• 수산해양기술연구
• /
• 제58권1호
• /
• pp.1-9
• /
• 2022

In this study, the selection action on the mesh in the net pot for whelk (Buccinum opisthoplectum) is experimentally considered, and the selectivity was compared by the SELECT model and the Nashimoto's method with the probability model according to the contact shape of the mesh and the whelk. The experiments of the mesh size selectivity was conducted for two mesh sizes: 70 mm (inner stretched size 65.4 mm) and 44 mm (inner stretched size 39.5 mm). Selectivity experiments were conducted three times in total for each mesh size used 264 whelks. In addition, Nashimoto's method analyzed the retention probability using probability model for whether the mesh passed or not based on the carapace width of the whelk. As a result of the selectivity analysis, the 50% selection carapace width for the mesh size of 70 mm was similar to 43.62 mm in the SELECT model and 42.64 mm in the Nashimoto's method. However, the 44 mm mesh with relatively small mesh size showed differences of 40.01 mm and 26.80 mm, respectively. As for the mesh size selectivity of whelk, it was found that the smaller the mesh size, the lower the selectivity. In addition, in the selectivity study on the mesh size of whelk, an evaluation method that closely considers the contact shape between the mesh and the target species is required.

• 수산해양기술연구
• /
• 제59권2호
• /
• pp.99-109
• /
• 2023

In this study, a comparative test operation was conducted through the alternate haul method to examine the selectivity of the four mesh sizes (60 mm, 90 mm, 110 mm, and 130 mm) of the trawl codend. The selectivity was analyzed using the SELECT model considering the fishing efficiency (split parameter) of each fishing gear in the comparative test fishing operation in the trawl and the maximum likelihood method for parameter estimation. A selectivity master curve was estimated for several mesh sizes using the extended-SELECT model. As a result of analyzing the selectivity for silver croaker based on the results of three times hauls for each experimental gear, it was found that the size of the fish caught increased as the size of the mesh size increased. When the selectivity for each mesh size analyzed by the SELECT model considering the split ratio was evaluated based on the size of the AIC value, the estimated split model was superior to the equal split model. Based on the master curve, the 50% selection length value was 2.893, which was estimated to be 136 mm based on the mesh size of 60 mm. In some selectivity models, there was a large deviance between observed and theoretical values due to the non-uniformity of the distribution of fished length classes. As a result, it is considered that appropriate sea trials and selectivity evaluation methods with high reliability should be applied to present trawl fishery resource management methods.

• 수산해양기술연구
• /
• 제49권3호
• /
• pp.200-207
• /
• 2013

This paper presents the mesh selectivity of a net pot for common octopus Octopus minor for the sustainable resources management of common octopus. The filed experiments were carried out the total 10 times in the southern part of coastal sea in Korea from March to May in 2010 using net pots of five different mesh sizes (16, 18, 20, 22 and 26mm). The test of size selectivity, indicated a 50% selection value on the logistic master curve of 3.195, whereby 50% of individuals with a mantle size of approximately 70.3mm selected a mesh size of 22mm. Considering that 50% of common octopus entering sexual maturity have a mantle size of 70.6mm, the optimum mesh size should be equal to, or larger than 22mm.

• 수산해양기술연구
• /
• 제48권1호
• /
• pp.10-19
• /
• 2012

The mesh selectivity of a drift net for yellow croaker (Larimichthys polyactis) was examined in field experiments with six different net mesh size (40, 45, 50, 55, 60 and 65mm) from April to December, 2008 in the coastal areas of Jeollanam-do in Korea. The total catch of 6,748 consisted of yellow croaker (n=6,310; 89.1% of total catch), common mackerel (n=158; 5.6%) and other species (n=280; 9.6%). The selectivity curve for yellow croaker was fit by the models of selectivity curve in SELECT method. The optimal mesh size for 50% retention for minimum landing size (191mm) of yellow croaker was estimated as 49.6mm-51mm by selectivity curves. And the bi-normal model for the selectivity curve was found to fit the data best.

• 수산해양기술연구
• /
• 제51권2호
• /
• pp.171-178
• /
• 2015

Selectivity and by-catch are the main features used to define fish catch for fisheries management or to determine fishing gear efficiency. A fish girth distribution analysis was carried out to determine the retention rate of juveniles discarded and to establish common selectivity for a multispecies catch. Total body length, body weight, and girth of juvenile fish retained in the cod-end and cover net separately were collected using an 18-mm mesh cover net during 12 fishing trials with a 41-mm cod-end beam trawl. The by-catch weight ratio in the cod-end was twice that of the by-catch ratio in number. The 50% selectivity of body length and 50% girth of redfin velvet fish were not significantly different between the cod-end and cover net, whereas those of other fish species were significantly different between the cod-end and cover net. The difference in 50% selectivity girth of other fish between the cod-end and cover net was similar between cod-end mesh size and cover net mesh size. Furthermore, the difference in 50% body length selectivity of other fish between the cod-end and cover net was almost double the difference in girth. Girth selectivity in a multispecies catch using towed fishing gear was effectively used to determine fish and net mesh size.

