• Journal of Powder Materials
• /
• v.9 no.3
• /
• pp.174-181
• /
• 2002

Nanosized tungsten carbide powders were synthesized by the chemical vapor condensation(CVC) process using the pyrolysis of tungsten hexacarbonyl($W(CO)_6$). The effect of CVC parameters on the formation and the microstructural change of as-prepared powders were studied by XRD, BET and TEM. The loosely agglomerated nanosized tungsten-carbide($WC_{1-x}$) particles having the smooth rounded tetragonal shape could be obtained below $1000^{\circ}C$ in argon and air atmosphere respectively. The grain size of powders was decreased from 53 nm to 28 nm with increasing reaction temperature. The increase of particle size with reaction temperature represented that the condensation of precursor vapor dominated the powder formation in CVC reactor. The powder prepared at $1000^{\circ}C$ was consisted of the pure W and cubic tungsten-carbide ($WC_{1-x}$), and their surfaces had irregular shape because the pure W was formed on the $WC_{1-x}$ powders. The $WC_{1-x}$ and W powders having the average particles size of about 5 nm were produced in vacuum.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.17 no.6
• /
• pp.177-185
• /
• 2018

There is a need to study dust separator screens with good drainage efficiency while effectively filtering suspended solids and other contaminants entering the intake pumping station, the drainage pumping station and the mediation pumping station, the cooling water inlet of the power plant, and the like. In this paper, Numerical studies were conducted for the optimal design of the dust separator screen using the Coanda effect. The shape of the dust separator screen is important, such as the right curvature radius $R_1$ at the top of the dust separator screen and the left curvature radius $R_2$ at the top, h is the height difference and shape between the screen and the accelerating plate, and ${\theta}$ is the inclination angle of the screen. A total of 4 shape factors were set and the effects of Coanda and drainage performance of each element were compared and analyzed, the optimum length and size of each shape element were derived by classifying the shape elements into direct and indirect influences. Finally, it was possible to effectively filter foreign matter by narrowing the screen spacing, and the drainage performance was analyzed and optimized through numerical studies of dust separator screen.

• International Journal of Advanced Culture Technology
• /
• v.10 no.3
• /
• pp.295-306
• /
• 2022

The NOx removal performance of the SCR process depends on various factors such as catalytic factors (catalyst composition, shape, space velocity, etc.), temperature and flow rate distribution of the exhaust gas. Among them, the uniformity of the flow flowing into the catalyst bed plays the most important role. In this study, the flow characteristics in the SCR reactor in the design stage were simulated using a three-dimensional numerical analysis technique to confirm the uniformity of the airflow. Due to the limitation of the installation space, the shape of the inlet duct was compared with the two types of inlet duct shape because there were many curved sections of the inlet duct and the duct size margin was not large. The effect of inlet duct shape, guide vane or mixer installation, and venturi shape change on SCR reactor internal flow, airflow uniformity, and space utilization rate of ammonia concentration were studied. It was found that the uniformity of the airflow reaching the catalyst layer was greatly improved when an inlet duct with a shape that could suppress drift was applied and guide vanes were installed in the curved part of the inlet duct to properly distribute the process gas. In addition, the space utilization rate was greatly improved when the duct at the rear of the nozzle was applied as a venturi type rather than a mixer for uniform distribution of ammonia gas.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.4
• /
• pp.64-72
• /
• 1993

Analytical models for the prediction of the size of hardened zone in laser surface hardening are presented. The models are based on the solutions to the problem of three-dimensional heat flow in plates with infinite thickness. The validity of the model was tested on medium carbon steel for Gaussian mode of beam. Then the model for rectagular beam was used for the predicition of the size of hardened zone on various hardening process parameters. From the calculation results it appeared that the size and shape of the hardened zone are strongly dependent on process parameters such as beam mode, beam size, and traverse speed.

• Imaging Science in Dentistry
• /
• v.31 no.2
• /
• pp.85-91
• /
• 2001

Purpose: To evaluate the effect of the slice thickness and the size of region of interest (ROI) on CT number using quantitative CT phantom Materials and Methods: The phantom containing 150 mg/cc, 75 mg/cc and 0 mg/cc calcium hydroxyapatite was scanned with 1, 3, 5 and 10 mm slice thicknesses by single energy quantitative computed tomography (QCT). CT numbers were measured on center position of the phantom. Shape of ROI was circular and sizes were 1, 3, 5, 11, 16, 21, 26 and 33 mm². ANOVA and Tukey's multiple comparison method were performed for statistical comparison of CT numbers according to different slice thicknesses. Coefficient of variation of CT number measured in each size of ROI was evaluated in same slice thickness. Results : CT numbers had statistically significant difference according to slice thicknesses (p<0.05). As the slice thickness increased, CT number also increased. As the density of phantom became lower and the size of ROI became smaller, the coefficient of variation of CT number increased. When the size of ROI was more than 11 mm² in 1 mm slice thickness, 5 mm² in 3 mm slice thickness and 3 mm² in 5 mm slice thickness, the coefficient of variation became consistent. In 10 mm slice thickness, the size of ROI had little effect on the coefficient of variation. Conclusion: CT number had variation according to the slice thickness and the size of ROI although the object was homogeneous. The slice thickness and the size of ROI are critical factors in precision of the CT number measurements.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.37 no.2
• /
• pp.109-116
• /
• 2018

