• 한국해양공학회지
• /
• 제10권4호
• /
• pp.84-91
• /
• 1996

A fractal analysis on fracture surface of aluminium-particulate SiC composites was attempted. As the volume fraction of SiC in composites increases, the fractal dimension tends to increase. However, no correlation between the fractal dimension and the fracture toughness in terms of critical energy release rate was observed. Since the fractal dimension represents the roughness of fracture surface, the fracture toughness would be a function of not only fracture surface roughness but also additional parameters. Thus the applicability of fractal analysis to the estimation of fracture toughness must depend on the proper choice and interpretation of additioal paramerters. In this paper, the size of characteristic strctural unit for fracture was considered as an additional parameter. As a result, the size appeared to be a function of only volume fraction of SiC. Finally, a master curve for fracture toughness of aluminium-particulate SiC composites was proposed as a function of fractal dimension and volume fraction of SiC.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 영호남 합동 학술대회 및 춘계학술대회 논문집 센서 박막 기술교육
• /
• pp.149-151
• /
• 2006

The surface properties of electrical devices studied by fractal phenomenon were investigated. The SEM photographs of devices surface were changed by binary code and it were analyzed by fractal dimension. The void of devices surface was found by fractal program. The relation between grain density and electrical properties are able to expect to fractal dimension. The grain size in varistors surface was decreased by increasing of oxide antimony addition. The fractal dimension and electrical properties of devices surface was related to between grain boundary and grain density. The grain size was decreased by increasing of fractal dimensions.

• 한국주거학회논문집
• /
• 제19권6호
• /
• pp.1-8
• /
• 2008

A fitness facility in an apartment complex is not a simple sports facility. It has important roles in improving the residents' physical and mental health, and in forming a sense of community. This study analyzed the number of users in the fitness facility of the apartment complex, which is a significant criterion in determining the dimension. A comparative analysis between the past and the present function and dimension was performed in finding out the optimal solutions. In conclusion, the number of users in the fitness facility is influenced not by the number of households in the complex but by the facility's size and creating a desired environment. The users' favorite sports equipments were figured out to meet those needs. Moreover, comparing the facilities' size, user satisfaction, area per person, an optimal dimension for the facility, and rates of equipments were found out.

• 한국물환경학회지
• /
• 제26권2호
• /
• pp.343-348
• /
• 2010

The objective of this study was to investigate the effects of starvation periods with aerobic or non-aerobic conditions on the organic removal efficiencies and physical characteristics of activated sludge for treating saline and non-saline wastewater. During the experiment, MLSS, MLVSS, sludge volume index (SVI), floc size and fractal dimension, $COD_{Mn}$ removal efficiencies were monitored. The reductions of MLSS, MLVSS and SVI with maintaining the sludge under a non-aerobic condition during starvation periods were smaller than those under a aerobic condition. Floc size, fractal dimension and $COD_{Mn}$ removal efficiencies were less decreased under non-aerobic condition than under aerobic condition. And SVI were strongly correlated with floc size and fractal dimension. Consequently, the result showed that maintaining the activated sludge under non-aerobic starvation conditions was better strategy than that under aerobic starvation conditions as it adapted and resisted to starvation.

• 대한환경공학회지
• /
• 제32권3호
• /
• pp.234-240
• /
• 2010

SBR시스템을 이용한 비염분 폐수와 염분 폐수의 생물학적 처리 시 starvation이전 제올라이트 및 입상활성탄 주입이 starvation 이후 시스템의 재가동시 시스템의 성능회복에 대해 조사하였다. Starvation 이후 시스템의 재가동시, SVI, floc의 크기, fractal dimension, 유기물 지표인 $COD_{Mn}$과 T-N, T-P의 처리효율에 미치는 영향을 알아보고 회복 기간을 도출하고자 하였다. 5일 동안 starvation 후 재가동하였을 때에 초기의 SVI는 증가하였으나 시간이 경과함에 따라 감소하였다. 또한 floc 크기 및 fractal dimension이 클수록, 유기물, T-N 및 T-P 처리효율도 증가하였다. 시스템의 성능회복은 floc 크기 및 fractal dimension에 상관성을 가지고 있었다. Starvation 이후 재가동시 오염물질($COD_{Mn}$, T-N, T-P) 처리효율이 정상상태로 회복하는데 필요한 시간은 담체 주입이 미주입보다 더 짧은 시간이 소요되었다.

