• Journal of Pharmacopuncture
• /
• v.24 no.4
• /
• pp.196-205
• /
• 2021

Objectives: Bruising is an important side effect of enoxaparin injection. Comfrey (Symphytum officinale) is used to treat different types of wounds, bone fractures, and bruising in traditional medicine in many countries for centuries. This study aimed to determine the effects of the Comfrey ointment on the bruise size and color following enoxaparin injection. Methods: This double-blind randomized clinical trial was conducted on 80 patients with acute coronary syndrome (ACS). The participants were randomly divided into two groups of 40, namely Comfrey and Placebo. Changes in bruise size and color in both groups were assessed daily before and after the intervention. Results: The Comfrey and Placebo groups were homogeneous in demographic and clinical variables. A downward trend was observed in the bruise size in both groups throughout the study. However, the bruise size was smaller in the Comfrey group than the Placebo group on day 2-5 of the intervention. Moreover, there was a significant difference in bruise color between the groups, with a shorter healing course in the Comfrey group. Conclusion: The Comfrey ointment accelerated the healing process of enoxaparin injection-induced bruising in patients with ACS. It is recommended as a safe and simple approach for these patients.

• Asian Journal of Atmospheric Environment
• /
• v.5 no.4
• /
• pp.237-246
• /
• 2011

To explore the sources of carbonaceous material in the airborne particulate matter (PM), comprehensive PM sampling was performed (3 to 14 January 2010) at a traffic hot spot site (HS), Farm Gate, Dhaka using several samplers: AirMetrics MiniVol (for $PM_{10}$ and $PM_{2.5}$) and MOUDI (for size fractionated submicron PM). Long-term PM data (April 2000 to March 2006 and April 2000 to March 2010 in two size fractions ($PM_{2.2}$ and $PM_{2.2-10}$) obtained from two air quality-monitoring stations, one at Farm Gate (HS) and another at a semi-residential (SR) area (Atomic Energy Centre, Dhaka Campus, (AECD)), respectively were also analyzed. The long-term PM trend shows that fine particulate matter concentrations have decreased over time as a result of government policy interventions even with increasing vehicles on the road. The ratio of $PM_{2.5}/PM_{10}$ showed that the average $PM_{2.5}$ mass was about 78% of the $PM_{10}$ mass. It was also found that about 63% of $PM_{2.5}$ mass is $PM_1$. The total contribution of BC to $PM_{2.5}$ is about 16% and showed a decreasing trend over the years. It was observed that $PM_1$ fractions contained the major amount of carbonaceous materials, which mainly originated from high temperature combustion process in the $PM_{2.5}$. From the IMPROVE TOR protocol carbon fraction analysis, it was observed that emissions from gasoline vehicles contributed to $PM_1$ given the high abundance of EC1 and OC2 and the contribution of diesel to $PM_1$ is minimal as indicated by the low abundance of OC1 and EC2. Source apportionment results also show that vehicular exhaust is the largest contributors to PM in Dhaka. There is also transported $PM_{2.2}$from regional sources. With the increasing economic activities and recent GDP growth, the number of vehicles and brick kilns has significantly increased in and around Dhaka. Further action will be required to further reduce PM-related air pollution in Dhaka.

• Journal of Environmental Health Sciences
• /
• v.33 no.6
• /
• pp.506-512
• /
• 2007

