• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.4
• /
• pp.537-544
• /
• 2021

In order to describe the fill-up stages of a near-surface disposal facility vault, a mock-up test is performed, and its behavior during the fil l -up stages is investigated. On an in-site concrete foundation with a l ength of 6600mm, a width of 6600mm and a thickness of 400mm, a reinforced concrete disposal vaul t is manufactured with 4 precast (PC) corner wal l s and 8 PC side wal l s. 36 wasted drums are pl aced on the 1st fl oor in 6 by 6, and then the empty space is fil l ed with grout fil l er. These processes are repeated up to the 5th floor, and the verticality and the joint gaps are measured for each fill-up stage. The verticality is measured using a level at 6 positions on each side wall (3 positions on the left and right sides, respectivel y), i.e. a total of 24 positions on the 4 side wal l s. The joint gaps are measured at 9 positions on each side wal l (3 positions on the left, center and right sides, respectively), I.e. a total 36 positions on the 4 side walls. To measure the joint gaps, crack tips are installed on the left and right sides of every joint gap, and vernier calipers are used. The measured verticality obtained through the mock-up test was found to be ±0.1° based on the initial stage (ST0), and the result of the joint gap was up to 0.38mm. This appears to have a negligible effect on the structure.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.20 no.4
• /
• pp.277-283
• /
• 2018

The crop growth model has been widely used for climate change impact assessment. Crop growth model require genetic coefficients for simulating growth and yield. In order to determine the genetic coefficients, regional growth monitoring data or yield trial data of crops has been used to calibrate crop growth model. The aim of this study is to verify that yield trial data of corn is appropriate to calibrate genetic coefficients of CERES-MAIZE. Field experiment sites were Suwon, Jinju, Daegu and Changwon. The distance from the weather station to the experimental field were from 1.3km to 27km. Genetic coefficients calibrated by yield trial data showed good performance in silking day. The genetic coefficients associated with silking are determined only by temperature. In CERES-MAIZE model, precipitation or irrigation does not have a significant effect on phenology related genetic coefficients. Although the effective distance of the temperature could vary depending on the terrain, reliable genetic coefficients were obtained in this study even when a weather observation site was within a maximum of 27 km. Therefore, it is possible to estimate the genetic coefficients by yield trial data in study area. However, the yield-related genetic coefficients did not show good results. These results were caused by simulating the water stress without accurate information on irrigation or rainfall. The yield trial reports have not had accurate information on irrigation timing and volume. In order to obtain significant precipitation data, the distance between experimental field and weather station should be closer to that of the temperature measurement. However, the experimental fields in this study was not close enough to the weather station. Therefore, When determining the genetic coefficients of regional corn yield trial data, it may be appropriate to calibrate only genetic coefficients related to phenology.

• Ecology and Resilient Infrastructure
• /
• v.6 no.1
• /
• pp.34-48
• /
• 2019

Naeseong Stream is a natural sand-bed river that flows through mountainous and cultivated area in northern part of Gyeongbuk province. It had maintained its inherent landscape characterized by white sandbars before 2010s. However, since then changes occurred, which include construction of Yeongju Dam and the extensive vegetation development around 2015. In this study, long-term monitoring was carried out on Naeseong Stream to analyze these changes objectively. This paper aims to provide a dataset of the investigation on channel morphology and vegetation for the period 2012-2018. Methods of investigation include drone/terrestrial photography, LiDAR aerial survey and on-site fieldwork. The main findings are as follows. Vegetation development in the channel of Naeseong Stream began around 1987. Before 2013 it occurred along the downstream reach and since then in the entire reach. Some of the sites where riverbed is covered with vegetation during 2014~2015 were rejuvenated to bare bars due to the floods afterwards, but woody vegetation was established in many sites. Bed changes occurred due to deposition of sediment on the vegetated surfaces. Though Naeseong Stream has maintained its substantial sand-bed characteristics, there has been a slight tendency in bed material coarsening. Riverbed degradation at the thalweg was observed in the surveyed cross sections. Considering all the results together with the hydrological characteristics mentioned in the precedent paper (I), it is thought that the change in vegetation and landscape along Naeseong Stream was mainly due to decrease of flow. The effect of Yeongju Dam on the change of the riverbed degradation was briefly discussed as well.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.29 no.4
• /
• pp.1-13
• /
• 2011

