• Restorative Dentistry and Endodontics
• /
• v.27 no.5
• /
• pp.521-529
• /
• 2002

The purpose of this study was to compare the shaping time of two shaping methods and the leakage of three different obturation techniques. Ninty three canaled human molar teeth were used, which were randomly divided into two groups of forty teeth each and ten control teeth. After working length determination, the one group was prepared crown-down technique using rotary root canal instruments of GT rotary files .12/20, .10/20, .08/20 and .06/20 taper(Maillefer Instrument SA. Switzerland). The other group was instrumented with Gates Glidden burs(#1, #2, and #3) to coronal preparation and GT rotary files .08/20 and .06/30 taper to apical preparation. Shaping time was measured. After root canals were instrumented, they were divided to three subgroups and obturated as follows : Subgroup 1, obturated with single cone method Subgroup 2, obturated with lateral condensation : Subgroup 3, obturated with continuous wave technique. Three subgroups were obturated using non-standardized gutta-percha cone(Diadent, Korea, .06 or .08 taper) and AH-26(Dentsply DeTrey, Germany) as a root canal cement. Ten unobturated teeth served as positive and negative controls. After immersion in 2% methylene blue solution for 1 month, the teeth were washed during 24h. The teeth were demineralized in 10% nitric acid and dehydrated by immersion in 80, 90 and 100% ethyl alcohol. The teeth were finally cleared and stored in 100% methylsalicylate, and apical dye penetration was evaluated under stereomicroscope(Leica M420, LC, U.S.A)at $\times$8.75 magnification. Liner measurement of dye penetration was assessed with the use of digitalized image analysing system (analySIS, GmbH, Germany) The data were analysed statistically using independent T-test and Two-way ANOVA and Tukey test. The result were as follows 1. In canal prepared with GT$^{TM}$ rotary file, shaphing time taked more than the group of using Gates Glidden drill to coronal preparation without statistical significance (p>0.05) 2. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files showed significantly more apical leakage than those of lateral condensation and continuous wave technique regardless of shaping method (p<0.05). 3 The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed significantly more apical leakage than those of continuous wave technique regardless of shaping method (p<0.05). 4. Regardless of shaping method, The group of continuous wave obturation showed less apical leakage than those of lateral condensation without statistical significance (p>0.05). 5. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed more apical leakage than the group of lateral condensation using same shaping method with-out statistical significance (p＞0.05).

• Journal of Dental Rehabilitation and Applied Science
• /
• v.30 no.2
• /
• pp.121-130
• /
• 2014

Purpose: To assess the surface profile of dentinal wall, dentin chips and smear layer during the canal shaping with rotary (ProTaper) and ProFile and reciprocating (WaveOne) nickel-titanium file. Materials and Methods: Sixty human extracted mandibular premolars and incisors with single canals were randomly selected. Three experimental groups (n = 20) were instrumented with ProTaper (F2), ProFile (25/.06), WaveOne (25/.08) with irrigation of 2.5% NaOCl. The dentin chips were collected from flute of file during each canal preparation. After canal preparation, roots were grinded and each group was divided into two subgroups (n = 10) for surface profile and smear layer of dentinal wall of shaped root canal. Each specimen was observed under scanning electron microscope for evaluating size of dentin chips, root canal surface recessions and smear layer. Scores of Smear layer were statistically analyzed using Kruskal Wallis test and Mann Whitney test at P = 0.05 level. Results: The size of dentin chips from ProFile, ProTaper and WaveOne was up to $7{\mu}m$, $6.5{\mu}m$, and$4{\mu}m$, respectively. In the surface profile, the width of surface irregularity was measured and Profile, ProTaper and WaveOne was up to $150{\mu}m$, $70{\mu}m$, and $80{\mu}m$, respectively. Completely cleaned root canals were not found. In the middle and apical third of the canals, WaveOne group showed higher smear layer score than ProFile and ProTaper groups (P < 0.05). Conclusion: Within limits of this study, reciprocating motion WaveOne group was not significant difference of shaping ability with the full-sequence ProFile and ProTaper systems except canal clearness of middle and apical third of root canal. When using WaveOne to shaping root canal, thorough root canal irrigation is recommended.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1165-1168
• /
• 1998

This paper describes a 72-word by 32-bit 2-read/1-write multi-port register file, which is suitable for 32-bit RISC/DSP microprocessors. To minimize area and achieve high speed, advanced single-ended sense amplifiers are used. Each part of circuit is optimized at transistor level. The verification of functionality and timing is performed using HSPICE simulations. After modeling and validating the circuit at transistor level, it was laid out in a 0.6um 1-poly 3-metal layer CMOS technology. The simulation results show maximum operating frequency is 179MHz in worst case conditions. It contains 27,326 transistors and the size is 3.02mm by 2.20mm.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.3
• /
• pp.128-135
• /
• 2010

Recently complexity of embedded software cause to be used real-time operating system (RTOS) to implement various functions in the embedded system. And also, according to requirement of complex functions in embedded systems, the number as well as complexity of tasks get increased continuously. In case that many tasks collaborated in a microprocessor, context switching time between tasks is a overhead waisting a CPU resource. Therefore the time of task context switching is an important factor that affects performance of RTOS. In this paper, we concentrate on the improvement of task context switch for reducing overhead and achieving fast response time in RTOS. To achieve these goal, we suggest multiple register files and task context switching algorithm. By reducing the context switch overhead, we try to ease scheduling and assure fast response times in multitasking environment. As a result, the context switch overhead decreased by 8~16% depend on the number of register files, and some task set which are not schedulable with single register file are schedulable due to that decrease with multiple register files.

