• 제목/요약/키워드: Single feed-back

검색결과 52건 처리시간 0.022초

단상제어형 3상 PWM 승압용 컨버터의 시뮬레이션 (Simulation of three Phase PWM Boost converter)

  • 강욱중;김상돈;전중함;이광수;서기영;이현우
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1999년도 하계학술대회 논문집 F
    • /
    • pp.2668-2670
    • /
    • 1999
  • In the past, the PWM converter had a large switching loss by hard switching and difficult to high frequency operation. The resonance converter to decrease the switching loss and EMI is required the frequency control and needed to reduce the voltage or current stress at each parts. So, this paper propose the 3-phase boost converter and the method to compensated input power factor by control the amplitude - an instantaneous value of the DC inductor current -and control the switching frequency that a modulation error by the ripple of the DC inductor current. The proposed 3-phase PWM boost converter of single phase control type can takes higher capacity and compensate the power factor by using Feed back controller at each phase for the existing 3-phase bridge rectifier type. