• Journal of Applied Biological Chemistry
• /
• 제58권2호
• /
• pp.113-116
• /
• 2015

Silver materials may be toxic in humans because they can enter the body and accumulate, typically in the lungs. We hypothesized that the cytotoxicity of naive silver materials is affected by their size and shape. Our in vitro assays revealed that the overall toxicity was in the following order: submicro-particles>wires>micro-particles. These results contrast with previous studies, which showed that silver wires are the most toxic among the three tested materials, possibly due to differences in cell lines. Evaluations of in vivo pulmonary toxicity revealed eryptosis in the cavity lining of the lung sections. The observed eryptosis was consistent with the in vitro results. Our results indicate that silver materialinduced cytotoxicity must be measured and compared using various methods.

• Journal of the Optical Society of Korea
• /
• 제19권6호
• /
• pp.619-628
• /
• 2015

In this paper, we consider a method for estimating a stripe-type defect and the reconstruction of a defect-free L/S type mask used in lithography. Comparing diffraction patterns of defected and defect-free masks, we derive equations for the estimation of the location and size of the defect. We construct an analytical model for this problem and derive closed form equations to determine the location and size using phase retrieval problem solving techniques. Consequently, we develop an algorithm that determines a defect-free mask pattern. An example shows the validity of the equations.

• 한국군사과학기술학회지
• /
• 제18권4호
• /
• pp.415-422
• /
• 2015

The flow field structures of dual jet-in-cross-flow were examined experimentally for in-lined perforated damage holes configuration using particle image velocimetry. Ensemble averaged in-plane velocity and vorticity data in the jet were determined to study the mean jet structure. Jets are formed by pressure differences between upper and lower airfoil surface. The flow structure of vicinity of the thru holes consist of a vortical structure that wrap around the jets like a horseshoe and develop further downstream through a pair of stream-wise vortices. The shape, size and location of the horseshoe vortex were found to be dependent on the angle of attack. In spite of the existence of battle damage holes, the effect on the control force was insignificant when the damage size was not large enough.

• 펄프종이기술
• /
• 제47권2호
• /
• pp.53-60
• /
• 2015

The effects of stirring speed during filler modification by dual polymers on flocculation and reflocculation of PCC (precipitated calcium carbonate) particles and its effect on handsheet properties were elucidated. PCC surface was modified by adsorbing A-PAM (anionic polyacrylamide) and C-starch (cationic starch) in series at various stirring speeds. It was found that increasing stirring speed during filler modification decreased the initial floc size of PCC. Continuous stirring with the same speed for filler modification resulted in the decrease of a floc size, eventually reached a steady state. The variations in a floc size was influenced by the stirring speed during filler modification: the lower the stirring speed during filler modification, the larger the floc size variations. Conclusively, the stability of PCC floc could be improved by increasing the stirring speed. In addition, the stirring speed influenced the handsheet properties. The smaller the PCC floc, the lower the strength of handseet. However, too much larger floc size also deteriorated paper strength. There exists an optimum floc size in term of paper strength which shall be controlled by stirring speed during filler modification.

• 한국임상보건과학회지
• /
• 제3권3호
• /
• pp.427-434
• /
• 2015

Purpose: This study was to investigate the relationship between the palpebral fissure and the exophthalmos in an elder women population in Korea subjects with normal eye status. Methods. From November 2014 to July 2015, The author analyzed the morphological values in 81 Korean elder women population. The clinical test was performed using the Hertel exophthalometer and verner califer. Analysis of data were described using the spss 20 and Pearson's test. Results. The mean age of the 81 subjects (162 eyes) was (73.938+/8.585)mm. The mean value of palpebral fissure was (5.673+/-2.065)mm in width and (24.179+/-4.409)mm in height. The mean value of exophthalmos was (5.537+/-2.151)mm. There were a significant relationship(P>0.01) in the mean size between the width and height in palpebral fissure. Also, there were a significant relationship(P>0.01) in the mean size between the palpebral fissure width and exophthalmos. Also, there were a significant relationship(P>0.01) in the mean size between the palpebral height width and exophthalmos. However, there were not significant relationship(P>0.01) in the mean size between the palpebral fissure width and exophthalmos in right eye. On the other hand, The relationship between right eye and left eye of the palpebral fissure and exophthalmos was similar results. Conclusions. In this study, these results suggested that the palpebral fissure and exophthalmos was a significant relationship in the mean value of morphologic characters in Korean elder women population.

