• Korean Journal of Remote Sensing
• /
• v.21 no.6
• /
• pp.493-503
• /
• 2005

In this study, the weight of evidence(WofE) technique based on GIS was applied to spatially estimate the groundwater yield characteristics at the Pocheon area In Gyunggi-do. The groundwater preservation depends on many hydro-geologic factors that include hydrologic data, land-use data, topographic data, geological map and other natural materials collected at the site, even with man-made things. All these data can be digitally processed and managed by GIS database. In the applied technique of WofE, the prior probabilities were estimated as the factors that affect the yield on lineament, geology, drainage pattern or river system density, landuse and soil. We calculated the value of the weight values, W+ and W-, of each factor and estimated the contrast value of it. Results by the groundwater yield characteristic computation using this scheme were presented feasibility map in the form of the posterior probability to the consideration of in-situ samples. It is concluded that this technique is regarded as one of the effective techniques for the feasibility mapping related to the estimation of groundwater-bearing potential zones and its spatial pattern.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.5
• /
• pp.321-327
• /
• 2006

In Korea, there is a growing competitive for water resources between industrial, domestic and agricultural consumer, and the environment as many other OECD countries. The demand on water use is also affecting aquatic ecosystems particularly where withdrawals are in excess of minimum environmental needs for rivers, lakes and wetland habits. OECD developed three indicators related to water use by the agriculture in above contexts : the first is a water use intensity indicator, which is expressed as the quantity or share of agricultural water use in total national water utilization; the second is a water stress indicator, which is expressed as the proportion of rivers (in length) subject to diversion or regulation for irrigation without reserving a minimum of limiting reference flow; and the third is a water use efficiency indicator designated as the technical and the economic efficiency. These indicators have different meanings in the aspect of water resource conservation and sustainable water use. So, it will be more significant that the indicators should reflect the intrinsic meanings of them. The problem is that the aspect of an overall water flow in the agro-ecosystem and recycling of water use not considered in the assessment of agricultural water use needed for calculation of these water use indicators. Namely, regional or meteorological characteristics and site-specific farming practices were not considered in the calculation of these indicators. In this paper, we tried to calculate water use indicators suggested in OECD and to modify some other indicators considering our situation because water use pattern and water cycling in Korea where paddy rice farming is dominant in the monsoon region are quite different from those of semi-arid regions. In the calculation of water use intensity, we excluded the amount of water restored through the ground from the total agricultural water use because a large amount of water supplied to the farm was discharged into the stream or the ground water. The resultant water use intensity was 22.9% in 2001. As for water stress indicator, Korea has not defined nor monitored reference levels of minimum flow rate for rivers subject to diversion of water for irrigation. So, we calculated the water stress indicator in a different way from OECD method. The water stress indicator was calculated using data on the degree of water storage in agricultural water reservoirs because 87% of water for irrigation was taken from the agricultural water reservoirs. Water use technical efficiency was calculated as the reverse of the ratio of irrigation water to a standard water requirement of the paddy rice. The efficiency in 2001 was better than in 1990 and 1998. As for the economic efficiency for water use, we think that there are a lot of things to be taken into considerations to make a useful indicator to reflect socio-economic values of agricultural products resulted from the water use. Conclusively, site-specific, regional or meteorogical characteristics as in Korea were not considered in the calculation of water use indicators by methods suggested in OECD(Volume 3, 2001). So, it is needed to develop a new indicators for the indicators to be more widely applicable in the world.

• Korean Journal of Weed Science
• /
• v.30 no.1
• /
• pp.17-24
• /
• 2010

Field study to find appropriate species for phytoremediation and phytomonitoring with higher plants was carried out at four abandoned metalliferous mines. In order to know the tolerant degree of plant resources collected at heavy metal polluted sites, soil and plants were sampled at same sites and metal concentrations were determined. Most serious heavy metal polluted in the sites was As that showed range from 29.1 to 1372.2 mg $kg^{-1}$ in investigated area. The dominant species were Oenothera biennis, Commelina communis, Persicaria senticosa, Conyza annuus, Artemisia princeps, and Erigeron canadensis. These species were predominant species that were proliferated in any survey area. Compared with other sites, vegetational characteristics of Dal-Seong, a mine site abandoned early in 1973, showed higher diversity index and lower dominance index. Distributions of weed species according to life cycle indicated that the proportions of perennial plants were lowered in every investigated site. Although the polluted areas were distant from each other, similarity indices among these vegetation were relatively similar. These results means the vegetations of abandoned mine areas were beginning stage of vegetational succession, and the vegetations were adversely affected by disturbance with heavy-metals and lack of water in soil.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.4
• /
• pp.705-713
• /
• 2016

