• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.3
• /
• pp.356-364
• /
• 2009

The current ruminant feeding models require parameterization of the digestion kinetics of carbohydrate fractions in feed ingredients to estimate the supply of nutrients from a ration. Using an automated gas production technique, statistically welldefined digestion rate of carbohydrate, including soluble carbohydrate, can be estimated in a relatively easy way. In this study, the gas production during in vitro fermentation was measured and recorded by an automated gas production system to investigate degradation kinetics of carbohydrate fractions of a wide range of ruminant feeds: corn silage, rice straw, corn, soybean hull, soybean meal, and cell mass from lysine production (CMLP). The gas production from un-fractionated, ethanol insoluble residue and neutral detergent insoluble residue of the feed samples were obtained. The gas profiles of carbohydrate fractions on the basis of the carbohydrate scheme of the Cornell Net Carbohydrate and Protein System (A, B1, B2, B3 and C) were generated using a subtraction approach. After the gas profiles were plotted with time, a curve was fitted with a single-pool exponential equation with a discrete lag to obtain kinetic parameters that can be used as inputs for modern nutritional models. The fractional degradation rate constants (Kd) of corn silage were 11.6, 25.7, 14.8 and 0.8%/h for un-fractioned, A, B1 and B2 fractions, respectively. The values were statistically well estimated, assessed by high t-value (>12.9). The Kd of carbohydrate fractions in rice straw were 4.8, 21.1, 5.7 and 0.5%/h for un-fractioned, A, B1 and B2 fractions, respectively. Although the Kd of B2 fraction was poorly defined with a t-value of 4.4, the Kd of the other fractions showed tvalues higher than 21.9. The un-fractioned corn showed the highest Kd (18.2%/h) among the feeds tested, and the Kd of A plus B1 fraction was 18.7%/h. Soybean hull had a Kd of 6.0, 29.0, 3.8 and 13.8%/h for un-fractioned, A, B1 and B2, respectively. The large Kd of fraction B2 indicated that NDF in soybean hull was easily degradable. The t-values were higher than 20 except for the B1 fraction (5.7). The estimated Kd of soybean meal was 9.6, 24.3, 5.0%/h for un-fractioned, A and B1 fractions, respectively. A small amount of gas (5.6 ml at 48 ho of incubation) was produced from fermentation of CMLP which contained little carbohydrate. In summary, the automated gas production system was satisfactory for the estimation of well defined (t-value >12) kinetic parameters and Kd of soluble carbohydrate fractions of various feedstuffs that supply mainly carbohydrate. The subtraction approach, however, should be applied with caution for some concentrates, especially those which contain a high level of crude protein since nitrogen-containing compounds can interfere with gas production.

• The Korean Journal of Pesticide Science
• /
• v.12 no.1
• /
• pp.34-42
• /
• 2008

In order to know the residual pattern of some pesticides and predict to the degradation period until below MRL, we experimented chlorothalonil, indoxacarb, lufenuron, metalaxyl and methomyl for Chinese cabbage. They were frequently detected pesticides in Chinese cabbage by NAQS (National Agricultural product Quality management Service) monitoring survey. In this experiment, we sprayed those pesticides 10days before harvest and analyzed 0, 1, 2, 3, 5, 7, 10 day samples to establish logical equation and to calculate $DT_{50}0$. During the cultivating period, the residue amount of chlorothalonil was changed from $55.58\;mg\;kg^{-1}$ (0 day) to $20.08\;mg\;kg^{-1}$ (10 day), $DT_{50}$ was 7.45 days, indoxacarb was $7.85\;mg\;kg^{-1}$ (0 day) to $1.46\;mg\;kg^{-1}$ (10 day), and 4.2 days, lufenuron was $1.57\;mg\;kg^{-1}$ (0 day) to $0.49\;mg\;kg^{-1}$ (10 day), and 5.85 days, metalaxyl was $8.12\;mg\;kg^{-1}$ (0 day) to $0.10\;mg\;kg^{-1}$ (10 day), and 175 days, and methomyl was $11.51\;mg\;kg^{-1}$ (0 day) to $0.80\;mg\;kg^{-1}$ (10 day), and 2.42 days at single dose application, respectively. The $DT_{50}$ of double amount in those pesticides were 9.05 days in chlorothatonil, 7.09 days in indoxacarb, 8.82 days in lufenuron, 3.32 days in metalaxyl, and 2.72 days in methomyl, respectively.

