• 상하수도학회지
• /
• 제30권4호
• /
• pp.409-415
• /
• 2016

Magnetite particles were synthesized by co-precipitation of water-soluble 밀 스케일-derived precursor by various concentrations of (0.5, 0.67, 1, 2 N) NaOH and (0.6, 0.8, 1.2, 2.4 N) $NH_4OH$. It is theoretically known that as the concentration of the alkaline additive used in iron oxide synthesis increases, the particle size distribution of that iron oxide decreases. This trend was observed in both kind of alkaline additive used, NaOH and $NH_4OH$. In addition, the magnetite synthesized in NaOH showed a relatively smaller particle size distribution than magnetite synthesized in $NH_4OH$. Crystalline phase of the synthesized magnetite were determined by X-ray diffraction spectroscopy(XRD). The particles were then used as an adsorbent for phosphate(P) removal. Phosphorus adsorption was found to be more efficient in NaOH-based synthesized magnetite than the $NH_4OH$-based magnetite.

• Nuclear Engineering and Technology
• /
• 제46권6호
• /
• pp.817-824
• /
• 2014

To ensure the safety of research reactors, the water level must be maintained above the required height. When a pipe ruptures, the siphon phenomenon causes continuous loss of coolant until the hydraulic head is removed. To protect the reactor core from this kind of accident, a siphon breaker has been suggested as a passive safety device. This study mainly focused on two variables: the size of the pipe rupture and the timing of air entrainment. In this study, the size of the pipe rupture was increased to the guillotine break case. There was a region in which a larger pipe rupture did not need a larger siphon breaker, and the water flow rate was related to the size of the pipe rupture and affected the residual water quantity. The timing of air entrainment was predicted to influence residual water level. However, the residual water level was not affected by the timing of air entrainment. The experimental cases, which showed the characteristic of partical sweep-out mode in the separation of siphon breaking phenomenon [2], showed almost same trend of physical properties.

• 패션비즈니스
• /
• 제18권3호
• /
• pp.91-103
• /
• 2014

Shirts which have been a inner-wear in men's suit in the past, are being changed into an item that 20's men utilize to their individuality. Dress shirts have gotten out of its shape, becoming tight and slim with activity and fashion trend. In this study, two patterns of fitted dress shirts in a clothing construction text book were compared with the pattern of an apparel company with regard to the size tolerance and appearance silhouette; this comparison was performed through a fitting test and an appearance evaluation. According to the study, size tolerance of chest girth and waist girth were about 6~8cm and 10~18cm, respectively. Neck girth of the collar was tight in both the fitting test and appearance evaluation. Thus, the measurement value of the neck base girth had to be used for the collar pattern making. Moreover, approximately 35cm is a moderate size for the width on the upper arm in sleeve. Therefor the factors such as size tolerance of waist girth, height of sleeve cap, slim sleeve width and measurement value of neck base girth are being considered for the pattern making of fitted dress shirts.

• 한국식품조리과학회지
• /
• 제25권4호
• /
• pp.427-434
• /
• 2009

To increase rice consumption and substitute rice flour for wheat flour to make gluten-free bakery products, the physicochemical and pasting properties of rice flours prepared from raw and soaked rices passed through different size screens were investigated. The quality properties of manju dough and preparation of rice manju were also measured. Dry milled flour with soaked rice (DMFSR) were decreased in ash and crude lipid contents compared to dry milled flour with raw rice (DMFRR). Water binding capacity, damaged starch content, and L value of rice flour increased with decreasing particle size, but the b value decreased. Peak, cold, and breakdown viscosities of DMFSR were higher than those of DMFRR by RVA. Hardness of manju dough with DMFSR was lower than that with DMFRR, but that of manju shell exhibited a reverse trend. Sensory difference testing revealed the smoothness of surface, hardness, roughness, and overall quality were significantly different (p<0.05). The smoothness of the surface of manju with DMFRR-200 and all DMFSR were better than that of manju prepared with wheat flour. Hardness showed lower values in DMFRR-200, and all DMFSR as well as wheat flour and roughness decreased with decreasing particle size. Rice manju with wheat flour, DMFRR-200, DMFSR-120, and DMFSR-170 ranked above 5 points and were not significantly different (p<0.05).

