• Journal of The Korean Society of Agricultural Engineers
• /
• v.47 no.3
• /
• pp.29-37
• /
• 2005

This study was carried out to file up structural design data for optimizing Pleurotus eryngii growing houses. Design data are including current farm status of Pleurotus eryngii growing houses in the aspect of structural configuration as well as environmental conditions to be controlled and maintained inside. A structural analysis was performed for the on-farm structures as well as some structures modified and suggested through field survey and analysis. The results are summarized as follows. According to the results of status analysis, Pleurotus eryngii growing houses were categorized as arch-roofed simple type and sandwich panel type. Though the size of Pleurotus eryngii cultivation facilities were considerably diverse, the basic dimensions of Pleurotus eryngii cultivation facilities showed relatively similar pattern: more or less of 20m of length, $6.6\~7.0m$ of width, $4.6\~5.0m$ of peak height, $1.2\~1.6m$ of bed width, and 4 layers of bed. In the aspect of spatial use of cultivation facilities, suggested models were shown to be mostly reasonable in the aspect of heating and cooling, micro-meteorological stability, land use efficiency per unit floor area, etc.. Especially, the standard models suggested so far were thought to be not efficient in its surface area and spatial volume per unit floor area as well as its uneffective structural design in the area around ceiling. In the results of structural analysis for the models suggested through this study by using those section frames to be found on farms, the panel type structures of both single span and double span were estimated to be over designed, whereas arch-roofed pipe houses were mostly found to be under-designed.

• Journal of the Korea Society of Computer and Information
• /
• v.10 no.5 s.37
• /
• pp.313-322
• /
• 2005

In this paper, we implement and verify performance monitor for parallel signal processing system, using DSP Starter Kit(DSK) of which the basic Processor is TMS302C6711 chip. The key ideas of this performance monitor is, using Real Time Data Exchange(RTDX) for the Purpose of real-time data transfer and function of DSP/BIOS, the ability to measure the Performance measure like DSP workload, memory usage, and bridge traffic. In the simulation, FFT, 2D FFT, Matrix Multiplication, and Fir Filter, which are widely used DSP algorithms, have been employed. Using performance monitor and Code Composer Studio from Texas Instrument(Tl) , the result has been recorded according to different frequencies, data sizes, and buffer sizes for a single wave file. The accuracy of our performance monitor has been verified by comparing those recorded results.

• Proceedings of the KOSOMBE Conference
• /
• v.1992 no.11
• /
• pp.103-104
• /
• 1992

Automatic transmission of data from the blood analyzer to the request site is one of the most important part in hospital computerization. We have developed a system to automatically transmit the data from the atrial blood gas analyzer. In this system, HOST computer, FILE server, LAN(Local Area Network), 3270 Emulator and Multi-port card were integrated. Also, 3 blood gas analyser(NOVA Inc., USA) were connected to a single multi-port card which is attached in a personal computer for data acquisition. When specimen is collected from sampling sites, it is transfered to the lab. After analysis, the result is transmitted to the personal computer via serial communication between machine and multi-port card using interrupt method. Then, the patient's information (Name, Sex, etc.) is obtained from the HOST computer througth the emulator. The combined data(patient information & lab data) is transmitted to the each request site via LAN automatically. From the collected data, patient's previous data could be reviewed, and it could be used for the various statistics and the flow chart for clinical research. Also, we found that this system reduces the personal labor.

• Journal of Society of Preventive Korean Medicine
• /
• v.17 no.1
• /
• pp.1-11
• /
• 2013

Objectives : The aim of this research is to produce information by gathering up the data on the interaction between medicinal herbs which lie scattered in oriental medical books, and to provide people with easy access to the information by visualizing it. Methods : For this purpose, this study established the fundamental data by organizing the patterns of interaction into some kinds after selecting a part of Bonchogangmok(本草綱目) and extracting its text. In addition, in an effort to visualize the data, the study converted the data into 'net' file and visualized the interaction between medicinal herbs on Pajek. The visualization was done targeting a total of three patterns, such as 1 medicinal herb, 2 medicinal herbs, and 1 prescription. With the data on 'Chinese Lacquer(乾漆)' for 1 medicinal herb, data on 'Licorice(甘草)' and 'Chinese Lacquer(乾漆)' for 2 medicinal herbs, and data on 'Iijin-tang(二陳湯)' for prescription, the research conducted the analysis of the network using 'Kamada-Kawaii Algorithm' on Pajek. Results : As a result of the analysis, it was possible to see the meanings at a single glance as the scattered and fractional meanings were integrated with focus on medicinal herbs, but the increasing number of analyzed medicinal herbs tended to more and more complicate their relationships, thus, requiring additional work like filtering. Conclusions : Such results are fairly applicable in on-line database, and it is judged that if further research expands its scope to include systematic classification of medicinal herbs or cover other medical books than Bonchogangmok, it will create more objective, abundant information.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.2 s.46
• /
• pp.1-8
• /
• 2007

Although the Java bytecode has numerous advantages, there are also shortcomings such as slow execution speed and difficulty in analysis. Therefore, in order for the Java class file to be effectively executed under the execution environment such as the network, it is necessary to convert it into optimized code. We implements CTOC. In order to statically determine the value and type, CTOC uses the SSA Form which separates the variable according to assignment. Also, it uses a Tree Form for statements. But, due to insertion of the $\phi$-function in the process of conversion into the SSA Form, the number of nodes increased. This paper shows the dead code elimination to obtain a more optimized code in SSA Form. We add new live field in each node and achieve dead code elimination in tree structures. We can confirm after dead code elimination though test results that nodes decreases.