• Journal of fish pathology
• /
• v.25 no.2
• /
• pp.95-101
• /
• 2012

The residue levels of sulfadimethoxine (SDM) was studied after oral administration to cultured olive flounder, Paralichthys olivaceus at $20{\pm}1.0^{\circ}C$. The concentrations of SDM in the plasma and liver were determined by HPLC-UV detector after a single dosage of 400 mg/kg body weight. The average recoveries of SDM in spiked samples between 2~50 ppm were 92.24~93.62% for plasma and 88.34~91.90% for liver. Limit of detection for SDM was 0.05 ppm by using this method. Samples were taken at 1 h, 6 h, 12 h, 24 h, 48 h, 72 h, 168 h, 240 h, 336 h and 480 h post-dose. The peak plasma and liver concentrations of SDM, which attained at 1 h post-dose, was $402.64{\pm}59.66{\mu}g/ml$ and $238.18{\pm}54{\mu}g/g$, respectively. Thereafter, it's elimination from both tissues was considerably faster following process of time. Their concentrations of SDM were not measurable at 480 h post-dose. Based on this results, dosage and withdrawal times for SDM could be used when it is prescribed with SDM in olive flounder.

• Microbiology and Biotechnology Letters
• /
• v.26 no.2
• /
• pp.179-186
• /
• 1998

Dextransucrase hyper-producing Leuconostoc mesenteroides B-512FMCM and dextransucrase constitutive mutants B-742CB and B-1355C catalyzed the transfer of glucose from sucrose to other carbohydrates which were present or were added to the reaction digests. When the acceptor was a maltose, gentiobiose, lactose or raffinose, there was produced a series of oligosaccharide acceptor products or single product based on the kinds of enzymes and reaction conditions. To obtain the quantitative information about the yield and the distribution of acceptor products and dextran two experimental parameters were studied: a) the ratio of acceptor to sucrose and b) the amount of enzyme at constant carbohydrate concentration (100 mM). As the amount of enzyme increased, the synthesis of acceptor products (of maltose or gentiobiose) increased, and the formation of dextran decreased. As the ratio of acceptor to sucrose increased, the amount of dextran and the number of acceptor-products decreased and the amount of acceptor-products increased. When maltose or gentiobiose was an acceptor, the glucose from sucrose was transferred to the C-6 hydroxyl group of the nonreducing-end glucose residue of accepters to give a homologous series of isomaltosyl dextrins. In case of lactose or raffinose, there was produced only one acceptor product from B-512FMCM dextransucrase reaction. In the lactose acceptor reaction, the glucose from sucrose was transferred to the C-2 hydroxyl of the reducing end glucose residue of lactose. To get a series of oligosaccharides from lactose or raffinose acceptor reaction we used B-742CB dextransucrase or B-1355C alternansucrase with 500 mM sucrose in reaction digest.