• 한국정보과학회논문지:시스템및이론
• /
• 제27권2호
• /
• pp.169-176
• /
• 2000

본 논문에서는 령크 충돌을 최소화 하는데 중점을 두고 순위차원 라우팅을 사용하여 완전이진트리를 3차원 메쉬로 임베딩하는 방법을 제안한다. 기존의 연구[14]에서는, 완전이진트리를 3차원 메쉬에 임베딩 할 때 순위차원 라우팅을 사용하는 경우 1, 2 차원에서 링크 충돌이 발생하였고, 순위차원 라우팅을 따르지 않는 경우 1차원에서만 링크 충돌이 존재하도록 하는 임베딩 방법을 보였었다. 이와 비교하여 본 논문에서는 순위차원 라우팅을 사용하고 링크 충돌이 존재하지 않는 임베딩 방법을 제안하며, 이 방법에 의해 임베딩을 수행한 결과, 임베딩을 위해 사용된 메쉬의 크기가 최적크기의 1.27 배를 넘지 않음을 증명한다.

• 한국주거학회논문집
• /
• 제14권5호
• /
• pp.105-116
• /
• 2003

The purpose of this study is to suggest the method of prevention of staircase accidents, and to make housing environment better through researching the dimension of a housing staircase for Korean. The scope and method of this thesis is to investigate the dimension limits of a staircase (slope, minimum width of tread, maximum height of riser), and to analyze the characteristics of foot condition (jutting rate, foot angle, ball joint, nosing clearance, clearance distance) using the experiment which takes a photograph of foot motion during walking stairs. The results of this thesis are as follows. The slope of a staircase in house is $32.3^{\circ}$$^{\circ}$-$42.1^{\circ}$$^{\circ}$. The riser should be less than 190 mm. The minimum size of tread is 210 mm and proper size is 270 mm.

• 대한치과교정학회지
• /
• 제18권1호
• /
• pp.217-225
• /
• 1988

This study was undertaken to examine relationship between tooth size and arch dimension in dental crowding. Two groups of dental casts were selected on the basis of dental crowding. One group, consisting of 51 pairs of dental casts (24 male and 27 female), exhibited remarkable dental crowding. A second group, consisting of 60 pairs of dental casts (30 male and 30 female), exhibited little or no crowding. Mean and standard deviation of the following parameters were used to compare two groups. individual and collective mesiodistal tooth diameters, buccal and lingual arch widths and arch area. The following results were obtained. 1. The crowed group revealed larger tooth size than noncrowded group. (p < 0.01) 2. The crowded group smaller maxillary dental arch dimension than noncrowded group except lingual arch width at canine region. (p < 0.01) 3. The corwded group revealed smaller mandibular dental arch dimension than noncrowded group except lingal arch width at second premalar region in the male and buccal arch width at canine, premolar region in the female. (p < 0.01) 4. The crowded group revealed smaller arch area than noncrowded group in the female (p < 0.01), but there was no significance in the male.

• 건축역사연구
• /
• 제31권3호
• /
• pp.7-16
• /
• 2022

Fen(分°) is the proportional dimension unit of the standard timber section on Yingzaofashi(營造法式), and there is a phrase that not only structural members but the whole structural design of a building also use Fen as the dimension unit on the book. But in fact only the section dimensions of structural members are recorded by Fen, but the design dimensions are recorded by Chi(尺) on the book. Other historical records also described the building size by Chi. So there has been long-standing debate on the phase in Chinese architectural history society, including the recent confrontation on the analysis of survey figures of the east great hall of Foguangsi temple(佛光寺 東大殿). This paper analyzes all the records about the size of structural members and section planning on the book to make various calculation and evaluation. And it makes a survey of Cai(材) as the dimension and design unit between Chi and Fen through geometric analysis. Cai might be a rough unit of measurement in terms of structural and proportional scheming on Yingzaofashi, and the full size Cai(足材) had been a building scheming module before the Song dynasty.

• 한국의류산업학회지
• /
• 제24권1호
• /
• pp.117-126
• /
• 2022

This study aims to analyze the sizing information of women's ready-to-wear pants as indicated on online retail websites and to suggest better sizing communication that can assist customers in making successful apparel size selections. We gathered size specifications and size reference information for basic straight pants from 34 online apparel retail websites. Although the Korean standard recommends labeling the body dimension-based sizing code and specification, most websites preferred to use various types of sizing codes. Body measurements were only used by a few websites, and garment dimension descriptions were the most common method to indicate product size. Many websites provided size reference information through customer review boards and fit model images, however, there was insufficient body size information to allow customers to infer the fit of their body type. When using the size guidance tools, the major data input points were stature and weight measurements. However, the waist measurements of pants sizes guided only by stature and weight values revealed inconsistent ease allowance for corresponding body size populations, especially in the overweight group. Based on our findings, we propose a more effective method of communicating the size information of pants online. We expect that this will contribute to the efficiency of online apparel product display and build a better shopping environment that satisfies both sellers and consumers.