The purpose of this study is to consider practical examples of the method of utilizing plant material 'lotus' used by the ancients, and the value and meaning they wanted to get from it. The method of this study to do this is descriptive study to consider and interpret poem and painting reflecting impression and concept world of lotus. Summary of this study is as follows. First, ornamental value of lotus could be divided in effect of group plant and detail value held by the flower, the leaves and the stem. Especially, group plant lotus in large site provides unique landscape differentiated form other flowering plants. As well, another feature of lotus is its high ornamental value spread in detail elements including the flower, the leaves, the stem and the lotus seed. Second, fragrance expressed 'Hyang-won-ik-cheong(香遠益淸)' is an important charm of lotus. Lotus was utilized as olfactory element providing fragrance. The ancients considered lotus fragrance not only for enjoy but as symbolic object comparing noble man's dignity so that they expressed it in poem and painting. Third, lotus was utilized as acoustical element. That is, the sound of raindrops harmonizing the surface of water and wide lotus leaves was called 'hearing lotus fond and rain', enjoying it as classic grace. Fourth, summer play lotus sightseeing was called mind wash up meaning 'washing the mind polluted by the mundane world'. Such poetic taste was widely enjoyed by various classes from general public to royal family. Besides, poetic taste related with lotus is the method of drinking alcohol using the feature of big lotus leave and vacant stem, called 'Beog-tong-ju(碧筒酒)'. And in the Joseon dynasty period, when the distinction between the man and the woman influenced by Confucian, lotus seed and 'lotus collecting song' was important sign to express romance between man and woman. Lotus has been enamored by wide classes transcending cultural background as thought and religion since ancient times. Due to such reasons, various symbolic meaning of lotus and planting examples related to religious facilities as temples could not be considered in various manner is limitation of this study, and which is research project for the future.

• Journal of Life Science
• /
• v.31 no.5
• /
• pp.453-463
• /
• 2021

Hearing loss is a group of clinically and genetically heterogeneous disorders characterized by congenital- to adult-onset deafness with frequent additional symptoms such as myopathy, nephropathy, and optic disorders. It is commonly divided into two types: syndromic, with no other symptoms, and nonsyndromic, with other symptoms. Autosomal recessive hearing loss is relatively frequent in Pakistan, which may be due in part to frequent consanguineous marriages. This study was performed by whole exome sequencing to determine the genetic causes in two Pakistani consanguineous families with autosomal recessive hearing loss. We identified a pathogenic homozygous variant (p.Leu326Gln in MYO7A) in a family with prelingual-onset hearing loss and two variants of uncertain significance (p.Val3094Ile in GPR98 and p.Asp56Gly in PLA2G6) in a family with early-onset hearing loss concurrent with muscular atrophy. The missense mutations in MYO7A and PLA2G6 were located in the highly conserved sites, and in silico analyses predicted pathogenicity, while the GPR98 mutation was located in the less conserved site, and most in silico analysis programs predicted its nonpathogenic effect. Homozygosity mapping showed that both alleles of the homozygous mutations identified in each family originated from a single founder; spread from this single source might be due to consanguineous marriages. This study will help provide exact molecular diagnosis and treatment for autosomal recessive hearing loss patients in Pakistan.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.1
• /
• pp.70-82
• /
• 2021