• Microbiology and Biotechnology Letters
• /
• v.39 no.3
• /
• pp.245-251
• /
• 2011

[ ${\alpha}$ ]Galactosidase was purified from a culture filtrate of Mortierella sp. by CM-sephadex C-50, and subsequent Sephadex G-100 column chromatography. The final preparation thus obtained showed a single band on SDS-polyacrylamide gel electrophoresis. The molecular weight was determined to be 56 kDa. $Gal^3Man^4$ ($6^3$-mono-O-${\alpha}$-D-galactopyranosyl-4-O-${\beta}$-D-mannotetraose), $Gal^{2,3}Man_5$ ($6^{2,3}$-di-O-${\alpha}$-D-galactopyranosyl-4-O-${\beta}$-D-mannopentaose), $Gal_2Man_3$ ($6^2$-mono-O-${\alpha}$-D-galactopyranosyl-4-O-${\beta}$-D-mannotriose), $Gal^2Man_6$ ($6^2$-mono-O-${\alpha}$-D-galactopyranosyl-4-O-${\beta}$-D-mannohexaose) and $Gal^2Man_5$ ($6^2$-mono-O-${\alpha}$-D-galactopyranosyl-4-O-${\beta}$-D-mannopentaose), prepared from 3 types of microbial ${\beta}$-mannnanase, were used as substrates. $Gal^3Man_4$ and $Gal^2Man_3$ had a stubbed ${\alpha}$-galactosyl residue on the $2^{nd}$ and $3^{rd}$ mannose from the reducing end of mannotetraose and mannotriose, thus ${\alpha}$-galactosidase showed a preference for stubbed ${\alpha}$-galactosyl residue. ${\alpha}$-Galactosidase hydrolyzed $Gal^3Man_4$ more rapidly than $Gal^2Man_3$. However, ${\alpha}$-galactosidase hardly acted on $Gal^{2,3}Man_5$, $Gal^2Man_6$ or $Gal^2Man_5$. The enzyme hydrolyzed melibiose to galactose and glucose, raffinose to galactose and sucrose, and also stachyose to galactose and raffinose.

• Korean Journal of Environmental Agriculture
• /
• v.16 no.4
• /
• pp.285-290
• /
• 1997

This study was conducted to develop labor-saving pesticide-fertilizer mixed formulation through a single application of mixed formulation of an insecticide imidacloprid coated on a slow release urea. The release of both total nitrogen and imidacloprid into water was delayed with increasing adhesive.Imidacloprid was released out 95% within 24 hours, whereas total nitrogen released in mixed formulation until 40 days was released less extent by increasing adhesive. There was no difference between pesticide-fertilizer mixed formulation and coated urea thereafter. The content of $NH_4-N$ in the soil treated with pesticide and urea seperating was higher until 10 days but gradually decreased compare to that of pesticide-fertilizer mixed formulation or coated urea. The population density of nitrate reducing bacteria and denitrifying bacteria in soil after treatment were lower in the pesticide-fertilizer mixed formulation and coated urea than those of pesticide and urea separate treatment. The residue of imidacloprid in soil was slightly higher in the treatment of pesticide alone than the pesticide-fertilizer mixed formulation and pesticide and urea seperating treatment. The population and control efficacy of small brown planthopper, Laodelphax striatellus, were not significance different among treatments.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.17 no.2
• /
• pp.81-92
• /
• 2009

This study investigated the occurrence of residues derived animals produced during the process of slaughter and the subsequent channels of processing those residues derived animals; the status of recycling of these residues derived animals by recycling business is investigated to utilize the results as the basic data for management purposes. At present, animal slaughter is highly specialized and the residues derived animals obtained from the slaughter of animals are separated and dissected into different parts to serve as fodder and residual compost. Some of the residues derived animals obtained from slaughter, which are edible are utilized for edible purposes and those parts which are not edible such as horns, claws, fats etc. are confirmed to be recycled. Poultry residues derived animals are mostly recycled as single-component feed, used as original forms, residual compost whereas fish remains are recycled mostly as singlecomponent feed etc. Most of the companies that recycle residues derived animals are situated in provinces such as Jeollanamdo, Jeollabukdo, Gyeongsangnamdo, Gyeongsangbukdo, where many of the slaughterhouses are located. And many of these recylcing business find themselves in the vicinity of these slaughterhouse. Majority of these slaughterhouse are capable of processing residues derived animals in the range of 10~60 ton/day, which is quite small in terms of processing capacity. The problem encountered in the recycling of the residues derived animals is the occurrence of foul smell caused by the decomposition, for which appropriate measures have to be taken. The residues derived animals are on many occasions directly collected and transported to save costs and secure required amount of residues derived animals.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.1
• /
• pp.25-32
• /
• 2007

