• Smart Structures and Systems
• /
• v.26 no.4
• /
• pp.419-433
• /
• 2020

Investigation of structural integrity has been a critical issue in the field of civil engineering for years. Visual inspection is one of the most available methods to explore deteriorative components in structures. Still, this method is not applicable to invisible damage of structures. Alternatively, system identification methods are capable of tracking modal properties of structures over time. The deviation of these dynamic properties can serve as indicators to access structural integrity. In this study, a modal tracking technique using frequency-domain system identification from seismic responses of structures is proposed. The method first segments the measured signals into overlapped sequential portions and then establishes multiple Hankel matrices. Each Hankel matrix is then converted to the frequency domain, and a temporal-average frequency-domain Hankel matrix can be calculated. This study also proposes the frequency band selection that can divide the frequency-domain Hankel matrix into several portions in accordance with referenced natural frequencies. Once these referenced natural frequencies are unavailable, the first few right singular vectors by the singular value decomposition can offer these references. Finally, the frequency-domain stochastic subspace identification tracks the natural frequencies and mode shapes of structures through quick stabilization diagrams. To evaluate performance of the proposed method, a numerical study is carried out. Moreover, the long-term monitoring strong motion records at a specific site are exploited to assess the tracking performance. As seen in results, the proposed method is capable of tracking modal properties through seismic responses of structures.

• Korean Journal of Head & Neck Oncology
• /
• v.19 no.2
• /
• pp.137-141
• /
• 2003

Introduction: A routine superficial parotidectomy with facial nerve dissection in parotid tumor surgery often results in facial dysfunction, Frey syndrome and defect in operation site. Formal facial nerve dissection has been a recommended procedure, because pleomorphic adenoma is a commonly recurrent tumor in case of inadequate surgical management, however it can not be always reasonable in aspect of postoperative sequelae. Patients and Methods: Through retrospective review of 245 cases parotidectomies and follow up for more than three years, clinicophathologic factors influencing to the selection of surgical procedure were considered to be age, sex, and preoperative pathology confirmed by preoperative MRI and FNA. Results: Five categories were established as follow for surgical decision in parotid tumor surgery. Category 1. Superficial lobe adenoma -- Superficial parotidectomy -- 124 Category 2. Deep lobe adenoma -- Deep parotidectomy -- 39 Category 3. Non pleomorphic adenoma -- Tumorectomy 1.5cm adenoma in young female -- Tumorectomy -- 25 Category 4. Recurrent multicentric tumor -- Parotidectomy+RT -- 9 Category 5. Parotid cancer; Parotidectomy + UND (RND) + RT -- 48 ; CORE (Composite Regional Ear Resection) -- 2 Conclusion: Surgical morbidity and recurrence rate could be minimized by individualizing the surgical procedure according to the category principle based on the clincopathologic features.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.4
• /
• pp.1611-1629
• /
• 2016

Recently, deploying WiFi access points (APs) for facilitating indoor localization has attracted increasing attention. However, most existing mechanisms in this aspect are typically simulation based and further they did not consider how to jointly utilize pre-existing APs in target environment and newly deployed APs for achieving high localization performance. In this paper, we propose a measurement-based AP deployment mechanism (MAPD) for placing APs in target indoor environment for assisting fingerprint based indoor localization. In the mechanism design, MAPD takes full consideration of pre-existing APs to assist the selection of good candidate positions for deploying new APs. For this purpose, we first choose a number of candidate positions with low location accuracy on a radio map calibrated using the pre-existing APs and then use over-deployment and on-site measurement to determine the actual positions for AP deployment. MAPD uses minimal mean location error and progressive greedy search for actual AP position selection. Experimental results demonstrate that MAPD can largely reduce the localization error as compared with existing work.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.4
• /
• pp.212-222
• /
• 2003