The purpose of this study is to reveal the tendency of planting design through the analysis of the planting of designer's gardens in the Suncheon Bay National Garden and to derive implications for future garden planting designs. The results of the study are as follows: First, the results of the study show that the practice of tree-based planting is still valid. Large growing trees such as 'Pinus densiflrora', 'Celtis sinensis', 'Zelkova serrata', 'Machilus thunbergii', 'Pinus strobus' overwhelmed the size of the designer's garden(150 to 390㎡). Second, the selection of trees tended to be made considering the designer's intention and the decorative effects rather than by considering the physiological and ecological conditions of the site. Third, among the herbaceous, the rate of the planting of perennials was high. Fourth, the flowering period of planted herbaceous was the most common in summer, followed by spring, fall, and winter. Fifth, the frequency color of the planted herbaceous was the most common in summer, followed by spring, fall, and winter. Fifth, in terms of flower color frequency, the most common was the yellow-series, followed by red-series, blue-series Sixth, average height herbaceous plants(20~60cm) were planted the most(47.4%). Seventh, structural plants that determined the garden's framework depended on trees, and the focal plants mainly utilized were evergreen trees, and the midrange plants were the planted herbaceous plants. The implications derived from the above findings are as follows: First, to ensure the garden's quality and sustainability, the selection of trees should be carefully considered, not considering only the artist's intention but also taking into account the physical and ecological conditions. Second, herbaceous plants can be used in various ways― the garden's focal plants, midrange plants, and ground covers, so more active herbaceous planting needs to be considered. Third, in consideration of the winter landscape, herbaceous planting using characteristics, such as fruits and stems, as well as flower colors should be considered. Fourth, blue and black color herbaceous plants have a noticeable effect even in a small amount, so it is necessary to plant them actively. Fifth, for the design of herbaceous planting, where the individual property of plants can be expressed, the design method should be considered.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.47-54
• /
• 2021

Purpose : In order to evaluate the usefulness of clinical application of the Pause & Resume methods by comparing and analyzing the data stability and dose reduction effect when repeat scan assuming irregular breathing and using the Pause & Resume method during chest 4D CT using Quasar^TM Phantom. Materials and Methods : Using the Quasar^TM Phantom, set the breathing rate per minute to 15 BPM and 7.5 BPM, and set the S15 point as an irregular breathing section, and then placed OSLD to this point and use the Pause & Resume method to measure the dose of S15. CTDIvol, DLP, and ALARA-CT were used for comparative analysis of radiation dose between Pause & Resume method and Repeat-scan. In order to evaluate the stability and usability of the data applying the Pause & Resume method, the captured images were sorted by Advanced Workstation Volume Share7 and then sent to Eclipse^TM, the diameter and volume were analyzed by forming a contour on the iron ball in the Quasar^TM Phantom Results : When using Pause & Resume, the dose of OSLD measurement increased by 1.97 times in the section of S15. As a result of image evaluation, the average value of all volumes measured with and without the Pause & Resume method at 15 BPM and 7.5 BPM was 15.2 cm3±0.5%.Allthemeasuredvaluesfor the radius of iron ball were 3.1 cm regardless of whether Pause & Resume method was used or not. In the case of using Pause & Resume, 33% decreased from the lowest DLP value and 38% decreased from the highest DLP value of repeat scan, and the effective dose also decreased 32.1% from the minimum value and 37.6% from the maximum value. Conclusion: Irradiation dose was increased by Pause & Resume method because of the repeat scan on the S15 site where assuming irregular breathing occurred, However Pause & Resume method led to a significant reduction in dose on overall scan range. It also proved the usefulness of clinical application of the Pause & Resume method as a result of similar diameters and volumes of iron ball measurement.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.4
• /
• pp.223-233
• /
• 2021

