• ALGAE
• /
• v.28 no.4
• /
• pp.365-369
• /
• 2013

The objective of this study was to determine the optimal blade size and timing to transplant seed-stock of Ecklonia cava Kjellman onto the reef structure. We used the modified artificial stepped reef structure. A total of 14 units (3.0 m length ${\times}$ 3.5 m width ${\times}$ 1.1 m height) were deployed 7-8 m deep under the water to examine the optimal blade size and timing to transplant seed-stock of E. cava onto the structures. Sporophytes of E. cava <1 cm in length were all died within 1 month of transplantation. The blades of 5-10 cm in length which were transplanted in March 2007 survived and grew well on the artificial reefs. Growth rates of 5-10 cm size class were higher than those of longer blade sporophytes (20-30 cm size class, transplanted in April) while the survival rates showed no difference between the classes of blade size. Both classes of 5-10 and 20-30 cm in length grew until July, and a reduction in size had occurred in September. These results indicate the importance of the blade size of E. cava and timing for successful transplantation of the seaweed on artificial reef structures.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.13 no.2
• /
• pp.110-118
• /
• 2008

The regulated peak power tracking (RPPT) systems such as the series structure and the parallel structure are commonly used in the satellite space power system. However, this structure processes the solar array power to the load through two regulators during one orbit cycle, which reduces the energy transfer efficiency. The series-parallel structure for the RPPT system can improve the power conversion efficiency, but an additional regulator increases the cost, size and weight of the system. In this paper, a simplified series-parallel space power system that consists of two regulators is proposed. The proposed system has the similar energy transfer efficiency with the series-parallel structure by adding one switch to the series structure, which reduces the cost, size and the weight. The large signal stability analyses is provided to understand the four main modes of system operation. In order to compare the energy efficiency with a series structure, the simulation is performed. The experimental verifications are performed using a prototype hardware with TMS320F2812 DSP and 200W solar arrays.

• The KIPS Transactions:PartA
• /
• v.10A no.5
• /
• pp.453-462
• /
• 2003

IP address lookup of router searches and decide proper output link using destination address of IP packet that arrie into router. The IP address lookup is essential part in te development of high-speed router needed to high-speed backbone network as one of bottleneck of router performance. This paper introduces DTC data structure that can support gigabit IP address lookup by dynamic trie compression technique that just uses small memory in conventional Pentium CPU. When make a forwarding table by trie compression, the DTC can dynamically select a size of data structure with considering correlation between table's size and searching speed. Also, when compress the prefix trie, DTC makes IP address lookup on the forwarding table of a search on the high speed SRAM cache by minimizing the size of data structure reflecting the structure of the trie. In the experiment result, the DTC data structure recorded performance of maximum $12.5{\times}10^5$ LPS (lookup per second) in conventional Pentium CPU through a dynamic building of most suitable compression over variety of routing tables.

• Tribology and Lubricants
• /
• v.32 no.3
• /
• pp.95-100
• /
• 2016

As an alternative fuel, biodiesel has excellent lubricating property. Previously, our research group reported that the properties of biodiesels depended on their composed molecular structure. In this study, we investigate lubricity and the mechanism of lubricity improvement of synthesized biodiesel molecules. We synthesize four types of biodiesel components from fatty acid via fisher esterification and soybean biodiesel from soybean oil via transesterification in high yield (92-96%). We analyze the lubricity of the five 5 types of biodiesel using HFRR (high frequency reciprocating rig). We estimate that the mechanism of lubricity is relevant to the molecular structure and structure conversion of biodiesel. The test results indicate that the longer the length of molecules and the higher the content of olefin, the better the lubricity of the biodiesel molecules. However, the wear scar size of the first test samples’ do not show a regular pattern with the wear scar size of the second test samples’. Moreover, we investigated the structure conversion of the biodiesels by using GC-MS for the recovered biodiesel samples from the HFRR test. However, we do not detect structure conversion. Thus, we conclude that the lubricity of biodiesel depends on how effectively solid adsorption and boundary lubrication occurs based on the size of the molecule and the content of olefin in the molecule. In addition, HFRR test condition in not sufficient for Diels-Alder cyclization of biodiesel components.

