• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.780-783
• /
• 2004

The two-dimensional modeling of the non-stationary thermal state and voltage responsivity of the sensitive elements usually used in solid-state pyroelectric focal plane arrays are presented. Temperature distributions under periodical thermal excitation and the response of the thermal imaging device, which is composed of the pyroelectric sensitive elements mounted on a single silicon substrate, are numerically calculated. The sensitive element consists of a covering metal layer, infrared polymer absorber, front metal contact, sensitive pyroelectric element, the interconnecting column and the bulk silicon readout. The results of the numerical modeling show that the thermal crosstalk between sensitive elements to be critical especially at low frequency (f < 10Hz) of periodically modulated light. It is also shown that the use of our models gives the possibility to improve the design, operating regimes and sensitivity of the device.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.2
• /
• pp.293-303
• /
• 2017

FIDO(Fast IDentity Online) technology is expanding very rapidly which can replace traditional password-based authentication with biometrics technology[1,7]. FIDO provides convenient authentication with biometrics technology and secure key management with smart card technology, but it does not provide user identification, thus traditional user identification technology should be used before a FIDO device is registered to a FIDO server. K-FIDO[3] is an approach to implement FIDO and certificate-based authentication technology into a single device that user can utilize certificate-based authentication in initial registration of FIDO device to FIDO server. It is expected that very shortly users will own and use multiple K-FIDO devices. If we consider the traditional approach of copying single certificate to multiple devices or issuing independent certificate to each device, there will be many complex problems. In this paper we propose more secure and convenient key management technology in multiple K-FIDO device scenario using self-extended certification[4].

• Journal of the Microelectronics and Packaging Society
• /
• v.19 no.4
• /
• pp.45-50
• /
• 2012

A family of multi-die DRAM packages was developed that incorporate the full functionality of an SODIMM into a single package. Using a common ball assignment analogous to the edge connector of an SODIMM, a broad range of memory types and assembly structures are supported in this new package. In particular DDR3U, LPDDR3 and DDR4RS are all supported. The center-bonded DRAM use face-down wirebond assembly, while the peripherybonded LPDDR3 use the face-up configuration. Flip chip assembly as well as TSV stacked memory is also supported in this new technology. For the center-bonded devices (DDR3, DDR4 and LPDDR3 ${\times}16$ die) and for the face up wirebonded ${\times}32$ LPDDR3 devices, a simple manufacturing flow is used: all die are placed on the strip in a single machine insertion and are sourced from a single wafer. Wirebonding is also a single insertion operation: all die on a strip are wirebonded at the same time. Because the locations of the power signals is unchanged for these different types of memories, a single consolidated set of test hardware can be used for testing and burn-in for all three memory types.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.3
• /
• pp.201-207
• /
• 2020

With the expansion in the use of DC power systems and increased need for system maintenance, the development of measurement devices for maintenance requires high stability. Of the different kinds of DC current measurement devices, the single-shot measurement device causes the input signal of the current measuring unit to initially generate a high inrush current. The high inrush current flows into the signal processor of the meter, shortening the life of the internal fuses and causing failure. Therefore, in this study, the I²t value for increasing the durability of the fuse is designed using the available wire diameter. Operating characteristics for 210~400% over-current of the rated current, which is relatively low over-current, are realized by the plating of low melting tin metal. As a result, a method of designing a fuse element for a DC power supply, which improves the safety of the DC current measurement device by blocking the failure caused by the inrush current, is presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.9A
• /
• pp.1348-1358
• /
• 2000

The paper contributes to a traffic analysis for the CDMA cellular base station with repeater which are operated in a cell site. Usually the repeaters' traffic of the CDMA cellular system hardly could be separated from that of the base station because the links of the repeaters are divided from RF circuits of the base station. The paper introduces a traffic measuring method that separates the traffic of repeaters from that of the base station using time delay device. To get general results we use a single BTS(Base station Transceiver Subsystem) with three repeater as well as a single BTS with a single repeater. Then we proved that the traffic of the repeaters could separate from that of the base station clearly.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07a
• /
• pp.482-485
• /
• 2002

We synthesize a (Y,Sm)BCO(its composition is (Y/Sm123+0.4Y/Sm211)+1wt%CeO$_2$) powders using polymeric complex method. (Y,Sm)BCO powders are prepared as heated at 970$^{\circ}C$. For measurement of this characterization, We measure XRD and SEM. We use TSMG method for fabricatlon of (Y,Sm)BCO single crystal. The manufactured VBCO single crystal is measured by a magnetic distribution device using 0.5 Tesla magnet. As the result of this measurement, we find that a trapped magnet fields are 550 Gauss.

