• 대한치과보철학회지
• /
• 제37권3호
• /
• pp.375-382
• /
• 1999

The purpose of this article is to present the clinical and laboratory procedures for single tooth restoration using 'Combination Implant Crown'. It is cemented on implant abutment and that abutment is screw-retained over implant body. This type of implant restorations has the advantages of cement-retained restoration while being antirotational and retrievable. And, more esthetic and functional result can be achieved by minimizing the size of access hole. The results were as follows : 1. Preparation of abutment below the cuff line should be avoided 2. Axial reduction of implant abutment should not be excessive because it may weaken the abutment 3. More esthetical and functional occlusal surface was achieved with a minimal access hole which is slightly larger than the diameter of hex driver to enable future total retrievability. 4. Combination Implant Crown has the advantages of both the cement-retained and screw-retained type implant restoration. 5. Cementation between implant crown and abutment reduces screw loosening through even force distribution

• 대한치과보철학회지
• /
• 제43권3호
• /
• pp.331-337
• /
• 2005

For a missing teeth, orthodontic treatment may be a better choice of treatment in comparison to a conventional prosthetic replacement such as FPD, resin bonded prosthesis in view of aesthetics, periodontal health and function. Occasionally after an orthodontic treatment, an insufficient space may occur. The mini-implant could be an alternative in situations of narrow ridge dimension, where conventional root form implant could be compromised. The aim of this clinical report is to describe how a space that could not be restored with a traditional root form endosteal implant was managed and to present a technique to achieve optimal anterior esthetics in single implant restoration.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.540-545
• /
• 1997

This paper is to evaluate the stress distibution and displacements around the single implant restoration in dentisry. The computer simulation technique using FEM was applied to the analysis, and four londing inclination were studied: verical(0 .deg.),15 .deg.,30 .deg.,45 .deg. with respect to implant axis. The magnitudes of occlusal force were 100N, 200N, 300N, 400N, and 500N. The computed result shows that the stress on a single implant restoration increases as the load or the inclined angel increases, and that the change in loading inclination has a greater effect on the stress distribution than that of the load magnitude.

• The Journal of Advanced Prosthodontics
• /
• 제1권3호
• /
• pp.140-144
• /
• 2009

STATEMENT OF PROBLEM. Little information is available about the buccal gingival level of multiple implant restorations. PURPOSE. This study was aimed to evaluate the relationship between width and height of buccal soft tissue around single and 2 adjacent implant restorations. MATERIAL AND METHODS. Four implant restoration groups (first and second molars, single second molars, posterior single restorations between teeth, and anterior single restorations between teeth) were randomly chosen from one dental institute. Each group comprised of 6 patients. After 6 months of function, silicone impressions were taken and stone models were fabricated for each restoration group. The stone models were cut in bucco-lingual direction at the most apical point of buccal gingival margin. The height and width of buccal supra-implant soft tissue were measured. One way ANOVA and Tukey HSD post hoc tests were performed to analyze the data obtained (P < .05). RESULTS. The most unfavorable width-height ratio was noted for the group, which was comprised of the second molar in the multiple adjacent (first and second molar) implant-supported restorations. The group also resulted in the shorter height of buccal supra-implant mucosa rather than that of anterior single implant restorations between natural teeth. CONCLUSION. To achieve a favorable level of buccal gingival margin, greater thickness of buccal supra-implant mucosa is required for the implant restorations without a neighboring natural tooth compared to the implant restorations next to a natural tooth.

• 대한심미치과학회지
• /
• 제16권2호
• /
• pp.7-18
• /
• 2007

There is now an increased demand for harmony between the peri-implant gingiva and adjacent dentition. In the event of a pending loss of a single tooth in the aesthetic zone with healthy periodontium, expectation for optimal gingival and prosthodontic aesthetics are often very high. Unfortunately, bone resorption is common following the removal of an anterior tooth, compromising the gingival tissue levels for the eventual implant restoration. Also, improper implant placement and inadequate osseous-gingival support potentially deleterious aesthetic result. The creation of an esthetic implant restoration with gingival architecture that harmonizes with the adjacent dentitionis formidable challenge. The predictability of the peri-implant esthetic outcome may ultimately be determined by the patient's own presenting anatomy rather than the clinician's ability to manage state-of-the-art procedures. To more accurately predict the peri-implant esthetic outcome before removing a failing tooth, a considering of diagnostic keys is essential. This presentation addresses the useful diagnostic keys that affect the predictability of peri-implant gingival aesthetics and the overcoming of the risk factors in anterior single-tooth replacement; it also describes a surgical and prosthodontic technique in achieving a long term successful esthetic outcome. Proper diagnosis and understanding of the biological and periodontal variables of failing dentition and their response to surgical and prosthodontic procedures are the essence of predictability. Using a smart protocol that alters the periodontium toward less risk and more favorable assessment of the diagnostic keys before implant placement will provide the most predictable esthetic outcome. Simple diagnostic keys suggested this presentation are useful method to evaluate the overcoming of the risk factors in anterior single implant restoration.

