• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2004년도 춘계공동학술대회 논문집
• /
• pp.119-126
• /
• 2004

Location management is very important issue in wireless communication system to trace mobile users' exact location. In this study, we propose a dynamic location area management scheme which determines the size of dynamic location area considering each user's characteristic. In determining the optimal location area size, we consider the measurement data as well as the historical data, which contains call arrival rate and average speed of each mobile user. In this mixture of data, the weight of historical data is derived by linear searching method which guarantees the minimal cost of location management. We also introduce the regularity index which can be calculated by using the autocorrelation of historical data itself. Statistical validation shows that the regularity index is the same as the weight of measurement data. As a result, the regularity index is utilized to incorporate the historical data into the measurement data. By applying the proposed scheme, the location management cost is shown to decrease. Numerical examples illustrate such an aspect of the proposed scheme.

• Structural Monitoring and Maintenance
• /
• 제4권1호
• /
• pp.69-84
• /
• 2017

Delamination is the most common failure mode in layered composite materials. The author have found that the electrical potential change (EPC) technique using response surfaces method is very effective in assessment delamination in basalt fiber reinforced polymer (FRP) laminate composite pipe by using electrical capacitance sensor (ECS). In the present study, the effect of the electrodes number on the method is investigated using FEM analyses for delamination location/size detection by ANSYS and MATLAB, which are combined to simulate sensor characteristic. Three cases of electrodes number are analyzed here are eight, twelve and sixteen electrodes, afterwards, the delamination is introduced into between the three layers [$0^{\circ}/90^{\circ}/0^{\circ}$]s laminates pipe, split into eight, twelve and sixteen scenarios for cases of eight, twelve and sixteen electrodes respectively. Response surfaces are adopted as a tool for solving inverse problems to estimate delamination location/size from the measured EPC of all segments between electrodes. As a result, it was revealed that the estimation performances of delamination location/size depends on the electrodes number. For ECS, the high number of electrodes is required to obtain high estimation performances of delamination location/size. The illustrated results are in excellent agreement with solutions available in the literature, thus validating the accuracy and reliability of the proposed technique.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.357-360
• /
• 2007

An asset tracking using wireless sensor network is concerned with geographical locations of sensor nodes. The limited size of sensor nodes makes them attractable for tracking service, at the same time their size causes power restrictions, limited computation power, and storage restrictions. Due to such constrained capabilities, the wireless sensor network basically assumes the failure of sensor nodes. This causes a set of concerns in designing asset tracking system on wireless sensor network and one of the most critical factors is location uncertainty of sensor nodes. In this paper, we classify the location uncertainty problem in asset tracking system into following cases. First, sensor node isn't read at all because of sensor node failure, leading to misunderstanding that asset is not present. Second, incorrect location is read due to interference of RSSI, providing unreliable location of asset. We implemented and installed our asset tracking system in a real environment and continuously monitored the status of asset and measured error rate of location of sensor nodes. We present experimental results that demonstrate the location uncertainty problem in asset tracking system using wireless sensor network.

• 산업공학
• /
• 제18권4호
• /
• pp.382-389
• /
• 2005

Location management is very important issue in wireless communication system to trace mobile users' exact location. In this study, we propose a dynamic location area management scheme which determines the size of dynamic location area considering each user's characteristics. In determining the optimal location area size, we consider the measurement data as well as the historical data, which contains call arrival rate and average speed of each mobile user. In this mixture of data, the weight of historical data is derived by linear searching method which guarantees the minimal cost of location management. We also introduce the regularity index which can be calculated by using the autocorrelation of historical data itself. Statistical validation shows that the regularity index is the same as the weight of measurement data. As a result, the regularity index is utilized to incorporate the historical data into the measurement data. By applying the proposed scheme, the location management cost is shown to decrease. Numerical examples illustrate such an aspect of the proposed scheme.

• 한국공작기계학회논문집
• /
• 제13권5호
• /
• pp.87-95
• /
• 2004

From the results of AE(Acoustic Emission) source location occurred by the spot exciting as suggested in this research, it has been confirmed that AE technique is quite fruitful in figuring out the location of the occurrence, form, size and direction of the defects. As the results of examining the distribution of event for the angle of crack $\alpha$ to Xs and Ys, as the increases from $0^{\circ}$ ~ $90^{\circ}$, gradually changes its width from the axis Xs to the axis Ys. So event appears approximately similar in its size at the angle of crack $\alpha$=$45^{\circ}$, yet opposite when $\alpha$ is lager. It is believed that this is a phenomenon where its crack legnth $\alpha$, assumed as a planar defect, is to be prcjected toward the direction with a larger size. Thus, it is expected that the application of the experimental method suggested in this study would make it possible to identify the location of the defect in the material in the nondestructive way.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1999년도 하계종합학술대회 논문집
• /
• pp.25-28
• /
• 1999

