• The Korean Journal of Ceramics
• /
• 제2권4호
• /
• pp.184-187
• /
• 1996

Diamod nucleation by mw assisted CVD was examined various conditions namely, (1) diamond nucleation on variour substrate materials, such as Si, cubic BN, pyrolytic BN and AIN, (2) AST(Activated species transport) method which promote nucleation of diamond on single crystal and polycrystalline alumina substrate was developed. (3) Effect of bias enhancement of nucleation on single crystalline Si was examined, and finally (4) DST (Double step treatment) method was developed to enhance diamond nucleation on Ni. In this method, we separated carbon diffusing process into Ni, carbon precipitating process from the inside of Ni and diamond precipitation process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.373-375
• /
• 1997

In this study, we designed multiple mesh circuit consisting of 3-6 meshes and pulse superposition one consisting of a 3 mesh, and fabricated the electrical power supply and the single elliptical resonator. We developed the two pulse superposition technique forming the step pulse shapes of pulsed Nd:YAG laser with single shot multivibrator and 2 SCRs. Laser beam generated by multiple mesh circuit and superposition one respectively irradiated target surface to analyze process state of surface with spark and vapor. And it was obtained experimental results that all superposition meshes had common points which the best efficiency was obtained at delay time 0[${\mu}s$], followed by, no superposition and obtained at delay time 250[${\mu}s$].

• 상하수도학회지
• /
• 제13권1호
• /
• pp.51-60
• /
• 1999

An intermittently-aerated, intermittently-decanted single-reactor process (KIDEA process : KIST intermittently decanted extended aeration process) was applied for nitrogen removal from wastewater. Synthetic wastewater with chemical oxygen demand (COD): nitrogen (N) ratio of approximately 5.25: 1 was used. The average COD removal efficiency reached above 95%, and under optimal conditions nitrogen removal efficiency also reached above 90%. This process consisted of 72 minute aeration, 48 minute settling and 24 minute effluent decanting with continuous feeding of influent wastewater from the bottom of the reactor, and did not require a separate anoxic mixing-phase. In this process, nitritation ($1^{st}$ step of nitrification) was induced but nitratation($2^{nd}$ step of nitrification) was suppressed. Main factors responsible for the accumulation of nitrite ion in the experimental condition were free ammonium and dissolved oxygen. This condition of nitrite build-up accelerated by continuous feed flow in the bottom of the KIDEA reactor because of high concentration of ammonia nitrogen in the influent. This research provides one of answers to control nitrate build-up.

• Journal of Microbiology and Biotechnology
• /
• 제27권1호
• /
• pp.84-91
• /
• 2017

The concern over the use of melittin in honey bee venom due to its adverse reaction caused by allergens such as phospholipase A2 ($PLA_2$) and hyaluronidase (HYA) has been an obstacle towards its usage. We developed a novel single-step method for melittin purification and the removal of $PLA_2$ and HYA. This study explores the influence of pH, buffer compositions, salt concentration, and types of cation-exchange chromatography resins on the recovery of melittin and the removal of both HYA and $PLA_2$. Melittin was readily purified with a strong cation-exchange resin at pH 6.0 with sodium phosphate buffer. It resulted in a recovery yield of melittin up to 93% (5.87 mg from a total of 6.32 mg of initial melittin in crude bee venom), which is higher than any previously reported studies on melittin purification. $PLA_2$ (99%) and HYA (96%) were also successfully removed. Our study generates a single-step purification method for melittin with a high removal rate of $PLA_2$ and HYA, enabling melittin to be fully utilized for its therapeutic purposes.

• 한국초전도ㆍ저온공학회논문지
• /
• 제13권1호
• /
• pp.1-5
• /
• 2011

[ $CeO_2$ ]has been widely used for single buffer layer of coated conductor because of superior chemical and structural compatibility with $ReBa_2Cu_3O_{7-{\delta}}$(Re=Y, Nd, Sm, Gd, Dy, Ho, etc.). But, the surface of $CeO_2$ layer showed cracks because of the large difference in thermal expansion coefficient between metal substrate and deposited $CeO_2$ layer, when thickness of $CeO_2$ layer exceeds 100 nm on the biaxially textured Ni-3%W substrate. The deposition rate has been limited to be less than 6 $\AA$/sec in order to get a good epitaxy. In this research, we deposited $CeO_2$ single buffer layers on biaxially textured Ni-3%W substrate with 2-step process such as thin nucleation layer(>10 nm) with low deposition rate(3 $\AA$/sec) and thick homo epitaxial layer(>240 nm) with high deposition rate(30 $\AA$/sec). Effect of deposition temperature on degree of texture development was tested. Thick homo epitaxial $CeO_2$ layer with good texture without crack was obtained at $600^{\circ}C$, which has ${\Delta}{\phi}$ value of $6.2^{\circ}$, ${\Delta}{\omega}$ value of $4.3^{\circ}$ and average surface roughness(Ra) of 7.2 nm within $10{\mu}m{\times}10{\mu}m$ area. This result shows the possibility of preparing advanced Ni substrate with simplified architecture of single $CeO_2$ layer for low cost coated conductor.