The ability to efficiently and robustly recover accurate 3D terrain models from sets of stereoscopic images is important to many civilian and military applications. A stereo matching has been an important tool for reconstructing three dimensional terrain. However, there exist many factors causing stereo matching error, such as occlusion, no feature or repetitive pattern in the correlation window, intensity variation, etc. Among them, occlusion can be only resolved by true multi-image stereo. In this paper, we present multi-image stereo method using DEM fusion as one of efficient and reliable true multi-image methods. Elevations generated by all pairs of images are combined by the fusion process which accepts an accurate elevation and rejects an outlier. We propose three fusion schemes: THD(Thresholding), BPS(Best Pair Selection) and MS(Median Selection). THD averages elevations after rejecting outliers by thresholding, while BPS selects the most reliable elevation. To determine the reliability of a elevation or detect the outlier, we employ the measure of self-consistency. The last scheme, MS, selects the median value of elevations. We test the effectiveness of the proposed methods with a quantitative analysis using simulated images. Experimental results indicate that all three fusion schemes showed much better improvement over the conventional binocular stereo in natural terrain of 29 Palms and urban site of Avenches.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.699-706
• /
• 2014

The probabilistic seismic performance of a standard Korean nuclear power plant (NPP) with an idealized isolation is investigated in the present work. A probabilistic seismic hazard analysis (PSHA) of the Wolsong site on the Korean peninsula is performed by considering peak ground acceleration (PGA) as an earthquake intensity measure. A procedure is reported on the categorization and selection of two sets of ground motions of the Tohoku earthquake, i.e. long-period and common as Set A and Set B respectively, for the nonlinear time history response analysis of the base-isolated NPP. Limit state values as multiples of the displacement responses of the NPP base isolation are considered for the fragility estimation. The seismic risk of the NPP is further assessed by incorporation of the rate of frequency exceedance and conditional failure probability curves. Furthermore, this framework attempts to show the unacceptable performance of the isolated NPP in terms of the probabilistic distribution and annual probability of limit states. The comparative results for long and common ground motions are discussed to contribute to the future safety of nuclear facilities against drastic events like Tohoku.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.691-693
• /
• 2015

Radio sources are very weak, as they can travel through large distances. Radio sources also have photons with low energies compared to others electromagnetic waves (EM). Microwave photons have a little more energy than radio waves, infrared photons have still more, then visible, ultraviolet, X-rays, and the most energetic electromagnetic wave is gamma-rays. Radio astronomy studies are restricted due to radio frequency interference (RFI) produced by people. If this disturbance is not minimized, it poses critical problems for astrophysical studies. The purpose of this paper is to profile RFI maps in Peninsular Malaysia with a minimum mapping technique for RFI interference. Decision-making processes using GIS (Geographical Information System) for the selection requires gathering information for a variety of parameters. These factors affecting the selection process are also taken into account. In this study, various factors or parameters are involved, such as the availability of telecommunications transmission (including radio and television), rainfall, water lines and human activity. This mapping step must be followed by RFI site testing in order to identify areas of low RFI. This study will benefit radio astronomy research, especially regarding the RFI profile.

• Journal of Fisheries and Marine Sciences Education
• /
• v.18 no.3
• /
• pp.261-271
• /
• 2006

The present study is aimed at evaluating the economic effectiveness of Abalone, haliotis discus hanai Releasing Project(ARP) conducted in the fishing ground owned by a fishing village in Ulsan, Korea. The results were summarized as follows: First, an average ratio of released abalones in the total landing after releasing is shown to be 85.0%. Second, the recapture rate of released abalones is 46.8%, exceeding the recapture rate of BEP(Break-Even-Point), 22.9%. Third, it is evaluated that total economic effectiveness of the ARP is 6.7-6.8 times, net effectiveness is 2.2-2.3 times, and the NPV(Net Present Value) discounted by a 8% interest rate is 474, 635 thousand wons, indicating the project is profitable. Considerable parts of the positive results on the ARP are based on some beneficial conditions, including the selection of favorable releasing sites, best self-regulation system of a fishing village for preservation of seaweed facilities and continued activities for protecting small abalones and their rearing. These results imply that the success of the ARP would be primarily dependent upon the selection of releasing site and effective management system after releasing.