For the soft ground construction, the factors not considered in the design stage occurs in the construction stage so that they cause the increase of the construction cost due to the structural stability and the design change. The subject of the study is the construction section of the industrial complex access road made in the Ochang region of Chungcheongbuk-do. The study is concerned with selecting the soft ground handling method such as the replacement method using rock debris and the surcharge reflecting the service load as the soft ground handling measure and analyzing the effect of reducing the construction cost with the stability of structures and the reduction of the construction period. The soft ground in the study section consists of sandy and cohesive soil and is 2.4m to 5.5m deep. It is distributed unevenly between the 1.5m to 5.9m stratums under the ground surface. Settlement is not serious, but the future uneven settlement and difference are expected so that the future settlement behavior is estimated by analyzing the site measurement results after the soft ground treatment. Moreover, in consideration of the regional characteristics and economic efficiency, soil with good quality is replaced with rock debris as the replacement material so that 29% of the construction cost is reduced due to the increase of stability and the reduction of duration. If the estimation of the dispersion of the pore water pressure within the dam body and the change of the underground water level and the relation of the actually measured soft ground with consolidation is studied further on the basis of the study, it is expected that the behavior of the soft ground will be correctly estimated in various site conditions.

• Journal of Conservation Science
• /
• v.36 no.5
• /
• pp.421-429
• /
• 2020

This study examined the manufacturing process of a furnace wall excavated from the Songdu-ri Site in Jincheon, and the difference in material composition between the 11 layers of the wall using physicochemical analyses. Based on microstructure observations, these layers could be largely divided into three groups: an undercalcined first layer, calcined second to ninth layer with evidences of partial heat, and non-fired soil layers from the tenth to the eleventh layer. Particle size analyses revealed that the fired layer constituted a relatively higher content of coarse sand than the non-fired layer. This difference was further confirmed by the results of the curvature coefficient analysis. An analysis of the constituent minerals showed similar overall XRD diffraction patterns between the different layers, but variations in the intensity of the low-temperature and high-temperature minerals. This indicates that the degree of heat was different. The thermal analysis results demonstrated that the heating peak of mullite was only reached in the first and second layers of the wall, thus implying these as the layers to be finally used. Consequently, no significant difference could be observed between the materials of the various layers of the wall. Thus, it can be suggested that the furnace wall was constructed using clay, which had a composition similar to that of the soil present in the area. However, the shape and characteristics of the constituent particles between the layers displayed partial variations, and it is possible that some external materials might have been added.

• Journal of Korean Society of Forest Science
• /
• v.89 no.3
• /
• pp.397-404
• /
• 2000

This study was carried out to investigate the influence of the road structure and site conditions on side-ditch stability of forest road. For experimental purposes, the forest road in the Kwangrung Experimental Forest, Korea Forestry Research Institute, was chosen as a study site. A total of 556 plots wes set up as every longitudinal gradient changing points by belt-transect method. Data of 10 road structural characteristics and side-ditch stability were collected from each plot and analysed by Quantification II. The main factors in order of partial correlation coefficient were longitudinal gradient, road position, inclination of cut-slope, constituent material of cut-slopes, distance of surface flow, cross-sectional shape of road, pavement material, vegetation of cut-slopes and length of cut-slope. The erosion of side-ditch of forest road occurred in the following cases; more than 8% of the longitudinal gradient, road position of hill under side and foot hill, more than $50^{\circ}$ of inclination of cut-slope, constituent material of cut-slopes of hard soil and gravel soil, more than 80m of distance of surface flow, pavement material with earth or gravel, more than medium covered of vegetation of cut-slopes, and the straight and convex form of road-bed.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.5-20
• /
• 2010