• 대한금속재료학회지
• /
• 제47권11호
• /
• pp.699-706
• /
• 2009

Deformation behavior of pure aluminum during equal channel angular pressing (ECAP) was simulated using a three-dimensional version of the finite element method in conjunction with a constitutive model based on the dislocation density and cell evolution. The three-dimensional finite element analyses for the prediction of microstructural features, such as the variation of the dislocation density and the cell size with the number of ECAP, are reported. The calculated stress and strain and their distributions are also investigated for the route Bc ECAP processed pure aluminum. The results of finite element analyses are found to be in good agreement with experimental results for the dislocation cell size. Due to the accumulation of strain throughout the workpiece and an overall trend to saturation in cell size, a decrease of the difference in cell size with the number of passes (1~4) was predicted.

• 대한화학회지
• /
• 제67권1호
• /
• pp.33-41
• /
• 2023

Nanocrystallne WO₃ and MoO₃ with several different sizes and crystal structures were prepared by simple acid precipitation and subsequent heat treatment. The photochromic (PC) properties of these samples were comparatively investigated in powder state by monitoring diffuse reflectance spectral changes after bandgap irradiation. The PC effect of hexagonal WO₃ and monoclinic WO₃ strongly depended upon crystallite size rather than crystal structure. The smaller the crystallite size, the better the PC effect. However, orthorhombic WO·H₂O and MoO₃ having hexagonal and orthorhombic structures did not follow this trend. One consistent result for all WO₃ and MoO₃ samples is that the heat treatment in air, which changes crystallinity, whether it changes the crystal structure or only the crystallite size, reduces the PC effect. Since the thermal treatment reduces the surface oxygen defect sites, we believe that the PC effect of WO₃ and MoO₃ depends critically on the surface oxygen defect sites that serve as deep trap sites for photogenerated electrons and oxygen radical holes. We also found that the proton insertion claimed by double charge injection model is not critical for the PC effect.

• 한국지구과학회지
• /
• 제34권2호
• /
• pp.120-135
• /
• 2013

강릉항 주변 해역의 퇴적환경의 변화 특성을 파악하기 위해 2007년 2월부터 2009년 2월까지 총 5회에 걸쳐 획득한 퇴적물의 조직변수와 측량 자료를 분석하였다. 연구지역의 퇴적물은 주로 모래로 이루어져 있고 외해 방향으로 갈수록 입도가 세립해진다. 하계에 평균입경은 외해역, 강릉항 내측, 남항진 해빈에서 동계보다 조립하게 나타났으며, 안목 해빈에서는 점차적으로 세립해지는 양상을 나타냈다. 강릉항 완공 전의 연구 결과와 비교할 때, 강릉항 완공 후 평균입경은 안목 해빈에서 세립해졌으나, 남항진 해빈에서 조립해졌다. 2년간의 침 퇴적 양상을 보면, 수심 5-10 m 사이 지역에서는 침식이, 수심 2-5 m 사이 지역에서는 퇴적이 우세하며, 수심이 2 m 보다 얕은 지역에서는 침식과 퇴적이 교호하는 형태로 침식이 다소 우세하게 나타났다. 연구지역의 퇴적물 조직변수와 침 퇴적 분포는 지속적으로 변화하고 있다. 이러한 변화는 계절적인 변동뿐만 아니라 장기변화 추이 양상을 보이고 있고, 강릉항 완공 후 장기변화 추이는 유지되는 것으로 생각된다.

• Animal Bioscience
• /
• 제34권6호
• /
• pp.1061-1069
• /
• 2021

Objective: This study was conducted to evaluate the effects of feed processing and particle size on growth performance, nutrient digestibility, carcass characteristics, and gastric health in growing-finishing pigs. Methods: A total of 360 growing pigs (22.64±0.014 kg initial body weight [BW]) were allocated to 1 of 6 treatments with 6 replicates by BW and sex, and 10 pigs were housed in one pen in a randomized complete block design. The BW and feed intake were recorded to calculate growth performance. For the digestibility trial, a total of 24 barrows with an initial BW of 33.65±0.372 kg were split into 6 treatments with a completely randomized design. Dietary treatments were designed by a 2×3 factorial arrangement of treatments based on two main factors, particle size (600, 750, 900 ㎛) and feed form (mash and pellet) of diet. Experimental diets were formulated to contain the requirements of the NRC (2012). Results: The BW and average daily gain were not changed by dietary treatments, and the feed intake of finishing pigs (wks 6 to 12) was increased when the pigs were fed a mash diet (p<0.05). For the overall period, the feed efficiency of pigs was improved with the pellet diet (p<0.01) and reduced particle size (p<0.05). The pellet diet had effects on increasing crude fat digestibility (p<0.01) relative to a mash diet, but there was no considerable change in dry matter and crude protein digestibilities by dietary treatments. In the evaluation of gastric health, a trend for an increased incidence of keratinization in the esophageal region was observed as particle size decreased (p = 0.07). Conclusion: Feed efficiency could be improved by pellet diet and reduced particle size. Nutrient digestibility, carcass characteristics, and gastric health were not affected by feed form, and particle size ranged from 600 to 900 ㎛.