• Proceedings of the Korean Geotechical Society Conference
• /
• 1998.04a
• /
• pp.37-46
• /
• 1998

Several researchers have developed a number of theoretical time factors to determine the coefficient of consolidation by biezocone excess pore water dissipation test in soft clay deposits. However, depending on the assumptions and analytical techniques, the estimated coefficient of consolidation could be in a considerably wide range even for a specific degree of consolidation. These solutions are obtained from an initial excess porewater pressure distribution which can be determined from. either the cavity expansion theory or the strain path method. The 야ssipation of the initial excess porelvater pressure has been usally simulated by means of linear-uncoupled consolidation analysis and then the dissipation curve is normalized by the initial excess porewater pressure for easy use. However. since there is no guidelines or rules on which method gives the best solution for obtaining the coefficient of consolidation from the dissipation curve, the final selection was only based on engineer's extrience and Judgements. Thus, such an arbitrary selection might be inappropriate for a specific site to characterize the consolidation behavior. In this paper, we reviewed various theoretical time factors and, based on this consideration, we mentioned needs for researches in selecting a specific solution that is compatible for Korean clays. Also we listed some source of errors that can be encountered in the procedure of dissipation analysis.

• Tunnel and Underground Space
• /
• v.6 no.3
• /
• pp.197-208
• /
• 1996

Due to the constraints in pre site-investigation for tunnel, it is essential to redesign the support structures suitable for rock mass conditions such as rock strength, ground water and discontinuity conditions for safe tunnel construction. For the selection of optimum support, it is very important to carry out the rock mass classification and in-situ measurement in tunnelling. In this paper, in a mountain tunnel designed by NATM in hard rock, the selectable system for optimum support has been studied. The tunnel is situated at Chun-an in Kyungbu highspeed railway line with 2 lanes over a length of 4, 020 m and a diameter of 15 m. The tunnel was constructed by drill & blasting method and long bench cut method, designed five types of standard support patterns according to rock mass conditions. In this tunnel, face mapping based on image processing of tunnel face and rock mass classification by RMR carried out for the quantitative evaluation of the characteristics of rock mass and compared with rock mass classes in design. Also, in-situ measurement of convergence and crown settlement conducted about 30 m interval, assessed the stability of tunnel from the analysis of monitoring data. Through the results of rock mass classification and in-situ measurement in several sections, the design of supports were modified for the safe and economic tunnelling.

• Proceedings of the Ginseng society Conference
• /
• 2002.10a
• /
• pp.212-226
• /
• 2002

North American ginseng production may have been maximized in the traditional growing areas in the last decade and further increases may be in woods grown root, for niche markets. The marketplace demands high quality roots. Most problems leading to low quality roots start with the grower and can be avoided. These include poor site selection, inadequate soil drainage, untimely and poorly applied pesticides, and neglect of good sanitary practices. Selection of low lying sites increased the plant damage from frost in Ontario in May 2002. Seeding is still the major method of propagation of ginseng in spite of some success in culturing different parts of the plant. Opportunities exist for shortening the stratification period of North American ginseng seed to allow spring planting. This may reduce disease incidence. Since only one-third of ginseng seed sown ultimately produces plants harvested after 3 years any approach that reduces disease incidence and improves seed germination, seedling emergence and crop stand must be pursued. Disease is the major problem in ginseng cutivation from seed stratification, soil preparation prior to planting, right through to drying of the roots. Replant disease remains as an unresolved problem and needs full characterization and new approaches for control. Much progress has been made in research and related extension activities in disease control although challenges will arise such as with Quintozene and its replacement with Quadris for control of diseases caused by Rhizoctonia. Decreased labor populations and increased associated costs for ginseng production are causing rapid mechanization in every aspect of the ginseng industry. Engineers, machinery dealers, and fabricators, and growers are being challenged to increase efficiency by mechanization.