• 한국어류학회지
• /
• 제32권1호
• /
• pp.8-13
• /
• 2020

줄삼치(Sarda orientalis)는 2015년 1월부터 12월까지 제주 주변해역에서 고등어 선망어선에 혼획된 288개체를 이용하였으며, 가랑이체장(fork length)과 체중을 각각 0.1 cm와 0.1 g까지 측정한 뒤 해부하여 먹이생물의 크기와 무게를 측정하고 최대한 종 수준까지 분석하였다. 먹이생물은 상대중요성지수비(%IRI)를 이용해 분석하였으며, 크기군과 계절에 따른 먹이조성 변화를 알아보았다. 줄삼치의 가장 중요한 먹이생물은 어류(Pisces)였으며, 그중에서도 멸치(Engraulis japonicus)가 가장 높은 비율을 보였다. 그 외 난바다곤쟁이류(Euphausiacea), 단각류(Amphipoda), 두족류(Cephalopoda)가 출현하였으나 그 양은 적었다. 줄삼치는 모든 크기군과 계절에서 어류가 가장 중요한 먹이생물이었으며, 성장하면서 먹이생물의 중량이 증가하였다.

• 한국어류학회지
• /
• 제28권2호
• /
• pp.87-92
• /
• 2016

본 연구는 2014년 4월~2015년 3월까지 순천시 벌교읍 호동리의 개펄 조간대에서 출현하는 짱뚱어 Boleophthalmus pectinirostris 198개체를 대상으로 식성을 조사하였다. 짱뚱어의 전장은 6.5~18.7 cm의 범위를 보였다. 짱뚱어는 규조류를 주로 섭식하는 초식성이었다. 와편모조류, 선형동물 등도 섭식하였지만 그 양은 적었다. 짱뚱어는 모든 크기군과 계절에서 규조류 (주로 Pleurosigma spp., Navicula spp., Nitzschia spp., Gyrosigma spp.)를 많이 섭식하였다.

• 한국의상디자인학회지
• /
• 제23권2호
• /
• pp.133-146
• /
• 2021

It is important to conduct an anthropometric study to develop garment patterns to accommodate the changes found in the body size and type of men in their 30s, to effectively address fit dissatisfaction. Thus, this study aims to explore changes in the lower body sizes and body types of men in their 30s, and provide basic measurements for designing pants patterns. For this purpose, key anthropometric dimensions for the lower body of men in their 30s, which were acquired by the 6th (2010) and 7th (2015) survey conducted by Size Korea, were analyzed using SPSS 24.0 for Windows. Independent sample t-tests were conducted on major lower body sizes to track changes over time. Factor and cluster analyses were used to classify lower body types. From the comparison of the 6th (2010) and 7th (2015) surveys, it was found that the overall lower body size of men in their 30s were increasing in the height-related aspects, circumference, thickness, and width-as well as body weight and BMI. The five factors were derived to determine the typical lower body types of men in their 30s and the body types were classified into three categories through cluster analysis: (1) those with the largest body size, body volume, and obesity, (2) those with smallest body size, lower body volume, and obesity degree, visually the most skinny type, (3) those with BMI and weight that are the smallest, like Type 2, but the main circumference of the lower body is lower. In order to visually look at the statistical analysis, results were presented by producing a avatar based on the main lower body values.

• 한국정밀공학회지
• /
• 제32권10호
• /
• pp.911-916
• /
• 2015

In the nano/micro scale, material properties are dependent on the size-scale of a structure. However, conventional micro-scale tensile tests have limitations to obtain reliable values of nano-scale material properties owing to residual stress and elastic slippage in the gripping/aligning process. The indenter-driven nano-scale tensile test provides prominent advantages simple testing device, high-quality nano-scale metallic specimen with negligible residual stress. In this paper, two-types of specimens (a specimen with multi-testing parts and a specimen with a single-testing part) are discussed. Focused ion beam (FIB) is employed to fabricate a nano-scale specimen from a thin nickel film. Using the specimen with a single-testing part, we obtained a nano-scale stress-strain curve of electroplated nickel film.

• 한국군사과학기술학회지
• /
• 제18권2호
• /
• pp.154-159
• /
• 2015

This paper deals with the effect of concrete target size on penetration of projectiles. We investigated the penetration depth and residual velocity of projectiles using the 2-D axial symmetric model. Most analysis were conducted with 13 kg projectile (striking velocity: 456.4 m/s) and concrete target with compressive strength of 39 MPa. This paper provided penetration depth (or residual velocity) versus ratio D/d (target diameter, D and projectile diameter, d). When the bottom of concrete cylinder was constrained, penetration depth converged to limit depth more than the ratio D/d of 36. The residual velocity of projectile with thin concrete target were investigated. The residual velocity was converged to specific velocity more than the ratio D/d of 16.