• Food Science and Preservation
• /
• v.23 no.7
• /
• pp.939-944
• /
• 2016

The aim of this study was to establish an optimum blanching condition for outer cabbage leaves to increase utilization of the byproduct. Outer leaves of Kimchi cabbages were cut to size ($4{\times}4cm$) and blanched at 80, 90, $100^{\circ}C$ for 1, 3, and 5 min. Subsequently, weight loss, pH, total bacteria, coliform and texture properties were investigated. Sensory evaluation of a ready-to-cook soup prepared from blanched outer leaves was investigated to determine whether the quality of the blanched outer leaves was acceptable. Both weight loss and pH of outer leaves of Kimchi cabbage were increased by blanching. Compared to raw samples, total bacterial counts decreased and coliform bacteria were not detected. The hardness of raw leaf samples was $1.5kg{\cdot}force$ (N). Sample hardness was 18.7~21.7% lower after blanching for 3 min and 34.8~36.7% after blanching for 5 min. Sensory evaluation of outer leaves blanched at $100^{\circ}C$ for 5 min revealed significant differences from the other treatments (p<0.05). In addition, sensory evaluation scores for texture and appearance of outer leaves blanched at $100^{\circ}C$ for 3 min were higher than those for commercially available products. The results of this study indicate that blanching can be effective for developing a food product from the outer leaves of Kimchi cabbage.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.33 no.9
• /
• pp.1529-1536
• /
• 2004

This study was designed to determine total trans fatty acids (tFAs) content of processed foods commonly consumed in the Korean diet and to prepare the database for the estimation of tFAs intake in Koreans. Total fat and tFAs content was determined by Soxhlet extraction method and attenuated total reflection infrared spectroscopy (ATR-IR), respectively. The tFAs positional isomers were analyzed using GC/MS spectrometer. In margarines, the content of tFAs ranged from 8.27% to 28.53%. Shortenings contained higher levels of tFAs (1.98~11.33%) than lards (1.83~1.96%). The content of tFAs in grilled confectioneries was wide (7.37~26.54%). Instant popcorns contained the highest amount of tFAs. Fried chickens had 0.44 to 14.85% of tFAs and french fries had 5.18 to 27.01% of tFAs. In fried snacks (crispy) and chocolates, tFAs were not detected. The amount of tFAs per serving size was the highest in instant popcorn, followed by french fries, fried snack (tortilla), doughnuts, and grilled confectioneries. TFAs isomer of margarines was mostly C18:1${\Delta}$9t. In shortenings and lards, the most abundant positional isomer of tFAs was C18:1${\Delta}$9t and C18:2${\Delta}$9t ${\Delta}$12t. Correlation coefficient of tFAs content between IR and GC/MS method was $r^2$=0.91.

• Journal of the Korea Concrete Institute
• /
• v.18 no.5 s.95
• /
• pp.687-693
• /
• 2006

The Stone Powder Sludge(below SPS) is the by-product from the process that translates stone power of 8mm under as crushed fine aggregate. It is the sludge as like cake that has average particle size of $7{\mu}m$, absorbing water content of 20 to 60%, and $SiO_2$ content of 60% over. Because of high water content of SPS, it is not only difficult to handle, transport, and recycle, but also makes worse the economical efficiency due to high energy consuming to drying. This study is aim to recycle SPS as it is without drying. Target product is the lightweight foamed concrete that is made from the slurry mixed with pulverized mineral compounds and foams through hydro-thermal reaction of CaO and $SiO_2$. Although in the commercial lightweight foamed concrete CaO source is the cement and $SiO_2$ source is high purity silica powder with $SiO_2$ of 90%, we tried to use the SPS as $SiO_2$ source. From the experiments with factors such as foam addition rate and replacement proportion of SPS, we find that the lightweight foamed concrete with SPS shows the same trends as the density and strength of lightweight foamed concrete increases according to decrease of foam addition rate. But in the same condition, the lightweight foamed concrete with SPS is superior strength and density to that with high purity silica. This trends is distinguished according to increase of replacement proportion of SPS, also the analysis of XRF shows that the hydro thermal reaction translates SPS to tobermorite. Although SPS has low $SiO_2$ contents, the lightweight foamed concrete with SPS has superior strength and density, because it reacts well with CaO due to extremely fine particles. We conclude that it is possible to replace the high purity silica as SPS in the lightweight foamed concrete experimentally.

• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.329-334
• /
• 2007

Osmotic pellet system, which is one of the oral drug delivery systems, has been developed to improve manufacturing process, reduce product cost and other problems of osmotic tablet systems. Osmotic pellet is consisted of water swellable seed layer, drug layer, and membrane layer. Among them, the membrane layer plays an important role in a control of the drug release. In this work, we examined the effect of ratio for Eudragit RL and RS on the drug release behavior. Osmotic pellet with nifedipine as a model drug was easily obtained in a good yield by fluidized bed coater. Osmotic pellet showed round morphology with a range of size $1300{\sim}1500\;{\mu}m$. In the experiment of nifedipine release, the release amount increased with the increase of the ratio of Eudragit. This is due to the fact that Eudragit RL contains more hydrophilic quaternary ammonium group than Eudragit RS. Additionally, the release amount was retarded with increasing the membrane thickness. There are no differences in the release amount measured at the different pH 1.2, 6.5, 6.8, and 7.2. In conclusion, it was found that the drug release from osmotic pellets depended on the composition ratio and coating thickness of membrane layer.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2009.04a
• /
• pp.108-108
• /
• 2009

The main object of this research is to minimize the shock effects which frequently result in fatal damage in wind met mast on impact of barge. The collision between wind met mast and barge is generally a complex problem and it is often not practical to perform rigorous finite element analyses to include all effects and sequences during the collision. LS-dyna generally purpose explicit finite element code, which is a product of ANSYS software, is used to model and analyze the non-linear response of the met mast due to barge collision. A significant part of the collision energy is dissipated as strain energy and except for global deformation modes, the contribution from elastic straining can normally be neglected. On applying impact force of a barge to wind met mast, the maximum acceleration, internal energy and plastic strain were calculated for each load cases using the finite element method and then compare it, varying to the velocity of barge, with one varying to the thickness of rubber fender conditions. Hence, we restrict the present research mainly to the wind met mast and also parametric study has been carried out with various velocities of barge, thickness of wind met mast, thickness and Mooney-Rivlin coefficient of rubber fender with experimental data. The equation of motion of the wind met mast is derived under the assumption that it was ignored vertical movement effect of barge on sea water. Such an analyzing method which was developed so far, make it possible to determine the proper size and material properties of rubber fender and the optimal moving conditions of barge, and finally, application method can be suggested in designing process of rubber fender considering barge impact.

• Archives of design research
• /
• v.14
• /
• pp.1-7
• /
• 1996

Designers often hesitate to decide the shape, size, and layout of a product. Though ergonomic principles and data are absolutely needed in this process, they don have enough guidelines to refer. For the refrigerator designers, they also are not convinced of their decision: the vertical position of the freezing and refrigerating rooms, the height of shelves, the shape of door-handle, etc. To support the refrigerator design, we applied several ergonomic methods to the evaluation of refrigerator. EMG was measured to evaluate the load of users lumbar muscle. Based upon the experimental EMG data, we developed a model to estimate the relative load corresponding to the height of refrigerator shelves. Two different layouts of a refrigerator, R/F and F/R styles, were compared with the model. A three-dimensional motion analysis method was used to evaluate the users motion of using a refrigerator. Ten door-handles with the different shapes and positions were evaluated by tracking the rotations of the users arm. Video protocol analysis was used to evaluate the user interface of a control panel in a refrigerator. Finally, we suggested several ergonomic design guidelines based on the facts found in this research and the anthropometric data of the Korean adults. The results of this study can be applied to the ergonomic design of refrigerators

• Journal of Digital Convergence
• /
• v.15 no.12
• /
• pp.137-145
• /
• 2017

The purpose of this study is to suggest the measures to measure the shopping satisfaction and to increase the shopping satisfaction. We conducted surveys and conducted empirical analysis on Chinese tourists visiting duty free shops in Busan using direct survey method. The results of this study are as follows. First, factor analysis for subdividing the duty - free choice attribute was analyzed as store attribute, product attribute, and service attribute. Second, based on this analysis, the effect of each attribute on shopping satisfaction showed statistically significant positive results. Third, the analysis of the relative size of the effects of analytic attributes on satisfaction showed that store attributes were the highest. That is, the quality of duty-free shops, services, and products increases overall shopping satisfaction. Therefore, it can be said that the strategy implementation that improves the quality of the attributes affecting the satisfaction is expected to contribute to the improvement of the management performance, and suggests the management implications for the activation of the operation of the duty - free shop. Future studies will be more meaningful if more variety of shopping places are studied.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.10 no.16
• /
• pp.101-106
• /
• 1987