• 한국해양학회지:바다
• /
• 제3권2호
• /
• pp.59-70
• /
• 1998

가로림만 조간대 표층퇴적물의 입도조직변수(평균입도, 분급도 및 왜도)를 기초로 '이차원 퇴적물 이동벡터모델'을 이용하여 퇴적물의 이동방향을 추정하였고 이에 따른 퇴적물의 이동현상을 해석하였다. 채취된 퇴적물은 각 정점마다 전체와 조립질(< 4.5 ${\phi}$)로 구분하여 각각의 퇴적물이동방향(15 경우)을 구하였고, 이 방향과 지형, 층면형태(bedform)의 정밀측정, 그리고 여러 번의 현장관찰을 기초로 결정된 퇴적물의 실제이동방향과 비교하였다. 퇴적물의 실제이동방향과 가장 일치하는 이동벡터는 조립질 퇴적물에서 퇴적물 이동방향으로 퇴적물이 세립해지고, 분급이 좋아지며 왜도가 감소하는 경우와 퇴적물이 조립해지고, 분급이 좋아지며 왜도가 증가하는 경우를 조합한 M 경우이다. 이는 조립질 퇴적물이 연구지역의 퇴적물이동에 주요 구성성분이며, 세립질(> 4.5 ${\phi}$)을 포함하는 전체 퇴적물보다 퇴적기작이 더 단순하므로 '퇴적물이동벡터모델'과 잘 부합하는 것으로 보인다. 또한 전체 퇴적물과 조립질 퇴적물 모두 퇴적물의 이동방향으로 분급도가 좋아지는 경향이 뚜렷한데, 이는 퇴적기작의 복잡성과 관계없이 연속적인 수리에너지는 퇴적물의 분급을 더 좋게 한다는 것을 증명한다. 또한 이 연구결과를 통하여 사주조간대의 조립질퇴적물의 이동은 남북방향으로 놓여 있는 만 입구 동주수로를 통하여 저조선에서 상부조간대로 이동하면서 퇴적되었고, 일부는 동주수로를 지나 남수로로 공급되어 반시계방향으로 돌며 북쪽지역으로 이동 퇴적되었음이 밝혀졌다. 조립질 퇴적물은 사주에 퇴적되지만, 일부는 북수로를 따라 썰물때 다시 만밖으로 나가는 것으로 퇴적물이동벡터모델이나 퇴적물 실제이동방향의 관찰 모두에서 증명되었다. 따라서 북수로 및 북동쪽 뻘질모래지역은 만 밖에서 운반된 부유퇴적물과 조립퇴적물이 동시에 퇴적되는 지역이며, 지역적으로 조립질과 세립질의 분리퇴적현상이 때때로 관찰되기도 하는 수리역학적 퇴적물 혼합지역이다. 사주의 육지이동과 북수로 발달현상은 조립퇴적물이 만 밖이나 만 입구 등 근원지(장안퇴를 포함한 사퇴)로부터 더 많이 유입되었거나 혹은 상대적 해수면의 상승의 결과로 보인다.

• 한국주거학회논문집
• /
• 제22권3호
• /
• pp.59-71
• /
• 2011

The purpose of this study is to investigate the basic historical characteristics and its modern trend of Torajan traditional housing architecture in Sulawesi Province, Indonesia. The Toraja culture belongs to the cosmological culture with Cosmos centric characteristics. A traditional house, being called 'tongkonan' in Toraja region, is more than just a structure, representing the symbol of family identity and tradition. The Torajan architecture is a combination of the myth and cosmos, also regional conditions. With a short description of the general conditions and spiritual values of the Toraja, this paper explains the space-composition, the stylistic characteristics, the ornamental elements, construction, and its modern trend, etc. In general, it is raised on stilts several metres high, with a dramatically boat-shaped roof. Village layout varies according to size. The houses are arranged in a row, side by side, with their front gables facing north. Each house stands opposite its own rice-barn. The houses with their oblong ground-plans, built on piles set on stones. The interior is divided into three or four rooms, having few window. The houses are embellished with carving and paintings, and the facades display engraved and painted geometric and figural designs. The most frequent motif is the buffalo head, ranging from the realistic to the highly stylized. The Torajan traditional housing have experienced radical changes during the Modern period. In spite of the popularity of new modern house-styles, the traditional architectural style is often now constructed as an icon of Toraja identity. This paper will be helpful for understanding regional diversity of the traditional housing in Southeast Asia.