• Fire Science and Engineering
• /
• v.24 no.4
• /
• pp.98-103
• /
• 2010

The design disaster prevention of first consideration is security for the people in the buildings. However, it is difficult to make a project for considering variable cases, declined visibility of smoke, distance from another person, mentality, knowledge of clearway etc. This study purpose is, analysis variable cases and modularization of pattern movement to practice basic information for evacuation of simulation which is used RTLS (Real Time Location System) system. It is useful to sense the electric waves from the Tag and grasp the real-time position. The pattern movement of evacuation were analyzed prescription eyeglasses which is used RTLS system to consider following 3 actions; analysis of relations that declined visibility effect the decline of movement velocity, analysis rate of flow with the size of door to estimate the optimum size of door in building and analysis the pattern movement that a bottleneck situation with abundant of people passed together to these exit. The confirmed of propriety of the interpretation about the actual people to evacuate is expected applying the numerical formula in various situation.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.227-236
• /
• 2015

This study analyzed the lower body type of 30's Korean men to develop a slim-fit pants pattern. As the analysis data, direct measurement data of anthropometric measured value in the 6th Size Korea(KATS, 2010) was used as basic data with 481 men in 30's as analysis objects. The result are as follows. First, the result of analyzing factors for the lower body type classification indicated five factors. Second, the result of executing group analysis (with the independent variable of 5 clusters extracted from the factor analysis)classified the following three types. Type 1(36.8%) displayed a medium height of lower body type, small waist and hip, slim and fit body type with a slim shape between the knee and ankle. The shape between the waist and hip had characteristics of a slight curve and short length. Type 2(35.6%) displayed lowest height of a lower body type that was large and thick between the waist and the hip. The drop value of the waist and the hip was small; therefore, the body type was flat with a minimal curve. The underpart type (below the knee) was the thickest and the length was short. Type 3(27.7%) displayed the highest lower body type, a medium level waist size, flat and narrow waist and belly. This body type had a curve with big drop value of the waist and the hip, lower part from the hip to the ankle (including the knee) and a thick calf with along leg.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.4
• /
• pp.107-122
• /
• 2023

This study analyzed the style, dimensions, fabric patterns, colors, and fabrics of a traditional Chinese women's dress from the Zhou Dynasty, and reconstructed it in the form of a virtual garment using 3D CLO. Based on ancient flat image data and three-dimensional portrait data, who wore them, how they were worn, and how they were coordinated was analyzed. In order to analyze the size and pattern of the straight Ju Chines dress, data from the excavation report and the tomb owner's anthropometric measurements were combined to infer the wearing condition and organize the sculptural features. Dimensional analysis was carried out using a well-preserved small-scale woven cotton cloth as a restoration model, and the horizontal and vertical dimensions were reasonably estimated using the shape proportioning method. The analysis of the colors and patterns of the fabrics was based on the colors and patterns of the fabrics excavated from Masan Tomb No. 1 during the Eastern Zhou, Qin, and Han periods. Finally, a virtual model was created using data from the excavation report and the age and height information of the owner of the excavated robe, and the pose and size of the virtual model were determined using 3D CLO. Based on the previous research data, the garment was virtually sewn and simulated. The shape, pressure, and strain of the garment in different postures was also compared. Through the research direction of pattern and 3D restoration, this research maximizes the restoration of Chinese traditional women's dress and presents it in a more intuitive, comprehensive, and vivid way.

• Fashion & Textile Research Journal
• /
• v.20 no.3
• /
• pp.343-352
• /
• 2018

The objective of this study is to investigate the market of fitness compression wear as well as to design an optimal fitness compression wear by analyzing the muscle and movement characteristics of the elderly women in Korea. In this regard, research for functional garments is needed to increase muscle activity of elderly people during physical exercise. Firstly, we investigated the brand, design, size, material, and pattern of fitness wear based on the market survey. Secondly, we identified preference, evaluation items, evaluation method, and pattern design method based on the literature review. Finally, in addition, the motion type, range, angle to improve the muscle strength of the elderly were investigated and the maximum muscle strengths of each motion were analyzed by using 2007 Size Korea data (n = 386). It is also designed for muscle fatigue through exercise and rapid fatigue recovery after exercise. The evaluation methods for fitness compression wear were classified as motor functionality, physiological comfort, pattern and material suitability evaluations. The muscle strength at leg (pushing force) and waist (lifting force) of the ages of 60 to 69 years old showed 239.3 N and 274.5 N, respectively, which were the lowest forces compared to younger age groups. By applying these results to the design process of fitness wear, it is anticipated that the fitness wear will have a proper fit to the body shape of elderly people in South Korea as well as it can increase muscle efficiency to promote physical capability and healthy life for senior people.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.11
• /
• pp.81-87
• /
• 2022

In this paper, we propose diffraction-based sound control method to improve sound immersion in a virtual environment. The proposed technique can express the wave and flow of sound in a physical environment and a pattern similar to diffraction in real-time. Our approach determines whether there is an obstacle from the location of the sound source and then calculates the position of the new sound reflected and diffracted by the obstacle. Based on ray tracing, it determines whether or not it collides with an obstacle, and predicts the sound level of the agent behind the obstacle by using the vector reflected and refraction by the collision. In this process, the sound attenuation according to the distance/material is modeled by attenuating the size of the sound according to the number of reflected/refracted rays. As a result, the diffraction pattern expressed in the physics-based approach was expressed in real time, and it shows that the diffraction pattern also changes as the position of the obstacle is changed, thereby showing the result of naturally spreading the size of the sound. The proposed method restores the diffusion and diffraction characteristics of sound expressed in real life almost similarly.