This study was conducted to describe the exposure levels of welding fumes by the type of manufacturers, work process, welding type and the size of manufacturers, and to find out the trend of chronological changes of airborne welding fume levels. The subjects of this study were 509 manufacturers, consisting of 11 types of manufacturers, 3 work processes, 7 welding types, in Busan from January, 1997 to December, 2005. Airborne concentration of welding fume was determined by manual of National Institute for Occupational Safety and Health (NIOSH), and the data were analyzed by using SPSS 10.0 for Windows program. The mean concentration of airborne welding fume in all manufacturers was $1.29\;mg/m^3$ (Range: $0.01{\sim}3.00\;mg/m^3)$. The level of welding fume was the highest, as $1.96\;mg/m^3$, for manufactures of motor vehicles, trailers and semi-trailers, which was lower than $5.0\;mg/m^3$ of 8 hr-TWA in Korean permissible exposure limit for welding fume. There was a significant difference in the mean levels of welding fumes by work process, showing the highest in welding workshop ($1.39\;mg/m^3$), followed by pipeline welding workshop ($1.26\;mg/m^3$) and engineering workshop ($1.20\;mg/m^3$). Among welding types, the mean level of welding fume was the highest in the type of $CO_2$ & arc welding, as $1.46\;mg/m^3$, followed by $CO_2$ welding ($1.40\;mg/m^3$), shielded metal arc welding ($1.31\;mg/m^3$), spot welding ($1.27\;mg/m^3$), and so on. The highest mean level of welding fume was $1.58\;mg/m^3$ in work process of pipe line welding workshop for the manufacturers of basic iron and steel, and $2.27\;mg/m^3$ in the type of arc welding for the manufactures building ship and boats. By the size of manufacturers, the mean concentration of welding fume for manufactures in small scale with less than 50 workers was the highest as $1.45\;mg/m^3$ (Range: $0.07{\sim}3.00\;mg/m^3)$. The mean level of welding fume was the highest as $1.39\;mg/m^3$ both in 1997 and in 2005, showing a trend of fluctuating periodically within a range of $1.10{\sim}1.39\;mg/m^3$. The above results suggested that more effective control program for work environment producing welding fumes should be developed and applied since there were significant variations in welding fume levels by the type of manufacturers, work processes, welding types, the size of manufactures, and by year.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.3
• /
• pp.23-28
• /
• 2018

Next generation displays show a trend of evolving from the display device environment (represented by existing televisions) to the mobile environment. The mobile display corresponding to the personal display is similar to a home theatre; however, they are advantageous because they are small and have a relatively lower weight. Therefore, the display industry has an interest in diverse product applications of displays, reproducing more accurate colours, and offering improved image quality from display devices of various sizes. To address these interests, a psychophysical experiment was conducted in this research. The experiment compared the size of the colour stimulation corresponding to foveal vision by gradually increasing the lightness of the background. This was based on the assumption of possible differences in colours being recognized by the lightness of the background and the size of the colour stimulation. Contrary to the results of previous studies, where the colours are identified more clearly as the size of the colour stimulation increases (assuming that the lightness of the background is not considered) here the results of the experiment showed that the attributes of the identified colours were different depending on the lightness of the background and the size of the colour stimulation. Based on the experimental results, it is possible to resolve errors in colour conversion that can occur when the input image is switched from a large screen size to a mobile size display, and to reproduce the colours more accurately and improve the image quality.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.2
• /
• pp.303-317
• /
• 2010

This study helps in the production of brassieres suitable for female adults by researching the actual wearing conditions and purchasing status, satisfaction rate, and preferences of female college students in their early 20's. The collected data was analyzed by a SPSSWIN 13.0 Program and the results of the research are as follows. 1. There is a noticeable difference between the breast satisfaction rate and breast size, in addition the satisfactory rate was higher in the normal breast size or a little ample size than in the very small or very big size. According to the shape, the satisfactory rate for the breast appeared to be high in the case of the recognition and evaluation of the hemisphere type than the flat, cone, pop out, and downward type. 2. For fitness, the looseness at the top of the cup (pressed between the breasts at the upper part of the front middle), pressing and looseness at the upper sides of the cup, inappropriate size of the cup, tightness of the wings, tightness at the bottom round of the breasts, the narrow width of the wire, wide space of the shoulder strings, and the sliding of the shoulder strings had problems that needed improvement. 3. The major priorities for purchasing brassieres are size, fitness, and aesthetic qualities. As a result, the size and the fitness are more important than the trend or decorations since the brassiere has the function to support the breasts that shows that hygiene and sanitation are recognized as an important standard for undergarment selection. The size and the fitness are important factors regardless of breast types in the examination of the selection standards of the brassieres for each breast type, but the cone and hemisphere types have higher preferences for design; the pop out type has more considerations for the material of the cloth. The result show that appearance is more important for smaller breasts, but the functionality of the brassier is more important than the appearance for medium and larger breast sizes.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.4
• /
• pp.2249-2254
• /
• 2013

