• Bulletin of the Society of Naval Architects of Korea
• /
• v.23 no.1
• /
• pp.3-12
• /
• 1986

This paper investigates the static configurations and the dynamic behaviors of a single point mooring line. To obtain the static configuration and static tension distribution along the mooring line, including the effect of fluid nonlinear drag and the elasticity of the line, the Runge-Kutta fourth order numerical method was used. The relationship between the horizontal excursion and the horizontal restoring force component of the mooring line, which is very important to a mooring line design, and the effect of a subsurface buoy on the static configuration are presented. In nonlinear dynamic analysis including nonlinear fluid drag acting on the line and geometrical nonlinearity for large deflections, finite element method using updated Lagrangian was used to obtain the solution. In the case of upper end harmonic excitation of the mooring line, the dynamic motion and the tension were also presented.

• Journal of the Korean Ceramic Society
• /
• v.23 no.4
• /
• pp.47-54
• /
• 1986

Since the wall mobility of bubble magnetic materials havin g the large q (q=Kac/2$\pi$$M_s^2$) like a $YFeO_3$ has been found to be proportional to the wall energy theoretically crystallographical direction dependence of wall energy calculated by the basis on the spin configuration of the bubble wall which lies in the ac plane was compared with the crystallographical direction dependence of wall mobility which was measured by the experiment. The sample was a single crystal of $YFeO_3$ which was cut into plate normal to the C axis and polished t a thickness of about 60${\mu}{\textrm}{m}$ The measurement of the wall mobility was carried out by optical system using the magneto-optic Faraday effect. From the good agreement of the crystallographical direction dependence of wall mobility and will energy it was found that the spin configuration of the bubble wall suggested is fair.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.348-350
• /
• 2018

In this paper, dispersion-managed optimal link configuration with the repetitively artificial-distributed single mode fiber lengths and residual dispersion per span, in which optical phase conjugator placed at midway, is proposed. It is confirmed that the proposed optical link configuration is suitable for expanding transmission length capable to obtain the good performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.12 no.5
• /
• pp.505-518
• /
• 1987

In this paper, the 2-level and 3-level types of PWM technique have been analyzed, and a multiprocessor has been designed as controller for these two types of PWM inverters. Designed multiprocessor employing a hierarchical structure of a SUPERVISORY PROCESSOR which interconnects three LOCAL PROCESSOR through a common memory technique has showed as elaborate digital control characteristic. Using this multiprocessor configuration the system could gain a great degree of freedom in change of software. Also software was simpler than a single processor configuration.

• Journal of Information Display
• /
• v.2 no.1
• /
• pp.1-4
• /
• 2001

We propose a dual in-plane parallel electrode structure of a vertical configuration of a helix-deformed ferroelectric liquid crystal (HDFLC) mode for better brightness than a single in-plain electrode case. This structure provides high brightness in addition to the analog gray scale capability, fast response, and wide-viewing characteristics. In contrast to a conventional HDFLC in a planar geometry, smectic layers arrange themselves parallel to the substrates and thus extremely uniform alignment of molecules in a large area is naturally achieved in our new configuration.

• IEIE Transactions on Smart Processing and Computing
• /
• v.4 no.4
• /
• pp.251-257
• /
• 2015

This work presents modelling and simulation of a readout integrated circuit (ROIC) design considering pair-wise serial configuration along with thermal modeling of an uncooled microbolometer array. A fully differential approach is used at the input stage in order to reduce fixed pattern noise due to the process variation and self-heating-related issues. Each pair of microbolometers is pulse-biased such that they both fall under the same self-heating point along the self-heating trend line. A ${\pm}10%$ process variation is considered. The proposed design is simulated with a reference input image consisting of an array of $127{\times}92$ pixels. This configuration uses only one unity gain differential amplifier along with a single 14-bit analog-to-digital converter in order to minimize the dynamic range requirement of the ROIC.

• Journal of electromagnetic engineering and science
• /
• v.16 no.2
• /
• pp.74-79
• /
• 2016

This paper proposes an optimum array configuration to improve null steering time for mobile controlled reception pattern antenna (CRPA) systems. The proposed array consists of a single reference element at the center and nine auxiliary elements arranged in a circular array. The array radius and the vertical positions of the center element are optimized using a genetic algorithm in conjunction with a constrained least-mean-square algorithm. The results demonstrate that the proposed array is suitable for mobile CRPA systems without significant side nulls in satellite directions.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.13-18
• /
• 2009

Because the existing Human-Machine Interface (HMI) for the conventional substation cannot dynamically indicate the configuration information of the Substation Automation System (SAS). In this paper, an intelligent station HMI is proposed for IEC 61850 based substation. The program of the proposed HMI not only can automatically generate the layout of single line diagram, but can also indicate the communication network and functions of IEDs by reading SCL files. It greatly helps monitor the operation status, communication network and each IED dynamically, such as failure detection in SAS. Furthermore, this paper presents the possibility of developing new software for SAS with the full use of IEC 61850-6. Once the software is complete, there is no need to change it when the substation is upgraded or when it is migrated to other IEC 61850 based substations, which is a cost-effective solution.

• Journal of Power Electronics
• /
• v.14 no.4
• /
• pp.742-753
• /
• 2014

In this paper, a new continuously and linearly controlled capacitive static VAR compensator is proposed for the automatic power factor correction of inductive single phase loads in 220V 50Hz power system networks. The compensator is constructed of a harmonic-suppressed TCR equipped with a new adaptive current controller. The harmonic-suppressed TCR is a new configuration that includes a thyristor controlled reactor (TCR) shunted by a passive third harmonic filter. In addition, the parallel configuration is connected to an AC source via a series first harmonic filter. The harmonic-suppressed TCR is designed so that negligible harmonic current components are injected into the AC source. The compensator is equipped with a new adaptive closed loop current controller, which responds linearly to reactive current demands. The no load operating losses of this compensator are negligible when compared to its capacitive reactive current rating. The proposed system is validated on PSpice which is very close in terms of performance to real hardware.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.7
• /
• pp.697-700
• /
• 2000

A method of calculating the excess Helmholtz free energy from the average of the bent effective acceptance ratio for two-center-Lennard-Jones liquids has been presented. The bent effective acceptance ratio has been newly composed from the acceptan ce ratio for the potential energy difference between a configuration in the Metropolis Monte Carlo procedure and random virtual configuration generated by the separate parallel Monte Carlo procedure and the Boltzmann factor for half the potential energy difference. The excess Helmholtz free energy was calculated directly from the average of the bent effective acceptance ratio through a single Metropolis Monte Carlo run. Because the separate parallel Monte Carlo procedure was used, this method can be applied to molecular dynamics simulations. For two-center-Lennard-Jones liquids, the average of the bent effective acceptance ratio gave better results than use of the modified effective acceptance ratio in the previous work.