• Journal of Microbiology
• /
• v.45 no.3
• /
• pp.219-226
• /
• 2007

Insertion sequence IS1112 is a repetitive element with a relatively high number of copies in Xanthomonas oryzae pv. oryzae (Xoo), the causal agent of bacterial blight of rice (Oryza sativa L.). Three new loci of IS1112 were identified in seven Chinese strains of Xoo using a single oligonucleotide primer J3; 5'-GCTCA GGTCAGGTGGCCTGG-3' by insertion-sequence-based polymerase chain reaction (IS-PCR). Among the three new loci of IS1112, two were located in the open-reading frame region of genes fhuA and cirA, which encode TonB-dependent receptors, and the third in ISXo2, another type of insertion sequence in Xoo genome. Three variants of IS1112 were identified in those three loci based on their sequence similarities: two were identical to IS1112a and IS1112b, reported in strain PXO86 from the Philippines, while the third was a new member of IS1112, defined as IS1112d. Inserting IS1112 in gene fhuA caused three bases, GGT, to be duplicated at the target site, but inserting it in gene cirA did not cause any duplication in the target site. The diversity of IS1112 sequence and insertion loci in Xoo genome and their potential effects are discussed.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.3
• /
• pp.183-190
• /
• 2014

Since Scenic Sites, heritages to protect the value of landscapes, include valleys and mountains, the cultural heritage protection zones and historical and cultural environments preservation districts are designated extensively. So the landscape protection effects of the designation of scenic sites should be examined. Accordingly, the purpose of this research is to present the methods of efficient institution of district for landscape protection of scenic sites. As the research subject, Cheongamjeong Pavilion and Seokcheongyegok Valley in Bonghwa (Scenic Site No. 60), which has the highest designation rate, was selected. The results of this research using the cumulative visibility technique of GIS are as follows. First, the method of selecting the viewpoint by preparing the reverse cumulative visibility from important landscape resources of the valley was presented. The reverse cumulative visibility can be utilized for rational selection of the viewpoint with regard to scenic sites. Second, the landscape analysis method in consideration of human viewing angle and the visibility of the background of landscape resources was developed. Third, the hierarchical landscape protection method of scenic sites utilizing cumulative visibility was presented. Fourth, it was established through on-site inspections that the method of institution of district is the practical method.

• Magazine of the Korea Concrete Institute
• /
• v.18 no.6 s.95
• /
• pp.38-45
• /
• 2006

• Magazine of the Korea Concrete Institute
• /
• v.20 no.5
• /
• pp.53-58
• /
• 2008

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.19 no.3
• /
• pp.29-44
• /
• 2016

The purpose of this study is to quantitatively and visually analyze the degree of green biotope fragmentation caused by road construction and other development work using FRAGSTATS and GUIDOS tool. Moreover, linking of the endangered species research, we mapped "Biotope Fragmentation Map" of Daejeon-city. The findings of the study are summarized as follows: First, as the result of FRAGSTATS, landscape indices : number of patch(NP), mean patch size (MPS), edge length(TE), mean nearest neighbor distance(MNN), edge shape(LSI) showed meaningful change from fragmentation. Moreover, the result of GUIDOS analysis, middle core-small core-bridge-branch-edge-islet-perforation showed increase of area percentage without large core. Lastly, analysis result of 'Biotope Fragmentation Map' revealed that changing site of large core's size appeared eighteen-site and designated as the special protection area appeared forty-one site. As the result of the two data, overlapping areas that showed both change of core size and revealed special protection areas revealed four site. For example, five species of endangered species appeared on the NO. 4 site in 'Biotope Fragmentation Map'. The findings of this study as summarized above are considered to play an important role in basic data preventing green biotope fragmentation at the planned level from various development work.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.2_spc
• /
• pp.70-85
• /
• 2020

This paper introduces the 'Smart Scoping for Environmental Investigations Technical Guide' issued by the US Environmental Protection Agency in 2018, which describes the use of smart scoping during lifecycle of remedial investigation projects. This paper also briefly summarizes the guidelines of soil and groundwater contamination investigation of South Korea. The smart scoping practices can support the development of a robust and realistic conceptual site model that is very useful for investigations and evaluations of the contaminated site. The application of evaluation tools relevant for the site-specific characteristics is important for the development of a conceptual site model. The smart scoping recommends the use of previous investigation data and implementation of best proven strategies for successful remedial investigation project. The use of smart scoping in contaminated site investigation will provide better management of contaminated sites.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.05a
• /
• pp.13-16
• /
• 2005

