenario. This means that the battery has to be fully charged at the end of a one-orbit mission. To provide the maximum solar array (SA) power generation, the peak power tracking (PPT) method has been developed for a spacecraft power system. The PPT is operated by a software algorithm, which tracks the peak power of the SA and ensures the battery is fully charged in one orbit. The EPS should be designed to avoid the stress of electronics in order to handle the main bus power from the SA power. This paper summarizes the results of energy balance to achieve optimal power sizing and the actual trend analysis of EPS performance in orbit. It describes the results of required power for the satellite operation in the worst power conditions at the end-of-life, the methods and input data used in the energy balance, and the case study of energy balance analyses for the normal operation in orbit. Both 10:35 AM and 10:50 AM crossing times are considered, so the power performance in each case is analyzed with the satellite roll maneuver according to the payload operation concept. In addition, the data transmission to the Korea Ground Station during eclipse is investigated at the local-time-ascending-node of 11:00 AM to assess the greatest battery depth-of-discharge in normal operation.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.22
• /
• pp.9759-9761
• /
• 2014

Purpose: To compare tumor size by mammography and sonography and align with pathological results in primary breast cancer cases. Materials and Methods: We retrospectively reviewed 95 primary breast cancer patients who underwent mammography and sonography from January 2011 to June 2012. The largest tumor diameter was chosen as sizing reference for each imaging modality. The measurements of mammography and sonography were considered concordant if they were within the measurement of pathological results ${\pm}0.5cm$. Pearson's correlation coefficient was calculated for imaging results. Results: The range of the maximum diameter was 0.6cm-10.5cm and mean value was $3.81{\pm}2.04cm$ by pathological results, 0.7cm-12.4 cm and $3.99{\pm}2.19cm$ by mammography, and 0.9cm-11.0cm and $3.63{\pm}2.01cm$ by sonography, respectively. Sonography (R: 0.754), underestimated tumor size, but had a better correlation with pathological tumor size compared to mammography (R: 0.676), which overestimated tumor size. Conclusions: Sonography is superior to mammography in assessment of primary breast cancer.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.5
• /
• pp.577-586
• /
• 2001

The objective of this study is the development of sizing and system shape discrete optime design algorithm which is based on the genetic algorithms (GAs). The algorithm can perform both size and shape optimum designs of space trusses. The developed algorithm was implemented in a computer program. The algorithm is known to be very efficient for the discrete optimization The genetic process selects the next design points based on the survivability of the current design points The evolutionary process evaluates the survivability of the design points selected from the genetic process in the genetic process of the simple genetic algorithms there are three basic operators : reproduction cross-over and mutation operators. The efficiency and validity of the developed discrete optimum design algorithm was verified by applying the algorithm to optimum design examples.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.2
• /
• pp.134-139
• /
• 2009

Various modules are generally combined with one another in order to perform rotorcraft preliminary design and its optimization. At the stage of the preliminary design, analysis fidelity is less important than the rapid assessment of a design is. Most of the previous researchers attempted to implement sophisticated applications in order to increase the fidelity of analysis, but the present paper focuses on a rapid assessment while keeping the similar level of fidelity. Each small-sized module will be controlled by an externally-operated global optimization module. Results from each module are automatically handled from one discipline to another which reduces the amount of computational effort and time greatly when compared with manual execution. Automatically handled process decreases computational cycle and time by factor of approximately two. Previous researchers and the rotorcraft industries developed their own integrated analysis for rotorcraft design task, such as HESCOMP, VASCOMP, and RWSIZE. When a specific mission profile is given to these programs, those will estimate the aircraft size, performance, rotor performance, component weight, and other aspects. Such results can become good sources for the supplemental analysis in terms of stability, handling qualities, and cost. If the results do not satisfy the stability criteria or other constraints, additional sizing processes may be used to re-evaluate rotorcraft size based on the result from stability analysis. Trade-off study can be conducted by connecting disciplines, and it is an important advantage in a preliminary design study. In this paper among the existing rotorcraft design programs, an adequate program is selected for a baseline of the design framework, and modularization strategy will be applied and further improvements for each module be pursued.