Statistical control charts are useful tools to monitor and control the manufacturing processes and are widely used in most Korean industries. Many Korean companies, however, do not always obtain desired results from the traditional control charts by Shewhart such as the $\bar{X}$-chart, $\bar{X}$-chart, $\bar{X}$-chart, etc. This is partly because the quality charterstics of the process are not distributed normally but are skewed due to the intermittent production, small lot size, etc. In Shewhart $\bar{X}$-chart. which is the most widely used one in Kora, such skewed distributions make the plots to be inclined below or above the central line or outside the control limits although no assignable causes can be found. To overcome such shortcomings in nonnormally distributed processes, a distribution-free type of confidence interval can be used, which should be based on order statistics. This thesis is concerned with the design of control chart based on a sample median which is easy to use in practical situation and therefore properties for nonnormal distributions may be easily analyzed. Control limits and central lines are given for the more famous nonnormal distributions, such as Gamma, Beta, Lognormal, Weibull, Pareto, Truncated-normal distributions. Robustness of the proposed median control chart is compared with that of the $\bar{X}$-chart; the former tends to be superior to the latter as the probability distribution of the process becomes more skewed. The average run length to detect the assignable cause is also compared when the process has a Normal or a Gamma distribution for which the properties of X are easy to verify, the proposed chart is slightly worse than the $\bar{X}$-chart for the normally distributed product but much better for Gamma-distributed products. Average Run Lengths of the other distributions are also computed. To use the proposed control chart, the probability distribution of the process should be known or estimated. If it is not possible, the results of comparison of the robustness force us to use the proposed median control chart based oh a normal distribution. To estimate the distribution of the process, Sturge's formula is used to graph the histogram and the method of probability plotting, $\chi$$^2$-goodness of fit test and Kolmogorov-Smirnov test, are discussed with real case examples. A comparison of the proposed median chart and the $\bar{X}$ chart was also performed with these examples and the median chart turned out to be superior to the $\bar{X}$-chart.

• Journal of the Korean Applied Science and Technology
• /
• v.31 no.3
• /
• pp.422-439
• /
• 2014

In this study, we measured the effects of UV protection efficiency of the polarity of oil, the type of emulsion, the viscosity of product, the type of thickener and light stabilizer in sunscreen. As a result, even higher polarity of the oil, UV protection efficiency is measured high (Butyloctyl salicylate: SPF 44.10, PA 7.93). In case of low, it was measured low conversely (Dimethicone: SPF 16.40, PA 5.57). In case of emulsion types, UV protection efficiency of W/O emulsion which organic sunscreen agent is based in the outer phase is measured higher than O/W emulsion. According to increasing of viscosity, UV protection efficiency tends to increase proportionally. However, the size of emulsion particles and the kinds of thickener has no effect to UV protection efficiency. Also light stabilizer was found to be an important factor affecting the UV protection efficiency. As a result, it is able to improve UV protection efficiency and it has potential which improve the economical effect of the sunscreen without increasing sunscreen agents.

• Journal of the Korea Convergence Society
• /
• v.13 no.3
• /
• pp.125-131
• /
• 2022

Recently, the prevalence of remotely managed patient care systems in medical institutions is increasing due to COVID-19. In particular, in the case of fluid monitoring, hospitals are considering introducing it as a system that can reduce patient safety and nurses' work. There are two products under development: a load cell method that measures weight and a method that detects drops of sap by infrared sensing. Although each product has differences in operation principle, sensor type, size, usage, and price, medical institutions are highly interested in the accuracy of the data obtained.In this study, two prototypes with different sensor methods were manufactured and the total amount of infusion per hour was measured to test the accuracy, which is the core of the infusion monitoring device. In addition, when there was an external movement, the change in the measured value of the sap was tested to evaluate the accuracy according to the measurement method. As a result of the experiment, there was a difference of less than 5% in the measurement value error of the two devices, and the load cell method showed a difference in the low-capacity measurement value and the infrared method in the high-capacity measurement value. As a result of this experiment, there was little difference in accuracy according to the sensor method of the infusion monitoring device, and it is considered that there is no problem in accuracy when used in a medical institution.