One-dimensional equivalent linear site response analysis is widely used in practice due to its simplicity, requiring only few input parameters, and low computational cost. The main limitation of the procedure is that it is essentially a linear method, in which the time dependent change in the soil properties cannot be modeled and constant values of shear modulus and damping is used throughout the duration of the analysis. Various forms of modified equivalent linear analyses have been developed to enhance the accuracy of the equivalent linear method by incorporating the dependence of the shear strain with the loading frequency. The methods are identical in that it uses the shear strain Fourier spectrum as the backbone of the analysis, but differ in the method in which the strain Fourier spectrum is smoothed. This study used two domestically measured soil profiles to perform a series of nonlinear, equivalent linear, and modified equivalent linear site response analyses to verify the accuracy of two modified procedures. The results of the analyses indicate that the modified equivalent linear analysis can highly overestimate the amplification of the high frequency components of the ground motion. The degree of overestimation is dependent on the characteristics of the input ground motion. Use of a motion rich in high frequency contents can result in unrealistic response.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.320-326
• /
• 2015

Mechanical properties of woods are easily affected by the differences of site environment such as soil and climate changes. In this study, the relationship between mechanical properties and growth factors for Cryptomeria japonica stands in Jeollanam-do Province, Gyeongsangnam-do Province and Je-ju island was analyzed. From these plot data, bending strength, compressive strength, and shear strength were analyzed by Duncan's new multiple range test. The results of Duncan's new multiple range test analysis indicated that bending strength, compression strength, and shear strength were positively related to tree mean height, and stem number per ha, respectively, while they were inversely proportional to DBH (diameter at breast height), elevation, and soil drainage. As a result of this study, there are high correlations between mechanical properties of wood and stand characteristics of Cryptomeria japonica by the region, this findings are very useful to apply the silvicultural treatment system to produce high quality timber as a basic data on this species (distributed in southern region of Korea).

• Journal of Korean Society of Forest Science
• /
• v.104 no.4
• /
• pp.598-606
• /
• 2015

This study analyzed the characteristics of the disaster occurrence and disaster-prone zones on the 85 forest roads in the Jeollabuk-do area by referring to their forest environment factors. The on-site survey reveal the types of forest road disasters as follows: erosions of cutting slopes 54.1%, erosions of the filling slope 35.3%, collapses of cutting slopes with filling slope 9.4%, and erosions of road surface 1.1%. Disasters most frequently occurred in the vertical location (the hillside) and the horizontal location (the slope), and the forest factors affecting the road disasters were degree of cutting slopes in $31^{\circ}{\sim}40^{\circ}$, degree of filling slopes in $21^{\circ}{\sim}30^{\circ}$, and the soil texture of SiL. The most significant factors on the most frequent occurrence of forest road disasters were forest type of coniferous, slope aspect northeast, forest age of plantation and felling area, and rainfall in 1601~1700. An analysis of the occurrence of the forest road disasters in the Jeollabuk-do area showed a positive correlative relationship with the following factors of the forest environment within a 1% error: degree of cutting slope in $31^{\circ}{\sim}40^{\circ}$, annual accumulation rainfall in 1601~1700. and showed a positive correlative relationship with the following factors of the forest environment within a 5% error: horizontal location of valley, forest type of coniferous, length of slope more than 20 m, forest age of plantation and felling area, soil texture of SiL.

• Journal of the Korean association of regional geographers
• /
• v.13 no.2
• /
• pp.129-142
• /
• 2007

The Purpose of this study is to evaluate the value of abandoned paddy fields as wetland ecosystems and their suitability as habitats for various species. Physical and chemical characteristics of soils and the change of vegetation in paddy fields were analysed -with the passage of time after cease of cultivation. The results of analyses for soil characteristics, vegetation succession, and functional values of abandoned paddy fields as wetlands were as follows: First, top soils become coarser as years after abandonment increase. Second, as the years of abandonment passed. there were significant differences in organic matter, available phosphorate and calcium, while not in magnesium and cation exchange capacity(CEC). Third, species increased from early stage till middle stage, and decreased in late stage. In similarity analysis of species composition, sites were classified into three groups according to the stage of succession. Upper and lower terraces at Daetgol were classified as early stage of succession. The 1st, 2nd and 3rd terraces at Nonbanggol were in middle stage, while tile 4th and 5th were in late stage. Forth, according to evaluation sheets of MoE and RAM(Rapid Assessment Method) standards, me overall average of functional value of Nonbanggol site were 2.13, classified as "common".