• Proceedings of the KACD Conference
• /
• 2001.11a
• /
• pp.563.1-563
• /
• 2001

The purpose of this study was to evaluate the effects of EDTA and pulsed Nd:YAG laser on apical of canal obturation. Forty-eight single-rooted teeth were used in thes study. The teeth were instrumented up to a size 40 K-file and irrigated with 2.5％ NaOCl between each file size. And the teeth were divided into 4 groups. In group A, the root canals were irrigated with a final flush of 5ml 2.5％ NaOCl as a control group.(omitted)

• Restorative Dentistry and Endodontics
• /
• v.13 no.2
• /
• pp.253-263
• /
• 1988

In order to study the cleansing effect of air-driven sonic system, the author prepared root canals on 48 extracted human permanent single rooted teeth using hand instrumentation and aforementioned method, half and half of the cases. In order for comparison of the degree of remnant debris and cleanliness, the cross sections at 3mm and 7mm levels from the apex were stereomicroscopically observed and scored in accordance with predetermined degree. The obtained results were as follows: 1. Air-driven sonic system was more effective in cleansing root canal than hand instrumentation at apical 3mm level. (p < 0.01) 2. Air-driven sonic system was more effective in cleansing root canal than hand instrumentation at apical 7mm level. (p < 0.01) 3. In hand instrumentation, Helisonic file was more effective in cleansing root canal than Rispisonic file. (p < 0.05) In air-driven sonic system, on the other hand, there were no significant difference between the two files.

• Journal of the Korea Society for Simulation
• /
• v.12 no.2
• /
• pp.25-34
• /
• 2003

Because of explosive growth in demand for web-based multimedia applications, proper proxy caching for large multimedia object (especially video) has become needed. For a video object which is much larger in size and has different access characteristics than the traditional web object such as image and text, caching the whole video file as a single web object is not efficient for the proxy cache. In this paper, we propose a proxy caching strategy with the constant-sized segment for video file and an improved proxy cache replacement policy. Through the event-driven simulation under various conditions, we show that our proposal is more efficient than the variable-sized segment strategy which has been proven to have higher hit ratio than other traditional proxy cache strategies.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.235-237
• /
• 2018

The Internet has allowed many things to move fast, including sharing of data, files and others within a second. Many domains use applications range from IoT, smart cities, healthcare, and organizations to share the data when necessary. However, there are some challenges faced by existing systems that works on centralized nature. Such challenges are data breach, trustiness issue, unauthorized access and data fraud. Therefore in this work, we focus on using a smart contract which is used by blockchain platform and works on decentralized form. Furthermore, in this work our contract provides an access to the file uploaded onto the decentralized storage such as IPFS. By leveraging smart contract-role based which consist of a contract owner who can manage the users when access the certain resources such as a file and as well as use of decentralized storage to avoid single point of failure and censorship over secure communication channel. We checked the gas cost of the smart contract since most of contracts tends to be a high cost.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2009.11a
• /
• pp.943-944
• /
• 2009

본 논문은 임의의 호스트의 실행 환경과 리소스에 대한 변경 없이 독립적으로 응용 프로그램 수준의 가상화를 제공하는 단일 실행 파일을 가지는 이동형 SW의 제공 방법에 대하여 소개한다. 이는 실행 포맷 변환기를 통하여 설치형 SW에서 추출된 이동형 SW 정보를 본 논문에서 제공하는 응용 파일 시스템에 구축하고, 이를 실행하기 위하여 윈도우 기반 시스템에서 사용자 레벨의 라이브러리 후킹 기술을 이용한 가상 실행 라이브러리와, 이 가상 실행 라이브러리를 실제 구동되는 이동형 SW 프로세스에 바인딩하여 실행시키게 하는 실행 엔진 모두를 하나의 파일에 제공하는 방법 대하여 기술한다

• Restorative Dentistry and Endodontics
• /
• v.38 no.1
• /
• pp.21-25
• /
• 2013

Objectives: The aim of this study was to evaluate the shaping ability of newly marketed single-file instruments, Wave One (Dentsply-Maillefer) and Reciproc (VDW GmbH), in terms of maintaining the original root canal configuration and curvature, with or without a glide-path. Materials and Methods: According to the instruments used, the blocks were divided into 4 groups (n = 10): Group 1, no glide-path / Wave One; Group 2, no glide-path / Reciproc; Group 3, #15 K-file / Wave One; Group 4, #15 K-file / Reciproc. Pre- and post-instrumented images were scanned and the canal deviation was assessed. The cyclic fatigue stress was loaded to examine the cross-sectional shape of the fractured surface. The broken fragments were evaluated under the scanning electron microscope (SEM) for topographic features of the cross-section. Statistically analysis of the data was performed using one-way analysis of variance followed by Tukey's test (${\alpha}$ = 0.05). Results: The ability of instruments to remain centered in prepared canals at 1 and 2 mm levels was significantly lower in Group 1 (p < 0.05). The centering ratio at 3, 5, and 7 mm level were not significantly different. Conclusions: The Wave One file should be used following establishment of a glide-path larger than #15.