• The Journal of Korea Robotics Society
• /
• v.8 no.3
• /
• pp.186-196
• /
• 2013

Since its introduction (e.g., [4, 6]), virtual coupling technique has been de facto way to connect a haptic device with a virtual proxy for haptic rendering and control. However, because of the single dependence on spring-damper feedback action, this virtual coupling suffers from the degraded transparency particularly during contact tasks when large device/proxy-forces are involved. In this paper, we propose a novel virtual coupling technique, which, by utilizing passive decomposition, reduces device-proxy position deviation even during the contact tasks while also scaling down (or up) the apparent inertia of the coordinated device-proxy. By doing so, we can significantly improve transparency between multiple degree of freedom (possibly nonlinear) haptic device and virtual proxy. In other to use passive decomposition, disturbance observer of [3] is adopted to estimate human force with some dead-zone modification to avoid "winding-up" force estimation in the presence of device torque saturation. Some preliminary experimental results are also given to illustrate efficacy of the proposed technique.

• Proceedings of the KIEE Conference
• /
• 2003.04a
• /
• pp.88-90
• /
• 2003

SRM has a characteristic of a robust, simple structure and wide operating ranges. So, recently it has studied and developed in many kinds and forms with the technology of power electronics and analysis and design by use of computer. Also, It is used in a very wide range of industrial applications. In particular, single phase switched reluctance motor has a merit in practical use because it has simple operating drives and control systems, very high energy density per unit volume comparing with three phase SRM. But it must have a starting device. In this paper design procedures of single phase SRM development for blower drives are presented. It is selected the design parameters by compared with design theory of general electric machine and poly phase SRM. Also it is simulated the designed prototype model by FEM for the prediction of characteristics.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.125-126
• /
• 2000

We report the use of fluorene based copolymers containing quinoline(POF66, PIF66) and pyridine(PFPV) units as electron transporting polymers for multi-layered LEDs. Double-layer device structure combining PIF66 as electron-transporting layer with the emissive MEHPPV showed a maximum quantum efficiency of 0.03%, which is 30 fold increased compared with ITO/MEHPPV/Al single-layer device. PFPV layer increased the quantum efficiency up to 0.1% in the device structure of ITO/(P-3:PVK)/PFPV/Al. The ETL with the electron deficient moiety improved the LED performance by the characteristics of electron transporting as well as hole blocking between emissive layer and metal cathode.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.10
• /
• pp.4886-4907
• /
• 2019

The use of mobile devices is increasing in multimedia applications. The multimedia contents are delivered to mobile users over heterogeneous networks. Due to fluctuation in bandwidth and user mobility, the service providers are facing difficulties in providing Quality of Service (QoS) guaranteed delivery for multimedia applications. Multimedia applications depend on QoS parameters such as delay, bandwidth, and jitter to offer better user experience. The existing schemes use the single source and multisource delivery but are unable to balance between stream quality and network congestion for mobile users. We proposed a Quality Oriented Multimedia Content Delivery Scheme (QOMCDS) for the mobile cloud to deliver better quality multimedia contents for the mobile user. The multimedia contents are delivered to the mobile device based on the device's parameters and network environment. The objective video quality assessment models like Peak Signal-to-Noise Ratio (PSNR), Structural Similarity (SSIM), and Video Quality Measurement (VQM) are used to measure the quality of the video. The client side Quality of Experience metric such as Startup delay, Rebuffering events, and Bitrate switch count was used for evaluation. The proposed scheme is evaluated using dash.js and is compared to existing schemes. The results show significant improvement over existing multimedia content delivery schemes.