• International Journal of Oral Biology
• /
• 제46권4호
• /
• pp.200-207
• /
• 2021

In case of gingival recession and alveolar bone defects due to tooth loss for a long period of time in a single tooth in the maxillary anterior region, it is not easy to obtain aesthetic results with a single implant prosthesis. For aesthetic restoration, it is important to preserve hard and soft tissues through alveolar bone augmentation as well as restore harmony with adjacent teeth and soft tissues by placing the implant in an ideal location. In this case, an implant was placed using guided bone regeneration and a connective tissue graft simultaneously with immediate implantation after extraction from the maxillary anterior region where only residual root was left for a long period of time.

• 대한치과보철학회지
• /
• 제39권3호
• /
• pp.306-312
• /
• 2001

Achieving an aesthetic implant-supported restoration in the single tooth missing case can be challenging when the implant site is in e anterior region. The objective of this report is to focus on presurgical evaluation of implant site and systematic development of related prosthetic modalities. An accurate diagnostic evaluation, a systematically developed pesurgical plan, and knowledge and clinical skill of the various related therapeutic modalities are indispensible. Collection of patient's information, appropriate abutment selection, soft tissue contour, implant axis, and occlusion need to be discussed for aesthetic clinical outcome. For aesthetic restoration, such as surgical guide stent for precise implant positioning customized provisional restoration for development of optimal periimplant soft tissue contours, and fabrication customized abutment (mesiostructure) for veriable emergence profile, are recommended.

• 대한치과보철학회지
• /
• 제56권4호
• /
• pp.354-359
• /
• 2018

상악 전치부의 단일 임플란트 수복 치료 시, 치은 퇴축 및 골결손 문제를 가질 경우 임플란트 보철의 심미적인 결과를 얻는 것은 쉽지 않다. 장기적으로 심미적 안정성이 유지되기 위해서는 임플란트를 이상적인 위치에 식립하는 것이 중요하며 연조직의 회복 및 보철물과의 조화가 중요하다. 이러한 심미성이 더욱 요구되는 임플란트 보철물의 제작 시 이상적인 임플란트의 위치 뿐만 아니라, 주변 연조직과의 조화 역시 중요하다. 본 증례에서는 상악 전치부에서 골결손과 치은 퇴축이 진행된 47세 남자환자에서 골유도재생술 및 치은재형성술을 통해 심미 임플란트 치료를 진행하였다.

• 대한치과보철학회:학술대회논문집
• /
• 대한치과보철학회 2006년도 춘계학술대회 및 제3차 한일 공동 국제 학술대회
• /
• pp.97-97
• /
• 2006

• 대한치과보철학회지
• /
• 제62권3호
• /
• pp.234-242
• /
• 2024

즉시 임플란트 식립과 수복은 치료 기간을 단축하고, 최종 수복 시까지 심미성을 유지할 수 있다는 장점이 있다. 하지만 상악 전치부에서의 단일 임플란트 수복은 심미적인 부분에서 어려움이 있을 수 있는데, 임플란트 식립 중 연조직과 경조직에 전달된 수술적 외상은 향후 심미적 결과에 영향을 미칠 수 있다. 이러한 전치부 임플란트 식립 및 수복 시 예측 가능한 결과를 얻기 위해서는 치간골의 높이, 치은의 특성, 환자 치아의 형태적 특성 등을 고려하여 수술 및 수복 계획을 세워야 한다. 본 증례에서는 경제적 문제로 PFM (Porcelain Fused-Metal) 수복을 원하는 환자의 계획보다 순측으로 식립된 상악 전치부 임플란트를 치은 형성과 디지털 인상을 통해 emergence profile 과 안정화된 연조직 형태를 재현하고자 했다.