• 수산해양기술연구
• /
• 제29권3호
• /
• pp.177-182
• /
• 1993

In order to estimate the mesh selectivity master curves and the optimum mesh size, experiments were made by the cover net method with the cod-ends of the five different the opening mesh sizes(51.2mm, 70.2mm, 77.6mm, 88.0mm and 111.3mm). After that 163 hauling were performed and there by investigated, on the training vessel Saebada in the Southern Korean Sea and East China Sea from June 1991 to August 1992. In this report, the mesh selectivity master curves were fitted by using logistic function(S=1/(1+exp super(-(aR+b))), R=(L-L sub(0))/(M-M sub(0)) and the optimum mesh sizes were estimated from each master curve. In this case, a and b are the selection parameters, M is the mesh size of each experimental cod-end. L is body length, L sub(0) and M sub(0) is the distance from the coordinate origine to intersection of linear regression between 25% and 50% selection length. The results obtained are summarized as follows; 1. Trachurus japonicus: Mesh selectivity master curve parameters: a and b were 2. 25, -4.73 respectively and optimum mesh size was estimated to be 79.3mm. 2. Trichiurus lepturus: Mesh selectivity master curve parameters: a and b were 0.81, -3.17 respectively and optimum mesh size was estimated to be 64.5mm. 3. Photololigo edulis: Mesh selectivity master curve parameters: a and b were 1.30m, -4.10 respectively and optimum mesh size was estimated to be 89.9mm. 4. Todarodes pacificus: Mesh selectivity master curve parameters: a and b were 1. 35, -3.45 respectively and optimum mesh size was estimated to be 89.4mm.

• 수산해양기술연구
• /
• 제56권3호
• /
• pp.193-201
• /
• 2020

The mesh selectivity of a drum shaped pot for finely-striate buccinum (Buccinum striatissimum) was conducted a total of eight times with four different mesh sizes (22, 35, 50 and 60 mm) from May to September, 2019 in the eastern coastal waters of Korea. The size selectivity analysis was estimated by the SELECT method to express logistic selectivity curves. In the results, the catch of finely-striate buccinum was occupied about 90% in the total catch weight. The equation of the master curve of selectivity was estimated to s(R) = exp(-7.778R+9.983)/[1+exp(-7.778R+9.983)]. The relative shell height of 50% selection was 1.284 and the selection range (SR) was 0.282. The optimal mesh size for 50% selection on the minimum maturation size (75 mm, Shell height) was estimated more than 60 mm by the master selectivity curve.

• 수산해양기술연구
• /
• 제55권4호
• /
• pp.285-293
• /
• 2019

The mesh selectivity of hairtail (Trichiurus lepturus) caught by coastal drift gill net was examined in field experiments with three different mesh sizes (45, 50 and 55 mm) from October to November, 2013 in the coastal areas of south-west of Jeju province. The mesh selectivity tests were conducted with the experimental net to be set middle part of conventional driftnets. The mesh selectivity tests were carried out the total of four times. The selectivity curve was estimated by the Kitahara's and Fujimori's method. In the results, the catch number of hairtail was 653 (125.8 kg) and occupied 34.8% in total catches weight. The optimal mesh size for 50% selection on the minimum landing size (180 mm, AL) and the first maturity size (260 mm, AL) of hairtail were estimated as 47.2 mm and 64.5 mm by master selectivity curves, respectively.

• 한국수산과학회지
• /
• 제30권6호
• /
• pp.916-922
• /
• 1997

This paper attempted to estimate mesh selectivity of gill nets for neon flying squid in the north Pacific Ocean. The 11 linear regressions, (P<0.05) were obtained using the data on catch ratios derived from mesh size combinations between two slightly different mesh sizes of 12 kinds of research gillnet (namely 33, 37, 42, 48, 55, 63, 72. 76, 86, 96, 105 and 115 mm in stretched mesh size). There was an increase in the optimum length with the increase in mesh size but standard deviation showed somewhat increase with the increase in the mesh size. The selectivity curves were well fitted to the length frequency distributions obtained from samples for the mesh sizes from 48 mm through 86 mm. For the mesh sizes of 33, 37 and 42 mm the DML (Dorsal Mantle Length) compositions were distributed towards the right hand-limb of the curves. The DML distributions from the 96 mm and larger meshes showed a trend towards the left hand-limb of the curves. The selectivity curves for different mesh sizes indicate that large mesh sizes catch a greater size range of squid, and the gill net fishery in the north Pacific Ocean captures effectively neon flying squid within the range of $9\~43cm$ DML.

• 수산해양기술연구
• /
• 제49권4호
• /
• pp.360-367
• /
• 2013

The mesh selectivity of the gillnet for Pacific herring (Clupea pallasii) was examined in field experiments with four different mesh sizes (63, 69, 75 and 81mm) from June to July, 2013 in the coastal areas of Imwon in Gangwon province. The fishing performance tests were conducted with a commercial Pacific herring gillnet and a biodegradable gillnet for Pacific herring together selectivity tests. The filed tests were carried out the total 11 times. The master curve of selectivity was estimated by the extended Kitahara's method. In the results, the catch number of Pacific herring was 9,409 (2,203kg) and occupied 84.2% in total catches weight. The optimal mesh size for 50% retention on first maturity size (female, 250mm) of Pacific herring was estimated as 64.5mm by master selectivity curves. The fishing performance of the biodegradable gillnet was showed to be equivalent with commercial gill for Pacific herring.