• 한국세라믹학회지
• /
• 제39권7호
• /
• pp.675-679
• /
• 2002

강화유리를 제조하기 위해서, 디스플레이 기판으로 사용되는 soda-lime-silicate 유리를 대상으로 단일이온교환 특성에 대하여 3점곡강도와 잔류응력을 조사하였다. 단일이온교환을 47$0^{\circ}C$에서 1시간 처리 후, 45$0^{\circ}C$에서 24시간 행하였을 때, 62.5$\times$10$_{6}$ kg/$m^2$의 최대 강도 값을 나타내었다. 또한, 곡강도 측정 후 얻어진 시편의 파단면에 존재하는 잔류응력층을 파괴분석을 통하여 관찰한 결과, 이 잔류응력층이 외부하중에 대한 탄성 변형에너지를 흡수하여 유연성을 증가시킴을 알 수 있었다 또한, 탄성변형에너지 흡수는 만곡변화, 균열가지수 및 취성특성 분석에서도 관찰되었다.

• 전기화학회지
• /
• 제9권2호
• /
• pp.95-99
• /
• 2006

마이크로전극을 사용하여 니켈-수소 전지의 전극 활물질인 수소저장합금$(MmNi_{3.55}Co_{0.75}Mn_{0.4}Al_{0.3})$과 수산화니켈의 단일입자에 대하여 전기화학적 특성을 평가하였다. 즉 마이크로 전극을 활물질 입자 한 개 위에 전기적인 접촉을 이루도록 조정하고 전위 주사(Cyclic Voltammograms) 및 포텐셜 스텝(Potential Step)으로 실험을 실시하였다. 그 결과 수소저장 합금 입자의 경우 -0.9, -0.75, -0.65V 부근에서 3개의 산화 피크 및 -0.98V에서 수소발생 전위, 그리고 수산화니켈 입자의 경우 프로톤 산화 환원 반응(0.45V, 0.32V)과 산소 발생 반응 전위를 보다 명확하게 확인 할 수 있었다. 그리고 수소흡장합금 입자 내에서의 수소 흡장 및 방출 전 과정에 대해 수소 확산계수 $(D_{app})\;(10^{-9}\sim10^{-10}cm^2/s)$가 얻어졌다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제2권2호
• /
• pp.65-72
• /
• 2001

The design of multi-stage gear drives is a time-consuming process, since on includes more complicated problems, which are not considered in the design of single-stage gear drives. The designer has th determine the number of reduction stages and the gear ratios of each reduction state. In addition, the design problems include not only the dimensional design but also the configuration design of gear drive elements. There is no definite rule and principle for these types of design problems. Thus the design practices largely depend on the sense and the experiences of the designer , and consequently result in undesirable design solution. We propose a new generalized design algorithm to support the designer at the preliminary design phase of multi-stage gear drives. The proposed design algorithm automates the design process by integrating the dimensional design and the configuration design process. The algorithm consists of four steps. In the first step, a designer determines the number of reduction stage. In the second step. gear ratios se chosen by using the random search method. In the third step, the values of basic design parameter are chosen by using the generate and test method. Then, the values of other dimension, such ad pitch diameter, outer diameter, and face width, are calculated for the configuration design in the final step. The strength and durability of a gear is guaranteed by the bending strength and the pitting resistance rating practices by using the AGMA rating formulas. In the final step, the configuration design is carried out b using the simulated annealing algorithm. The positions of gears and shafts are determined to minimize the geometrical volume(size) of a gearbox, while satisfying spatial constraints between them. These steps are carried out iteratively until a desirable solution is acquired. The propose design algorithm has been applied to the preliminary design of four-stage gear drives in order to validate the availability. The design solution have shown considerably good results in both aspects of the dimensional and the configuration design.

• 한국대기환경학회지
• /
• 제9권1호
• /
• pp.101-106
• /
• 1993

In order to separate the Freon-12 and air mixture$(CF_2Cl_2/Air=0.1/99.9 vol.%)$ by pressure swing adsorption (PSA), the breakthrough curve was experimentally observed in a fixed bed adsorption column. A single adsorber was packed with various adsorbents such as, the activated carbon(S-AC, W-AC) and the molecular sieve(MS-5A, MS-13X). The order of appearance of breakthrough curve is MS-5A > MS-13X > W-AC > S-AC. The activated carbon was found to be more effective adsorbent for separating Freon-12 from the mixture than the molecular sieve was. From the experimental data obtained by the separation of Freon-12 gas out of the air stream in the steady-state PSA process cycle, whose size is the same one of column used for the breakthrough curve observation, it has been confirmed that Freon-rich gas could be obtained from the purge step of PSA and Freon-free air could be obtained from the adsorption step of PSA cycle.

• 전자공학회논문지S
• /
• 제34S권2호
• /
• pp.52-62
• /
• 1997

To reconstruct the complete 3-D shape of an object, seveal range images form different viewpoints should be merged into a single model. The process of extraction of the transformation parameters between multiple range views is calle dregistration. In this paper, we propose a new algorithm to find the transformation parameters between multiple range views. Th eproposed algorithm consists of two step: initial estimation and iteratively update the transformation. To guess the initial transformation, we modify the principal axes by considering the projection effect, due to the difference fo viewpoints. Then, the following process is iterated: in order to extract the exact transformation parameters between the range views: For every point of the common region, find the nearest point among the neighborhood of the current corresponding point whose correspondency is defined by the reverse calibration of the range finder. Then, update the transformation to satisfy the new correspondencies. In order to evaluate the performance the proposed registration algorithm, some experiments are performed on real range data, acquired by space encoding range finder. The experimental results show that the proposed initial estimation accelerate the following iterative registration step.