We investigated the silicide reaction stability between 10 nm-Col-xNix alloy films and silicon substrates with the existence of 4 nm-thick natural oxide layers. We thermally evaporated 10 nm-Col-xNix alloy films by varying $x=0.1{\sim}0.9$ on naturally oxidized single crystal and 70 nm-thick polycrystalline silicon substrates. The films structures were annealed by rapid thermal annealing (RTA) from $600^{\circ}C$ to $1100^{\circ}C$ for 40 seconds with the purpose of silicidation. After the removal of residual metallic residue with sulfuric acid, the sheet resistance, microstructure, composition, and surface roughness were investigated using a four-point probe, a field emission scanning electron microscope, a field ion bean4 an X-ray diffractometer, and an Auger electron depth profiling spectroscope, respectively, to confirm the silicide reaction. The residual stress of silicon substrate was also analyzed using a micro-Raman spectrometer We report that the silicide reaction does not occur if natural oxides are present. Metallic oxide residues may be present on a polysilicon substrate at high silicidation temperatures. Huge residual stress is possible on a single crystal silicon substrate at high temperature, and these may result in micro-pinholes. Our results imply that the natural oxide layer removal process is of importance to ensure the successful completion of the silicide process with CoNi alloy films.

• IMMUNE NETWORK
• /
• v.20 no.5
• /
• pp.41.1-41.11
• /
• 2020

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV2) is a positive-sense single-stranded RNA (+ssRNA) that causes coronavirus disease 2019 (COVID-19). The viral genome encodes twelve genes for viral replication and infection. The third open reading frame is the spike (S) gene that encodes for the spike glycoprotein interacting with specific cell surface receptor - angiotensin converting enzyme 2 (ACE2) - on the host cell membrane. Most recent studies identified a single point mutation in S gene. A single point mutation in S gene leading to an amino acid substitution at codon 614 from an aspartic acid 614 into glycine (D614G) resulted in greater infectivity compared to the wild type SARS-CoV2. We were interested in investigating the mutation region of S gene of SARS-CoV2 from Korean COVID-19 patients. New mutation sites were found in the critical receptor binding domain (RBD) of S gene, which is adjacent to the aforementioned D614G mutation residue. This specific sequence data demonstrated the active progression of SARS-CoV2 by mutations in the RBD of S gene. The sequence information of new mutations is critical to the development of recombinant SARS-CoV2 spike antigens, which may be required to improve and advance the strategy against a wide range of possible SARS-CoV2 mutations.

• Journal of Food Hygiene and Safety
• /
• v.33 no.4
• /
• pp.310-315
• /
• 2018

Under the "Positive List System (PLS)," a uniform limit of 0.01 mg/kg is applied if the agricultural product does not have a Maximum Residue Limit (MRL) for a pesticide. The purpose of this research is to conduct residual pesticide monitoring on tropical fruits distributed in Gyeonggi-do to investigate the effects of PLS and provide basic materials for establishing MRLs of residual pesticides for tropical fruits produced in Korea. By inspecting 120 tropical fruits distributed in Gyeonggi-do according to Multi-class pesticide multi-residue methods, we detected sevenfruits from threekinds of banana, mangoes, and kiwis with six different residual pesticides. Azoxystrobin and chlorpyrifos were detected from bananas, chlorfenapyr from mangoes, and chlorothalonil, iprodione, and procymidone from kiwis. A single case of chlorfenapyr and chlorothalonil was found with a mango and a kiwi produced in Korea, respectively, and by applying PLS we found that they exceeded the MRL of residual pesticide. Thus, it is necessary to set the MRL of residual pesticides for tropical fruits produced in Korea.