We investigated the effects of honey bee (Apis mellifera L.) colony size on the pollination of greenhouse-cultivated watermelon grown under the forcing cultivation system. The highest pollination activity of bees was observed ($14.3{\pm}5.0$ honey bees/day) when the bee colony size was 10,000 followed by 7,500 and 5,000 honey bees. There was a positive correlation between the bee colony size and pollination activity (R = 0.262) but insignificant difference in fruit set with different honey bee colony sizes (88%-91%). Evaluation of physical properties revealed that the weight and shape of watermelon were also not significantly different among different colony sizes. However, larger the bee colony size, higher the number of seeds were fertilized and rate of seed fertilization (p > 0.05). Number of seeds and content of sugar were negatively correlated (R = -0.714). Fertilized seeds showed a significant increase in mealy flesh, which has a negative effect on fruit quality, compared with that of the unfertilized seeds. Overall, we found that a colony size of 5,000 honey bees was the most effective for the pollination of watermelon grown under forcing cultivation. A comparison of the effects of bee pollination with those of artificial pollination suggested that artificial pollination can be effectively replaced by bee pollination in the forcing cultivation of watermelon, because fruit set, weight, and shape by bee pollination were similar to those achieved by artificial pollination.

• Journal of Korea Foundry Society
• /
• v.5 no.2
• /
• pp.109-117
• /
• 1985

A two dimensional analysis of the solidification phenomena has been simulated by IAD (Implicit Alternating Direction)method for L-shaped castings with external chills. The effect of chills has been studied with the variation of chill size, shape, and their materials, and also with the variation of the pouring temperature. Three kinds of cross-sectional shapes of chills such as triangle, square, and L-shape were chosen, and graphite, cast iron, and copper for their materials. It has been shown by the computation that the hot spot at the junction of L-shaped castings can not be removed by external chills, and that the distance between the inner corner and the hot spot on the line of symmetry, as well as the solidification time of castings depend only on VHC (Volumetric Heat Capacity).

• Composites Research
• /
• v.23 no.1
• /
• pp.23-30
• /
• 2010

Most of the bridge systems, including the girders, cross-beams, and concrete decks behave as specially orthotropic plates. In general, the analytical solution for such complex system is very difficult to obtain. In this paper presented, a design method of slab bridge of simple supported made by composite materials. For the design of bridge made by the composite materials, cross-section was used the form-core shape because of this shape is economical and profitable, and for output of the stress value used finite difference method. In this paper, the rate of tensile strength reduction due to increased size was considered. Strength-failure analysis procedure, using the reduced tensile strength, was presented. And also numerical study was made for these cases.

• The Korean Journal of Ecology
• /
• v.22 no.2
• /
• pp.69-77
• /
• 1999

Secondary vegetation. the holistically integrated system of nature and human being, is the complicated ecosystem that is composed of natural and man-created factors. Understanding the ecological function of secondary vegetation supplies us many important informations for sustainable landscape management and ecological restoration planning. In this research, we tried to examine the shape effect of vegetation patch on early structure of populations of pine and oaks. Moreover. we also tried to clarify the ecological functions of patch edge by exploring the patch effect on germination using patch index. In addition, we present the landscape structure of man -made vegetation of our study area, and setting experimental design of research. Vegetation landscape of study area is typical human disturbed landscape mainly composed of disturbance patches. Vegetation types of graveyard and managed pine forest were controlled by periodically repeated management. However, current seedlings of pine occurred well at both vegetation types. Presence of both saplings were more controlled in managed pine forest (PDM) and graveyard (G) than those of undergrowth (PD) and forest edge (FE) with canopy trees. The number of pine seedlings increased with patch size and patch perimeter. That of oak seedlings was, however, not significantly different. Larger graveyards provided higher light availability for germination of pine seedlings. We think, however, most seedlings of both species in the large sized graveyards without shade will die more easily than that of small sized ones before rainy summer. Relationships between patch shape and germination of two woody species cannot be exactly explained enough yet in these results. More informations on spatial interaction of the total species with differently sized patches are necessary to solve the concept of patch effect on species colonization.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.12 s.243
• /
• pp.1307-1312
• /
• 2005

Turbulent in-situ mixing process is a new material process technology to get dispersed phase in nanometer size by controlling reaction of liquid/liquid, liquid/solid and liquid/gas, flow and solidification speed simultaneously. In this study mixing, the key technology to this synthesis method will be studied by computational fluid dynamics. For the simulation of mixing of liquid metal, static mixers will be investigated. Two inlets for different liquid metal meet and merge like 'Y' shape tube. The tube has various shapes such as straight and curved. Also, the radius of curve will be varied. The performance of mixer will be evaluated with quantitative analysis with coefficient of variance of mass fraction. Also, detailed plots of intersection will be presented to understand effect of mixer shape on mixing.