• Restorative Dentistry and Endodontics
• /
• v.28 no.1
• /
• pp.50-56
• /
• 2003

The purpose of this study was to evaluate the effects of EDTA and pulsed Nd :YAG laser on apical leak-age of canal obturation. Forty-eight single-rooted teeth were used in this study. The teeth were instrumented up to a size 40 K-file and irrigated with 2.5% NaOCl between each fie size. And the teeth were divided into 4 groups. In group A, the root canals were irrigated with a final flush of 5ml 2.5% NaOCl as a control group. The teeth in group B were irrigated with a final flush of 5ml 17% EDTA. The teeth in group C and D were irradiated by pulsed Nd：YAG laser(laser parameters were set at 1W, 100mJ, 10Hz, and 2W, 100mJ, 20Hz respectively). The results were as follows : 1. Apical leakage was observed in 50% of samples in group A, 30% of samples in group B, 20% of samples in group C, and 10% of samples in group D. 2. The teeth in group B had less leakage than group A, but there was no statistically significant differences(p＞0.05). 3. The teeth in group C, D had less leakage than group A, and there was statistically significant differences(p＜0.05). 4. The teeth in group C, D had less leakage than group B, but there was no statistically significant differences(p＞0.05). 5. There was no significant differences in apical leakage between group C and group D(p＞0.05).

• Restorative Dentistry and Endodontics
• /
• v.41 no.1
• /
• pp.6-11
• /
• 2016

Objectives: The purpose of this in vitro study was to evaluate the accuracy of working length (WL) determination of four electronic apex locators (EALs), namely, Root ZX (RZX), Elements diagnostic unit and apex locator (ELE), SybronEndo Mini Apex locator (MINI) and Propex pixi (PIXI) using Stainless steel (SS) and nickel-titanium (NiTi) hand files. The null hypothesis was that there was no difference between canal length determination by SS and NiTi files of 4 EALs. Materials and Methods: Sixty extracted, single rooted human teeth were decoronated and the canal orifice flared. The actual length (AL) was assessed visually, and the teeth were embedded in an alginate model. The electronic length (EL) measurements were recorded with all four EALs using SS and NiTi files at '0.5' reading on display. The differences between the AL and EL were compared. Results: The results obtained with each EAL with SS and NiTi files were compared with AL. A paired sample t test showed that there was a statistical significant difference between EAL readings with SS and NiTi files for RZX and MINI (p < 0.05). The accuracy of RZX, ELE, MINI and PIXI within ${\pm}0.5 mm$ of AL with SS/NiTi files were 93.3%/70%, 90%/91.7%, 95%/68.3%, and 83.3%/83.3%, respectively. Conclusions: The results of this study indicate that Root ZX was statistically more accurate with NiTi files compared to SS files, while MINI was statistically more accurate with SS files compared to NiTi files. ELE and PIXI were not affected by the alloy type of the file used to determine WL.

• The Journal of the Korean dental association
• /
• v.55 no.1
• /
• pp.63-70
• /
• 2017

Materials and methods: Sixty extracted premolars were assigned to three groups according to the root canal system (Weine's classification; type I, II and III) of 20 teeth each using radiographic examination. The root tip was cut horizontally 1 mm from the anatomical apex and the apical cross-section was visualized using microscope at x50 magnification and photographed. Minimum and maximum apical root canal diameter of each tooth was measured and classified into three types by canal morphology (round, oval and flattened shape). Statistical analysis was performed to compare the apical root canal diameter and morphology according to the root canal system. Results: In apical root canal morphology at cross-sectional view, the most common shape was round in type I, flat in type II, and oval in type III. In apical root canal diameters at cross-sectional view, there was a significant difference between the minimum and maximum diameter in all types (p<0.05). The maximum diameter was 0.331 mm in type I, 0.519 mm in type II, and 0.310 mm in type III. There was a significant difference among type I, III and type II (p<0.05). Conclusion: The morphology and diameter of apical root canal was different according to the root canal system. Therefore, clinicians should consider the apical file size in view of the apical root canal shape according to the root canal system.

• KIISE Transactions on Computing Practices
• /
• v.22 no.1
• /
• pp.20-25
• /
• 2016

With the advent of the era of digital big data, the Hadoop platform has become widely used in various fields. However, the Hadoop MapReduce framework suffers from problems related to the increase of the name node's main memory and map tasks for the processing of large number of small files. In addition, a method for running C++-based tasks in the MapReduce framework is required in order to conjugate GPUs supporting hardware-based data parallelism in the MapReduce framework. Therefore, in this paper, we present a face detection system that generates a sequence file for images to process big data for images in the Hadoop platform. The system also deals with tasks for GPU-based face detection in the MapReduce framework using Hadoop Pipes. We demonstrate a performance increase of around 6.8-fold as compared to a single CPU process.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.374-380
• /
• 2015

With explosion of wireless traffic it is required to further investigate the technologies on acquiring available spectrum resources and on sharing frequency with existing users. In 3GPP, it is started to study on feasibility and functional requirement of LTE standard in order to extend cellular services offered on only licensed band to 5 GHz unlicensed band. Operating scenario on LTE in unlicensed band is focused on carrier aggregation with licensed band, and the coexistence with Wi-Fi services in 5 GHz band is concerned as a major requirement. For a single global solution framework for licensed assisted access to unlicensed spectrum, listen-before-talk(LBT) mechanism of European regulation for fair access to channel under the coexistence environments is currently examined in 3GPP. In this paper, we evaluate two types of LBT, frame based equipment and load based equipment, with considering LTE carrier aggregation feature and performances of file transferred time and throughput.