The study was conducted to determine the effect of Malaysian jungle Tualang Honey (TH) on development of breast cancer induced by the carcinogen 7,12-dimethylbenz(${\alpha}$)anthracene (DMBA) in rats. Forty nulliparous female Sprague-Dawley rats were given 80 mg/kg DMBA then randomly divided into four groups: Group 1 served as a Control while Groups 2, 3 and 4 received 0.2, 1.0 or 2.0 g/kg bodyweight/day of TH, respectively, for 150 days. Results showed that breast cancers in the TH-treated groups had slower size increment and smaller mean tumor size (${\leq}2cm^3$) compared to Controls (${\leq}8cm^3$). The number of cancers developing in TH-treated groups was also significantly fewer (P<0.05). Histological grading showed majority of TH-treated group cancers to be of grade 1 and 2 compared to grade 3 in controls. There was an increasing trend of apoptotic index (AI) seen in TH-treated groups with increasing dosage of Tualang Honey, however, the mean AI values of all TH-treated groups were not significantly different from the Control value (p>0.05). In conclusion, Tualang Honey exerted positive modulation effects on DMBA-induced breast cancers in rats in this preliminary study.

• Nuclear Engineering and Technology
• /
• v.52 no.9
• /
• pp.2072-2077
• /
• 2020

The purpose of this study was to demonstrate the feasibility of sensing changes in a tumor during boron neutron capture therapy (BNCT) using a Monte Carlo simulation tool. In the simulation, an epi-thermal neutron source and a water phantom including boron uptake regions (BURs) were simulated. Moreover, this simulation also included a detector for positron emission tomography (PET) scanning and an adaptively-designed collimator (ADC) for PET. After the PET scanning of the water phantom, including the 511 keV source in the BUR, the ADC was positioned in the PET's gantry. Single prompt gamma rays were collected through the ADC during neutron irradiation. Then, single prompt gamma ray-based tomography images of different sized tumors were acquired by a four-step process. Both the signal-to-noise ratio (SNR) and tumor size were analyzed from each step image. From this analysis, we identified a decreasing trend of both the SNR and signal intensity as the tumor size decreased, which was confirmed in all images. In conclusion, we confirmed the feasibility of sensing changes in a tumor during BNCT using PET and an ADC through Monte Carlo simulation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.24 no.2
• /
• pp.214-223
• /
• 2000

In this research, a study on the characteristics of the liquid sheet formed by two impinging jets is presented. Using the interference phenomena of light, the thickness of the liquid sheet, which seems to heavily affect the size of the droplets, is measured and compared with existing theoretical modelings. Thinner liquid sheet is produced with larger impinging angle, smaller orifice diameter, and higher azimuthal angle but the jet velocity doesn't affect the thickness. More viscous liquid produces thicker liquid sheet. The theoretical modelings predict the same trend as the experiments but the thickness values are overestimated at low azimuthal angles. This difference is gradually decreased as the azimuthal angle is increased: The breakup mechanism of the droplets from the liquid sheet is visualized by a high speed camera. The crest around the edge of the liquid sheet is protruded with the accumulation of liquid at the end of protuberance, which contracts into a spherical shape and then becomes detached when the stem breaks down, producing large droplets with a few small size of satellites.

• Microbiology and Biotechnology Letters
• /
• v.18 no.5
• /
• pp.517-524
• /
• 1990

The solubilization and desolubilization of proteins in CTAB/hexanol/isooctane reverse micellar system were investigated for the selective separation of proteins. Several proteins were used, including bovine serum albumin (BSA), pepsin, trysin and ribonuclease-a. Most proteins could be solubilized into reverse micelles in the pH range above the isoelectric point of each protein, where the net charge of protein was opposite to that of surfactant. However BSA was solubilized above pH 10, which is serveral pH units above the pI 4.9. The kinds of anions in aqueous phase influenced on protein solubilization while no significant trend was observed with different cations, Protein solubilization decreased with increase of the ion size in the order of F -, C1-, Br- and I -. The size of CTAB micelles did not change significantly with increasing ionic strength, but the solubilization decreased. Protein desolubilization showedropposite behaviors to the solubilization. Several model mixtures such as pepsin/ trypsin, pepsin/ribonuclease-a and BSAlribonucleaee-a were successfully separated from each other without changing enzymatic activities.

• The Korean Journal of Applied Statistics
• /
• v.10 no.2
• /
• pp.215-226
• /
• 1997

The purpose of the labor statistics survey is to collect materials on employment, wages and the working time and to analyze the trend of the labor situation. in this research, the stratification variables are industry and the size of establishment. The sample are selected by stratified one stage sampling method in order to produce the reliable estimates of labor statistics. For local labor statistics, we design the sample survey using the city and province as sub-population. So we are able to produce the local area estimates of labor statistics with respect to industry and the size of establishment.