• Clinical Endoscopy
• /
• 제55권6호
• /
• pp.760-766
• /
• 2022

Background/Aims: Endoscopic submucosal dissection (ESD) is an effective method for resecting gastric adenomas and adenocarcinomas. A significant discrepancy was observed between endoscopic and pathological sizes in samples obtained from patients undergoing ESD. This study elucidates the factors affecting size discrepancy after formalin fixation. Methods: The records of 64 patients with 69 lesions were analyzed, including 50 adenomas and 19 adenocarcinomas. Data on location, gross shape, histology, and size after fixation in formalin were collected. Results: The mean size of the resected specimen appeared to decrease after formalin fixation (37.5 mm prefixation vs. 35.8 mm postfixation, p<0.05). The mean long axis diameter of the lesions was 20.3±7.9 mm prefixation and 13.4±7.9 mm postfixation. Size differences in lesions smaller than 20 mm were significantly greater than those in lesions larger than 20 mm (7.6±5.6 mm vs. 2.5±5.8 mm, p<0.01). In multivariate analysis, a tumor size of ≥20 mm was found to be an independent factor affecting size postformalin fixation (p<0.05). Conclusions: The endoscopic size of lesions before ESD may be underestimated in tumors larger than 20 mm in size. Therefore, increased attention must be paid during ESD to avoid instances of incomplete resection.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권1호
• /
• pp.404-421
• /
• 2020

A reversible data hiding scheme in JPEG compressed bitstreams is proposed, which could avoid decoding failure and file expansion by means of removing of bitstreams corresponding to high frequency coefficients and embedding of secret data in file header as comment part. We decode original JPEG images to quantified 8×8 DCT blocks, and search for a high frequency as an optimal termination point, beyond which the coefficients are set to zero. These blocks are separated into two parts so that termination point in the latter part is slightly smaller to make the whole blocks available in substitution. Then spare space is reserved to insert secret data after comment marker so that data extraction is independent of recovery in receiver. Marked images can be displayed normally such that it is difficult to distinguish deviation by human eyes. Termination point is adaptive for variation in secret size. A secret size below 500 bits produces a negligible distortion and a PSNR of approximately 50 dB, while PSNR is also mostly larger than 30 dB for a secret size up to 25000 bits. The experimental results show that the proposed technique exhibits significant advantages in computational complexity and preservation of file size for small hiding capacity, compared to previous methods.

• 대한기계학회논문집
• /
• 제16권7호
• /
• pp.1285-1293
• /
• 1992

본 연구에서는 glass/epoxy 직조된 복합재료에 있어서 원공 및 판폭의 크기가 노치강도에 미치는 영향을 명확히 하고, 또한 노치강도 및 파괴조건과 위에서 언급한 특성길이와의 관계를 검토하였다.

• 동력기계공학회지
• /
• 제4권2호
• /
• pp.40-45
• /
• 2000

Some engineering materials are often known to have considerable spatial variation in their resisting strength and other properties. The objective of this study is to investigate the averaging effect and the applicability of extremal statistic for the statistical size effect. In the present study, it is assumed that the material property is a stationary random process in space. The theoretical autocorrelation function of the material strength are discussed for several correlation lengths. And, in order to investigate the statistical size effect, the material properties was simulated by using the non-Gaussian random process method. The material properties were plotted on the Weibull probability papers. The main results are summarized as follows: The autocorrelation function of the material properties are almost independent of the averaging length. The variance decreases with increasing the averaging length. As correlation length is smaller, the slope is larger. And also, it was found that Weibull statistics based on the weakest-link model could not explain the spatial variation of material properties with respect to the size effect satisfactory.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.993-996
• /
• 2005

High speed machining(HSM) technique is widely used in the appliance, automobile part and mold industries, which has many advantages such as good quality, low cost and rapid machining time. but it also has problems like tool break, smooth tool path, and so on. In particular, small size end mill is easy to break, so it must be changed before interrupting operation. Generally, the tool life of small size end mill is effected by the milling conditions whose evaluated parameters are spindle, feedrate, and width of cut. The experiments are carried out by full factorial design of experiments using and orthogonal array. This paper shows optimal combination and mathematical model for tool life, and the analysis of variance(ANOVA) is employed to analyze the main effects and the interactions of these milling parameters and the second-order polynomial regression model with three independent variables is estimated to predict tool life by multiple regression analysis.