Consider connection-oriented wireless cellular net-works. To establish a circuit or virtual circuit in such a network, a paging message is broadcast over a region at which the destined mobile station is presumed to reside, (identified as a paging area). For an effective paging mechanism, it is desirable to provide the location information of mobile stations to the network. In this paper, we consider a mobile controlled location update scheme under which each mobile station periodically reports its current location information to the network by using an inherent timer (without measuring the power of signals transmitted from base stations). Based on the latest information about a mobile station's location, a paging area is selected to page the mobile station. Note that under this scheme, a mobile station may not yet have reported its location change while sojourning out of the current paging area. In such situation, the mobile station can not receive a paging message destined to it. Frequent location updates can reduce the paging failure rate incurred by mobile stations'sojourning out of the paging area. However, larger bandwidth is needed for location update as the location update rate is increased. On the other hand, as the size of the paging area is increased, the paging failure rate is decreased, while larger bandwidth is required for paging. Thus, we first present a model for mobility, paging and location update processes, and secondly investigate the effect of network parameters on the paging failure rate and the amount of bandwidth used for paging and location update. Finally, we formulate problems to find proper values for the location update rate and paging area size under the constraints on the bandwidth usage levels for location update and paging.

• 대한수학회논문집
• /
• 제16권3호
• /
• pp.459-485
• /
• 2001

The aim of EIT (electrical impedance tomography) system is to image cross-section conductivity distribution of a human body by means of both generating and sensing electrodes attached on to the surface of the body, where currents are injected and voltages are measured. EIT has been suffered from the severe ill-posedness which is caused by the inherent low sensitivity of boundary measurements to any changes of internal tissue conductivity values. With a limited set of current-to-voltage data, figuring out full structure of the conductivity distribution could be extremely difficult at present time, so it could be worthwhile to extract some necessary partial information of the internal conductivity. We try to extract some key patterns of current-to-voltage data that furnish some core information on the conductivity distribution such s location and size. This overview provides our recent observation on the location search and the size estimation.

• 대한산업공학회지
• /
• 제16권2호
• /
• pp.99-107
• /
• 1990

Many accidents related to robot operation occur during the robot teaching process. This paper deals with recommendations for the teach pendant design parameters to enhance safety and performances in human-robot interactions. In order to investigate the optimum location and the size of the emergency stop button on the teach pendant, an experiment was conducted with a simulated teach pendant which can accomodate four different locations and three sizes of the button. Under a simulated emergency condition, the reach time to the emergency stop button was measured at random combination of the location and the size of button. The reach time was significantly affected by the location and the size of the emergency stop button. The fastest average reach time was attained with 1.5 inch-diameter button on the upper center of the teach pendant.

• The Korean Journal of Pain
• /
• 제7권2호
• /
• pp.170-174
• /
• 1994

Stellate Ganglion (SG) of l0 cadavers were removed during autopsy at Saga Medical College. Length, width, thickness, shape and location of SG were measured before formalin fixation. The results are as follows; 1) Length, width, thickness of SG were 22.33+5.23mm, 9.34+2.23mm and 5.03+1.19mm in right respectively, and 29.67+10.56 mm, 11.29+3.20mm and 5.51+1.09mm respectively in left. 2) Weight of right SG is 0.69+0.25 gm and weight of left SG is 1.04+0.63 gm. 3) Shape of SG is oval and snowman type. 4) Location of SG is variably located from the base of 7th cervical vertebra to first thoracic vertebra.

• 복식문화연구
• /
• 제9권1호
• /
• pp.11-18
• /
• 2001

The purpose of this study is to survey women′s poor breast shapes depending on their ages and breast types, and thereupon, analyze the differences and correlations among them, and thereby, provide for some basic data useful to the development of the comfortable brassiere which can serve to correct the poor breast. 1. As a result of categorizing the types of schematic breast sides, "type 1" was characterized by medium lower part, greatest pro trusion of breast itself, volumed upper part and visible breast outside, while "type 2" be characterized by medium lower part, most flatness, poor upper part, smallest outside size and medium outside, and "type 3" was characterized by least poor lower part, medium protrusion of breast, poor upper part, medium outside size , and "type 4" was characterized by poorest lower part, medium protrusion of breast, poor upper part, medium outside size and poorest outside. 2. The breast locations could be categorized depending on brest side types; "type 1" a higher location of breast than the other types, "type 2"had a lower location of breast except for the nipples thant the other types, "type 3" had the lowest location of breast and "type 4" had a comparatively low location of breast but had the highest nipples.