• Journal of Korea Foundry Society
• /
• v.22 no.5
• /
• pp.231-237
• /
• 2002

The structure and properties of HSLA steel obtained by Osprey forming process were investigated. The porosities were generated at the bottom of specimen due to the quenching effect of cold substrate during forming. The steel had a bainitic structure. The grain size were different among positions due to the cooling rates. The elements such as Mn, S, Si, Cr, Mo and etc. were contained in inclusions. They were formed at grain boundries. The size of them was $1{\sim}2{\mu}m$ and has nothing to do with the chemical composition. MnS and NbC were precipitated during rolling and aging.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.5
• /
• pp.1699-1702
• /
• 2012

$TiO_2$ nanostructures with various morphologies like cubes, spheres, hexahedral pillars and spherical tubes were synthesized by microwave-assisted hydrothermal process. Each structure was obtained by changing the relative concentrations of titanium tetraisoproxide (TTIP), tetrabutylammonium hydroxide (TBAH) and ethanol. Scanning electron microscopy (SEM), transmission electoron microscopy (TEM), X-ray diffraction and Brunauer-Emmett-Teller (BET) surface area analysis were used to characterize the synthesized $TiO_2$ nanostructures. From these results, it has been proved that $TiO_2$ structure could be controlled to have specific morphology, size, surface area, pore volume and pore size distribution.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2090-2092
• /
• 2003

Adaptive algorithms are widely used for various applications. One challenging application is an echo canceller in the long distance telephony network. This paper proposes the new variable step-size algorithm for adaptive lattice structure for echo cancellation. The new algorithm is using power of the output signal and the error signal to controlled the step of adaptation process. By this technique, the proposed algorithm is an excellent and effective in good stability. Performance comparison of the proposed algorithm and the other algorithm is made through simulation results.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.259-262
• /
• 2002

This paper provides the experimental verification of a non-destructive time domain approach to examine structural damage. Time histories of the vibration response of structure were used to identify the presence of damage. Damage in a structure cause changes in the physical coefficients of mass density, elastic modulus and damping coefficient. This paper examines the use of beam like structures with PVDF sensor and PZT actuator to perform identification of those physical parameters, and hence to detect the damage. Experimental results are presented from tests on cantilevered composite beams damaged at different location and with damage of different dimensions. It is demonstrated that the method can sense the presence of damage, and characterize the damage to a satisfactory precision.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.16 no.3
• /
• pp.43-60
• /
• 1998

The photosensitive properties and spectroscopic characteristics in the organic photoconductor(OPC) with carrier generation layer(CGL) of poly(vinylbutyral)(PVB) and polycarbonate(PC) doped with titanyl phthalocyanine(TiOPc) were investigated. The change of crystal structure of TiOPc dispersed with PVB and PC was shown by UV-visible reflective spectrum and FT-IR spectrum and mainly caused by the difference of solubility of solvent and the interaction between TiOPc and binder. The particle size of TiOPc dispersed with PVB measured by SEM was smaller than in PC. The crystal structure of TiOPc dispersed with PVB was amorphous type and in PC was $\alpha$type. It was found that the photosensitive properties of OPC were dependent on the change of absorbance and ionization potential of TiOPc occurred from the difference of crystal structure. In this work, the photosensitivity of OPC of TiOPc dispersed with PVB was better than PC due to the crystal type and the smaller particle size.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.101-104
• /
• 2000

Milli-structure components are classified as component group whose size is between macro and micro scale. that is, about less than 20mm and larger than 1mm. The forming of these components has a typical phenomenon of bulk deformation with thin sheets because of the forming size. In order to conventional metal forming, where numerical process simulation is already idly applied, the micro-forming process is characterized by some scale effects which have to be considered in an advanced process simulation. milli-structure rectangular cup drawing is analyzed and designed using the finite element method and experiment. The result of the finite element analysis is confirmed by a series of experiment.