• Bulletin of the Korean Chemical Society
• /
• v.17 no.7
• /
• pp.648-653
• /
• 1996

We have shown several examples of characterization of multicomponent polymer systems by size exclusion chromatography coupled with a light scattering detector. Although SEC cannot provide a complete information for such systems due to its intrinsic limitation, one can extend its capability by combining multiple detection in order to get relevant information to some extent.

• Journal of Industrial Technology
• /
• v.17
• /
• pp.297-303
• /
• 1997

This study investigates the characteristics of humic acid before and after ozonation. The results were comapred in such terms as CODCr, CODMn, TOC(total organic carbon) and molecular size distribution. As a result of ozonation (with the dose of 3mgO3/mgHumic Acid), UV NIS absorbance, CODCr, CODMn and TOC were decreased with similar tendency. The mole fraction of high molecular size was rapidly decreased and the fraction ratio of low molecular size was increased through ozone treatment. This fact can be correlated with the change in the difference and the ratio of CODCr and CODMn (the value of CODCr-CODMn and CODMn/CODCr). From this result, it can be inferred that the molecular size and the degree of chemical oxidative degradation of humic acid after ozonation were changed.

• Transactions on Electrical and Electronic Materials
• /
• v.13 no.3
• /
• pp.125-128
• /
• 2012

This paper describes the design, simulation and characterization of an AA size electromagnetic energy harvester that is capable of converting environmental vibration into electrical energy. A magnetic spring technique is used to scavenge energy from low frequency external vibrations. The generator is characterized by ANSYS 2D finite element analysis, and optimized in terms of moving mass, fixed magnet size, coil width and load resistance. The optimized energy harvester is able to generate 53.5 mW of average power at 8.1 Hz resonance frequency, with a displacement of 0.5 mm.

• Journal of the Korean Ceramic Society
• /
• v.55 no.6
• /
• pp.581-589
• /
• 2018

This work concentrated on the effect of different laser beams on the microstructure and dielectric properties of $BaTiO_3$ nanoparticles at different calcinations times during the gelling preparation step. The nanoparticles were prepared by the sol-gel method. A green (1000 mW, 532 nm) and red laser beam (500 mW, 808 nm), were applied vertically at the center of stirring raw materials. The samples were sintered at $1000^{\circ}C$ for 2, 4, and 6 h. X-ray diffraction (XRD) analysis showed that samples prepared under the green laser have the highest purity. The FT-IR spectra showed that the stretching and bending vibrations of TiO bond without any other bonds, which are compatible to the X-ray diffraction (XRD) results. Samples were characterized by transmission electron microscopy (TEM), Scan electron microscopy (SEM), and UV-Visible spectrophotometer. Characterization showed the samples prepared under the green laser to have the highest particle size (~ 50 nm) and transparency for all sintering durations. Laser beam effects on electrical characterization were studied. BT nanoparticles prepared under the green laser show the higher dielectric constant, which was found to increase with sintering temperature.

• Applied Chemistry for Engineering
• /
• v.19 no.1
• /
• pp.27-30
• /
• 2008

Nano-sized phosphor powders were synthesized by the liquid phase method to confirm the size and morphology. By using the process, red phosphor particles with a size of 80 nm were obtained. The characteristic comparison of $Y_2O_3:Eu^{3+}$ and $YBO_3:Eu^{3+}$ was carried out and, as a result, $YBO_3:Eu^{3+}$ powders using boric salt showed an aggregated morphology and lower PL performance compared to $Y_2O_3:Eu^{3+}$.

• Journal of Powder Materials
• /
• v.16 no.4
• /
• pp.243-248
• /
• 2009

Carbon-coated Cu nanopowders with core/shell structure have been successfully fabricated by pulsed wire evaporation (PWE) method, in which a mixed gas of Ar/$CH_4$ (10 vol.%) was used as an ambient gas. The characterization of the samples was carried out using x-ray diffraction (XRD), scanning electron microscope (SEM), and high resolution transmission electron microscope (HRTEM). It was found that the nanoparticles show a spherical morphology with the size ranging of 10-40 nm and are covered with graphite layers of 2-4 nm. When oxygen-passivated Cu nanopowders were annealed under flowing argon gas (600 and 800$^{\circ}C$), the crystallinity of $Cu_2O$ phase and the particle size gradually increased. On the other hand, carbon-coated Cu nanopowders remained similar to as-prepared case with no additional oxide or carbide phases even after the annealing, indicating that the metal nanoparticles are well protected by the carbon-coating layers.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.12
• /
• pp.4253-4257
• /
• 2011