The objective of this study was to investigate the effect of gypsum on the dry matter yield and the chemical composition of alfalfa in reclaimed tideland with soil dressing. The experimental site was Sukmoon reclaimed tideland. The tideland was reclaimed approximately 17 to 33 years ago and the 70 cm of soil was top-dressed. The soil that covers the reclaimed tideland brought from the island did not treat di-salinized. Treatments were consisted of three groups; control group where no gypsum (G0) was applied and two experimental groups where 2 ton/ha (G2) and 4 ton/ha (G4) of gypsum were applied, respectively. The first harvest was conducted when the alfalfa reached early flowering (open the flower 10%), and after that subsequent harvest was conducted at approximately 35 days intervals. The dry matter yield of the alfalfa showed that G2 was significantly higher in the first year than G0 and G4, and G2 tended to be higher in the second year than G0 and G4, although there were no significant differences between treatments. The reason for the high dry matter yield in G2 was that the soil pH and EC of the soil were at marginal and ideal levels and the coverage and alfalfa botanical composition were also high. In both years, there were no differences in the crude protein, neutral detergent fiber and acid detergent fiber contents and relative feed value between gypsum treatments. Meanwhile, the results in the first and second years showed that the alfalfa dry matter yield were negatively affected by droughts stress in spring and concentrated precipitation in summer. Therefore, this study suggests gypsum treatment in reclaimed tidal land could increase the dry matter yield of alfalfa, and 2 ton/ha of gypsum was the optimum rate.

• Resources Recycling
• /
• v.31 no.5
• /
• pp.67-76
• /
• 2022

The furniture industry has a high possibility to create value-added and a high potential to create new occupations due to the characteristics of the industry, which mainly consists of small and medium-sized enterprises (SMEs). However, the used furniture, which has sufficient reuse value, is also crushed and used as solid refuse fuel (SRF) recently. Besides, the number of waste treatment companies continues to decrease, and it occurs congestion of wood waste. As a way to solve the issue, a business model development of remanufacturing used furniture can be suggested as an alternative due to its high circular economic efficiency. Remanufacturing business including furniture industry creates positive effects in various aspects such as economic, environmental and job creation. In other words, remanufacturing is an effective recycling way to reduce input resources and energy in the production process. The results of economic analysis show that the expected annual revenue from the single worker furniture remanufacturing site was 104 million won which is 3.11 times more than the average income of a single-worker household in Korea and its B/C ratio was estimated about 30 which means high business feasibility. Revenue through furniture remanufacturing also showed 320 times higher than that of SRF production from the perspective of weight. In addition, it is shown that the GHGs reduction from the furniture remanufacturing is 2.2 ton CO₂-eq. per year, which is similar to the amount of GHGs absorption effect of 937 pine trees or 622 Korean oak trees annually. Thus the results of this study demonstrate that it is important to adopt an appropriate recycling method considering the economic and environmental effects at the end-of-life stage.

• Journal of the Korean Society of Radiology
• /
• v.17 no.2
• /
• pp.257-265
• /
• 2023

The purpose of this study was to vaccinate every year according to the general characteristics of COVID-19, whether to vaccinate every year according to the vaccination experience, whether to vaccinate every year according to knowledge/attitude about vaccination, and negative responses to the vaccinate every year In order to understand the factors affecting the vaccination physician every year by identifying the factors of Statistical analysis is based on general characteristics, variables based on vaccination experience, and knowledge/attitudes related to vaccination. The doctor calculates the frequency and percentage, A square test (-test) was performed, and if the chi-square test was significant but the expected frequency was less than 5 for 25% or more, a ratio difference test was performed with Fisher's exact test. Through multiple logistic regression analysis using variables that were significant in simple analysis, a predictive model for future vaccination and the effect size of each independent variable were estimated. As statistical analysis software, SAS 9.4 (SAS Institute Inc., Cary, NC, USA) was used, and because the sample size was not large, the significance level was set at 10%, and when the p-value was less than 0.10, it was interpreted as statistically significant. In the simple logistic regression analysis, the reason why they answered that they would not be vaccinated every year was that they answered 'to prevent infection of family and hospital guests' rather than 'to prevent my infection' as the reason for the vaccination. It was 11.0 times higher and 3.67 times higher in the case of 'for the formation of collective immunity of the local community and the country'. The adverse reactions experienced after the 1st and 2nd vaccination were 8.42 times higher in those who did not experience pain at the injection site than those who did not, 4.00 times higher in those who experienced swelling or redness, and 5.69 times higher in those who experienced joint pain. There was a 5.57 times higher rate of absenteeism annually than those who did not. In addition, the more anxious they felt about vaccination, the more likely they were to not get the vaccine every year by 2.94 times.