• Journal of Ecology and Environment
• /
• 제31권1호
• /
• pp.75-81
• /
• 2008

Rates of molecular evolution are known to vary widely among taxonomic groups. A number of studies, examining various taxonomic groups, have indicated that body size is negatively and clutch size is positively correlated with the rates of nucleotide substitutions among vertebrate species. Generally, either smaller body mass or larger clutch size is associated with shorter generation times and higher metabolic rates. However, this generality is subject to ongoing debate, and large-scale comparative studies of species below the Order level are lacking. In this study, phylogenetically independent methods were used to test for relationships between rates of the mitochondrial cytochrome b evolution and a range of life history traits, such as body mass and clutch size in the Order Galliformes. This analysis included data from 67 species of Galliformes birds and 2 outgroup species in Anseriformes. In contrast to previous studies, taxa were limited to within-Order level, not to Class or higher. I found no evidence to support an effect of life history traits on the rate of molecular evolution within the Galliformes. These results suggest that such relationship may be too weak to be observed in comparisons of closely related species or may not be a general pattern that is applicable to all nucleotide sequences or all taxonomic groups.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.73-80
• /
• 2006

High speed machining(HSM) technique is widely used in the appliance, automobile part and mold industries, because it has many advantages such as good quality, low cost and rapid machining time. But it also has problems such as tool breakage, smooth tool path, and so on. In particular, small size end mill is easy to break, so it must be changed before interrupting operation. Generally, the tool life of small size end mill is affected by the milling conditions whose selected parameters are spindle speed, feedrate, and width of cut. The experiments were carried out by full factorial design of experiments using an orthogonal array. This paper shows optimal combination and mathematical model for tool life, Therefore, the analysis of variance(ANOVA) is employed to analyze the main effects and the interactions of these milling parameters and the second-order polynomial regression model with three independent variables is estimated to predict tool life by multiple regression analysis.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권11호
• /
• pp.801-808
• /
• 2020

The purpose of the study is to find the factors that influence the financial leverage of Vietnam firms. The dependent variable is the financial leverage and the independent variables are firm size, asset structure, liquidity, growth opportunities, profitability, and firm age. The data are collected from Vietnam firms' annual financial reports in the period from 2010 to 2019. The study uses a sample of 448 Vietnam listed firms in the period. We also employ a panel regression model with pooled OLS and fixed effect to analyze the firms' financial data. The results of the model showed that financial leverage (FL) has a negative relationship with some factors such as asset structure (AS), liquidity (LQ), growth opportunities (GRW), profitability (ROA), and firm age (AGE) in the fixed effect regression. It means that when liquidity, profitability, and firm age increase, firms' financial leverage will decrease. While firms' financial leverage has still a positive relationship with the firm size (SIZE) in the model. As a result, when firm size increases, financial leverage will increase, too. The results showed that models are fit for the research and can be used to predict future findings. It is also useful for enterprises, financial advisors, investors, as well as the financial managers.

• Steel and Composite Structures
• /
• 제28권1호
• /
• pp.99-110
• /
• 2018

In this paper, a new size-dependent quasi-3D plate theory is presented for wave dispersion analysis of functionally graded nanoplates while resting on an elastic foundation and under the hygrothermaal environment. This quasi-3D plate theory considers both thickness stretching influences and shear deformation with the variations of displacements in the thickness direction as a parabolic function. Moreover, the stress-free boundary conditions on both sides of the plate are satisfied without using a shear correction factor. This theory includes five independent unknowns with results in only five governing equations. Size effects are obtained via a higher-order nonlocal strain gradient theory of elasticity. A variational approach is adopted to owning the governing equations employing Hamilton's principle. Solving analytically via Fourier series, these equations gives wave frequencies and phase velocities as a function of wave numbers. The validity of the present results is examined by comparing them with those of the known data in the literature. Parametric studies are conducted for material composition, size dependency, two parametric elastic foundation, temperature and moisture differences, and wave number. Some conclusions are drawn from the parametric studies with respect to the wave characteristics.

• 산업경영시스템학회지
• /
• 제37권1호
• /
• pp.79-90
• /
• 2014

The Purpose of this study is to empirically examine the impact of various internal and external innovation activities of SMEs on their innovation performances in the field of electronics and communication industry. Drawing upon the literature review, internal and external innovation activities are defined and conceptualized, and independent, dependent and moderator variables are developed. We have used survey-based data for this study from the survey of technology innovation activities in manufacturing industry, which was conducted by the Science and Technology Policy Institute (STEPI) in 2010. The main result of this study shows that there were no significant differences in the impact of innovation activities on market performance according to the size of SMEs. On the other hands, we found that there were significant differences in the impact of innovation activities on technological innovation performance according to the size of SMEs. Therefore, in order to make high technological innovation performance, companies in the field of electronics and communication industry need to properly implement the internal and external innovation activities by considering their size.