• Ocean and Polar Research
• /
• v.26 no.2
• /
• pp.255-263
• /
• 2004

This study was conducted to investigate the community structure and distributional pattern of meiobenthos in the deep-sea bottom of the Clarion-Clipperton Fracture Zone of the northeastern Pacific during July 2003. The samples were collected using the multiple corer at 13 stations along the transects fiom $5^{\circ}N\;to\;17^{\circ}N$. The most abundant meiobenthos was nematodes and followed by sarcomastigophorans; these two taxa comprised more than 70% of the total abundance at all stations. For size distribution analyses showed that animals which fit into the sieve mesh size of 0.063mm were abundant. The maximum density of meiobenthos was $147inds./10cm^2$ at station located in $7^{\circ}N$, and the minimum density was $6 inds./10cm^2$ at station located in $14^{\circ}N$. More than 60% of meiobenthos were distributed at surface sediment layer within 1.0cm, and the peak abundance was found at $0{\sim}0.25cm$ layer. The latitudinal distribution pattern of meiobenthos in the study area seemed to be related with the primary productivity of the surface water that is also connected to the water circulation pattern of the Pacific Ocean near the Equator, diverging at latitude of $8^{\circ}N$ and conversing at $5^{\circ}N$.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.79-85
• /
• 2004

We report on a transmittance controlled photomask with phase patterns on the back quartz surface. Theoretical analysis for changes in illumination pupil shape with respect to the variation of size and density of backside phase patterns and experimental results for improvement of critical dimension uniformity on a wafer by using the transmittance controlled photomask are presented. As phase patterns for controlling transmittance of the photomask we used etched contact-hole type patterns with 180" rotative phase with respect to the unetched region. It is shown that pattern size on the backside of the photomask must be made as small as possible in order to keep the illumination pupil shape as close as possible to the original pupil shape and to achieve as large an illumination intensity drop as possible at a same pattern density. The distribution of illumination intensity drop suitable for correcting critical dimension error was realized by controlling pattern density of the contact-hole type phase patterns. We applied this transmittance controlled photomask to a critical layer of DRAM (Dynamic Random Access Memory) having a 140nm design rule and could achieve improvement of the critical dimension uniformity value from 24.0 nm to 10.7 nm in 3$\sigma$.TEX>.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.1
• /
• pp.42-50
• /
• 2016

Recently, researches about the communication between LED array and the camera (alias 'Visual-MIMO'), have been actively conducted, and the application to the vehicle and a smart phone is expected to be maximized. Since the bit error may occur if the ISI is severe in a LED array, it is necessary to switch from the multiplexing to the diversity mode. In this paper, according to the use or not of a reference array pattern, a method for determining the transition time to the diversity mode is suggested and verified. When using the reference pattern, it determines the transition time to the diversity mode from the multiplexing using the brightness information of the received image. If the reference array pattern is not used, the size of LED array compared to the entire image according to the distance is used and the size of the LED array at the distance of a severe ISI may be used for the determination of transition time to the diversity. Finally, the proposed method is verified through the simulation and hardware experiments as well as by analyzing the performance in accordance with the ISI level and the distance.

• Design & Manufacturing
• /
• v.15 no.4
• /
• pp.65-71
• /
• 2021

In the early days of laser invention, it was simply used as a measuring tool, but as lasers became more common, they became an indispensable processing tool in the industry. Short-wavelength lasers are used to make patterns on wafers used in semiconductors depending on the wavelength, such as CO2 laser, YAG laser, green laser, and UV laser. At first, the hole of the PCB board mainly used for electronic parts was not thin and the hole size was large, so a mechanical drill was used. However, in order to realize product miniaturization and high integration, small hole processing lasers have become essential, and pattern exposure for small hole sizes has become essential. This paper intends to analyze the characteristics through patterns by exposing the PCB substrate through DMD and polygon scanner, which are different optical systems. Since the optical systems are different, the size of the patterns was made the same, and exposure was performed under the optimal conditions for each system. Pattern characteristics were analyzed through a 3D profiler. As a result of the analysis, there was no significant difference in line width between the two systems. However, it was confirmed that dmd had better pattern precision and polygon scanner had better productivity.

• Clinics in Shoulder and Elbow
• /
• v.24 no.3
• /
• pp.135-140
• /
• 2021

Background: We hypothesized in this study that the characteristics of retear cases vary according to surgeon volume and that surgical outcomes differ between primary and revision arthroscopic rotator cuff repair (revisional ARCR). Methods: Surgeons performing more than 12 rotator cuff repairs (RCRs) per year were defined as high-volume surgeons, and those performing fewer than 12 RCRs were considered low-volume surgeons. Of the 47 patients who underwent revisional ARCR at our clinic enrolled in this study, 21 cases were treated by high-volume surgeons and 26 cases by low-volume surgeons. In all cases, the interval between primary surgery and revisional ARCR, degree of "acromial scuffing," number of anchors, RCR technique, retear pattern, fatty infiltration, retear size, operating time, and clinical outcome were recorded. Results: During primary surgery, significantly more lateral anchors (p=0.004) were used, and the rate of use of the double-row repair technique was significantly higher (p<0.001) in the high- versus low-volume surgeon group. Moreover, the "cut-through pattern" was observed significantly more frequently among the cases treated by high- versus low-volume surgeons (p=0.008). The clinical outcomes after revisional ARCR were not different between the two groups. Conclusions: Double-row repair during primary surgery and the cut-through pattern during revisional ARCR were more frequent in the high- versus low-volume surgeon groups. However, no differences in retear site or size, fatty infiltration grade, or outcomes were observed between the groups.