• Health Policy and Management
• /
• v.13 no.3
• /
• pp.21-34
• /
• 2003

Patient revisit to used hospital is a key factor in determining a health care organization's competitive advantage and survival. This article examines the relationship between customer's satisfaction and his/her revisit associated with three different methods which are the Chi Square Automatic Interaction Detection(CHAID) for segmenting the outpatient group, logistic regression and neural networks for addressing the outpatient's revisit. The main findings indicate that the important factors on outpatient's revisit are physician's kindness, nurse's skill, overall level of satisfaction, hospital reputation, recommendation, level of diagnoses and outpatient's age. Among these ones, physician's kindness is the most important factor as guidelines for decision of their revisit. The decision maker of hospital should select the strategy containing the variable amount of the level of revisit and size of outpatient's group under the constraint on the hospital's time, budget and manpower given. Finally, this study shows that neural networks, as non-parametric technique, appear to more correctly predict revisit than does logistic regression as a parametric estimation technique.

• Proceedings of the KWS Conference
• /
• v.43
• /
• pp.275-277
• /
• 2004

Fictitious notch radius approach is based on the Neuter's microstructural support hypothesis which assumes that fatigue crack is governed by highly stressed volume of the material right on the weld toe area rather than the surface stress at a pin point of weld toe area. Variety of successes have been achieved in applying this methodology to the fatigue of welded joint, hence, it became one of recommended design procedure in IIW's recommendation as well as many ship classification societies. 1mm fictitious notch radius approach was applied to the various fatigue problems of welded joints in this study covering the effect of weld size, notch stress calculation for 3D geometry and low cycle fatigue problem. It was found that fictitious notch radius approach fumed out to be very effective and accurate in dealing with fatigue strength of welded joint.

• Journal of Korean Society of Water and Wastewater
• /
• v.26 no.3
• /
• pp.471-478
• /
• 2012

Where an activated sludge system needs to be converted to biological nutrient removal(BNR) system, the secondary clarifier must handle higher MLSS from bioreactor since nitrification in BNR system that requires higher SRTs than activated sludge system. Either increase the clarifier size or modification of clarifier physical structure is required to cope with MLSS surge. One of recommended structural modification is the insertion of Lamellar within clarifier. In this study, two clarifiers - one has Lamellar structure inserted and the other does not - were used to compare the effect of Lamellar in solid/liquid separation. Same MLSS was fed to both clarifiers and concentrations of MLSS were varied. With all MLSS concentrations, attachment of MLSS on Lamellar was observed and it was found that detached MLSS caused the higher effluent SS concentrations than that of non-Lamellar clarifier effluent. From these results, Lamellar should not be inserted in clarifier to handle MLSS from BNR processes and the recommendation must be withdrawn.

• Journal of National Security and Military Science
• /
• s.9
• /
• pp.283-311
• /
• 2011

The Republic of Korea, ranked as the 5th military power according to the size of its ground troops, discharges more than 200,000 manpower to the society annually; more than 13,000 of them are officers. The re-employment rate of discharged military personnels, who experience early retirement of 5 to 15 years compared to general public officers, is very low, only amounting to 53.2%. On the other hand, major developed countries exhibit great national scale of effort to take responsibility in helping the settlement of the soldiers who have dedicated their career for their countries. The re-employment rate amounts to 94%. Fully acknowledging such disparity, this paper examines various policies on discharged members support of developed countries, and aims to suggest developmental model on employment support designed for discharged members in the Republic of Korea.

• International Journal of Safety
• /
• v.7 no.1
• /
• pp.35-38
• /
• 2008

The purpose of this study is to extract typical body shape of Korean VDT workers based on the three-dimensional Korean shape data and recommendation supported by Korea Occupational Safety & Health Agency during VDT task. Desirable desk heights and chair heights for the selection of the VDT working posture is proposed by analyzing moment, compression and joint shear for lumbar and spine of Korean adult(male and female). The desirable heights for desk and chair can be selected by the least load method during VDT tasks. In the current work the figures of Korean 50th percentile offered by CATIA-HUMAN are used as the average body type of the grown-ups and this research is accomplished with the recommended size of all working attitude such as the height of a monitor except for the height of desk and chair and the degree of watching the monitor.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.06a
• /
• pp.70-71
• /
• 2005

It was an idea to develop a system to remove the contaminated hot particulate to make clean nuclear research facilities to the clear visibility for researcher. In order to clean micron and sub micron size particulates from used PFC solution as a decontamination tool. Since PFC solution is very expensive so it was a high recommendation to develop the some filtration equipment to purify PFC for next decontamination process, in additionally, reduce the secondary waste. However, we developed an easy and economic filter system to purify the PFC solution. The major advantage of the process operates in closed loop under near ambient conditions, thus minimizing the potential for fugitive TRU emissions and reduces the secondary waste. This has very significant safety and cost impacts. Here we proposed the two types PFC filter systems.

• Journal of the Korean Institute of Rural Architecture
• /
• v.17 no.3
• /
• pp.37-44
• /
• 2015

The purpose of this study is to find important factors for establishment of masterplanner operating model in residents' participation regeneration project suitable for small provincial city compared with Seoul city's which were already operated these days. The study showed the following results: 1) Conditions required for masterplanners are professional, regionality, sustainability, balance, independence. 2) Regionality and professionality can be guaranteed by expert-recommendation and perform manual suitable for character of project and regional conditions. 3) Conditions required for masterplanners are applied flexibly depending on the size and duration of project.

• Korean Journal of Materials Research
• /
• v.15 no.9
• /
• pp.560-565
• /
• 2005

The objective of this paper is to decide optimal of the slot angle to minimize stress concentration in rotating disc of diamond saw. The fracture phenomena of the slot are discussed by the theoretical and experimental approaches and then some recommendation are presented to prevent the fracture. The focus of this investigation is to evaluation the effect of the slot on stress distribution using optimum design technique and finite element method(FEM) analysis. Stress concentration of the slot with respect to the various parameter of the slot such position, size, number, rotation speed. From the experimental results, when the slot angle of diamond saw is located $8^{\circ}\~12^{\circ}$ from rotating direction, the maximum equivalent stress reduces.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.363-364
• /
• 2021

Search technology is applied to various applications using artificial intelligence technology. It is used in many ways, from identifying customer preferences to personalized recommendation systems. The purpose of this study is to develop a system for detecting adult males mainly in children's living spaces. This will prevent dangerous situations of adult intruders in advance and can be used for outsider control system. In order to develop such a system, information about clothes is used, and adult detection system is developed using various factors such as color, pattern, fashion style, and size of clothes.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.145-150
• /
• 2013

As a recent global trend, the majority of mega-size plant projects are delivered through EPC (Engineering, Procurement and Construction) contracts, where a single contract is awarded for engineering, procurement, and construction. Under this contracting mechanism, it is challenging for contractors to carry out the projects under traditional project management processes used in design-bid-build projects. A new EPC Plant, the POSCO Special Steel Plant in Changwon, was built successfully at the beginning of 2012 and it is currently in full-scale production. The project has encountered a number of major difficulties however, with some technical and managerial issues through its development process. As summarized in this paper, the authors (as project participants with the contractor) investigated it as a post construction analysis and recorded the Lessons-learned for future project management improvement.