Generally, as corrosive protection processing of a steel structure, zinc galvanizing and heavy duty coating paint are applied. However, zinc galvanizing has the difficulty of restriction of a size, or on-site construction. Moreover, heavy duty coating paint has a problem with many administrative and maintenance expenses with short problem of adhesion, corrosion generating of a damage portion, and maintenance management cycle. In this study, a salt water spray test, CASS test, and the electrochemistry examination were carried out for the thermal metal spray method of construction for corrosive protection performance evaluation. Moreover, the corrosive protection life of a thermal metal spray method of construction was quantitatively calculated on the basis of this experiment. in consideration of LCC, the economical efficiency of a general corrosive protection method of construction and a thermal metal corrosive protection method of construction was compared. Consequently, although initial construction expense was estimated 16 to $30\%$ high, as for a thermal metal spray method of construction, it turns out that the administrative and maintenance expenses for 100 years became cheap 9.3 to 13 or more times.

• Environmental Engineering Research
• /
• v.15 no.4
• /
• pp.231-237
• /
• 2010

With increased chemical and economic development activities in upstream areas, the amounts of pollutants released have increased, and as such, so has the need for positive management of water supply source areas. Although more than 90% of the water supply sources in Korea depend on direct intake from surface water, the interest in indirect intake, such as riverbank filtration water, has recently risen, with some local governments currently undertaking indirect intake. Even in cases of indirect intake, water supply source protection zones need to be assigned for the comprehensive control of pollutants. To establish water quality protection zones for indirect intake, the scope of the protection zones needed to reflect the hydrological features of the water-bearing deposits of each site. Water source protection areas were estimated and presented as the 1st (within a 100 m radius from an intake well) and 2nd (within a 2 km radius from an intake well) zones. The 1st zone was more sensitive; hence, the installation of various facilities should be prohibited, and the area should be regarded as off-limits. For the 2nd zone, appropriate management should prohibit and restrict activities already present in the water source protection zone.

• Journal of the Society of Disaster Information
• /
• v.16 no.3
• /
• pp.421-429
• /
• 2020

Purpose: The purpose of this study is to present step-by-step countermeasures to prevent fires in sandwich panel warehouses and to enhance on-site fire response capabilities. Method: Interviews of firefighters related to fire sites, advice from fire experts, and experiments on protection performance were conducted to draw up measures for each element to strengthen on-site response capabilities. Result: The fire safety management checklist for warehouse fire safety managers and the installation standards for wall protection of sandwich panel warehouses are presented. In addition, Standard Operational Procedures(SOP) for fire application of sandwich panel warehouses were established for firefighters on-site. Conclusion: Through this study, step-by-step fire safety measures were established for preventing, protecting and suppressing fires in sandwich panel warehouses.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.96-105
• /
• 1995

The better industry develops, the more spaces need but in the limited area. Most building become larger and more complicated if the more spaces need in the constant area. And this leads to do underground work in long period generally six(6) months for 6 basement stories due to the selection of TOP DOWN technique. Working environment in this underground area can be problems and should not be overlooked, because air quality in underground spaces become quickly worse. Recently, department name to control construction safety has been changed to ENVIRONMENT & SAFETY TEAM from SAFETY TEAM. This means that it is very important to control against environmental condition at site so much. Overall construction work as well as underground work should conform to the requirement of working environment, particularly against inhabitants around the construction area. Strut protection, one of earth protection method, in case to 40m long strut may become weaker due to thermal stress or its longitudinally compressive strain and the another one, earth anchor protection may not be applied to the site In case of encroaching on vertical underground borderline because of regulation to prohibit it. It is necessary that TOP DOWN technique should be introduced in order to solve the external and internal problem of the site such as difficulty level of the work, potential danger with excavating depth, and shortening workperiod. It is needed that improving way of working condition should be shown and simplified computer simulation program should be also provided for checking pollution level & ventilation, excluding of lighting problem here. Results measured with conformance to the Regulation for Working Environment Measurement, enforced by Ministry of Labor have been applied to the computer program developed here. Sample air taken at unit workplace which was considered as exposing condition of pollutant at breathing point and within a range of behavior of the workers, Identified exposing group in underground work, using Moded Flow Life Finally, three types of ventilation system, type I with blower & ventilator, type II natural supply with mechanical ventilation system, and type I mechanical ventilation with Drivent Fan Unit System are selected for this study.