Sodium dodecyl sulfate-capillary gel electrophoresis (SDS-CGE) and capillary isoelectric focusing (CIEF) were employed to characterize and compare ricin E purified from the small grain seeds of Ricinus communis with ricin D isoform. During the purification of ricin E using ion-exchange and size-exclusion chromatography, SDS-CGE was found to be useful for monitoring the efficiencies of purification steps. SDS-CGE showed that the molecular size of ricin E was not significantly different from that of ricin D, which was confirmed by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. CIEF was useful for discriminating ricin E from ricin D based on their isoelectric points (pI). The pI values of ricin E and D were 8.6-8.8 and 7.0-7.4, respectively. This study demonstrates the usefulness of SDS-CGE and CIEF for the characterization of ricin toxins.

• BMB Reports
• /
• v.35 no.3
• /
• pp.255-261
• /
• 2002

GTP cyclohydrolase I (E.C. 3.5.4.16) is a homodecameric protein that catalyzes the conversion of GTP to 7,8-dihydroneopterin triphosphate (H2NTP), the initial step in the biosynthesis of pteridines. It was proposed that the enzyme complex could be composed of a dimer of two pentamers, or a pentamer of tightly associated dimers; then the active site of the enzyme was located at the interface of three monomers (Nar et al. 1995a, b). Using mutant enzymes that were made by site-directed mutagenesis, we showed that a decamer of GTP cyclohydrolase I should be composed of a pentamer of five dimers, and that the active site is located between dimers, as analyzed by a series of size exclusion chromatography and the reconstitution experiment. We also show that the residues Lys 136, Arg139, and Glu152 are of particular importance for the oligomerization of the enzyme complex from five dimers to a decamer.

• Journal of Powder Materials
• /
• v.14 no.5
• /
• pp.309-314
• /
• 2007

Zirconia powders with nano size pores and high specific surface areas were synthesized via aqueous precipitation and hydrothermal synthetic method using $ZrOCl_28H_2O$ and $NH_4OH$ under pH=11 and ambient condition. By this reaction. zirconia hydrate $(ZrO_x(OH)_{4-2x})$ was primarily synthesized and the obtained zirconia hydrate was heat treated hydrothermally using an autoclave at various temperatures under pH=11. X-ray diffraction, Scanning electron microscopy, Energy dispersive X-ray spectroscopy, FT-IR, Raman, Particle size analysis, DTA-TG, and BET techniques were used for the characterization of the powder. The synthesized zirconia showed an amorphous phase, however, the phase was transformed to the crystalline state during the hydrothermal process. The observed crystalline phase above $160^{\circ}C$ was a mixed phase of monoclinic and tetragonal zirconia. By the BET analysis, it was found that the specific surface area was ranged in $126{\sim}276m^2/g$ and the zirconia had the cylindrical shaped pores with average diameter of $2{\sim}7nm$.

• Nuclear Engineering and Technology
• /
• v.32 no.5
• /
• pp.446-456
• /
• 2000

Laser induced photoacoustic, fluorescence, and photon correlation spectroscopies were applied to the chemical characterization of radionuclides in connection with the radiowaste treatment and disposal. Their measuring principles and systems were briefly described together with their advantages over conventional spectroscopies. Also, other applications of lasers are introduced. Laser induced photoacoustic spectra were measured for a P $r^{3+}$ solution with a very low molar absorptivity. The detection sensitivity was 4.3 $\times$10$^{-5}$ c $m^{1}$ and was 100 times better than that of a UV/VIS spectrophotometer. The Eu(III) excitation spectra($^{7}$ $F_{0}$ longrightarrow $^{5}$ $D_{0}$ transition) were measured for Eu(III)-phthalate complexes using laser fluorescence spectroscopy, showing that only two species, 1:1 and 1:2 complexes, are present in the Eu(III)-phthalic acid system. The size and size distribution for colloidal humic acids and Eu(III)-humate colloids was determined using photon correlation spectroscopy. The presence of Eu(III) enhanced the aggregation of humic acids.s.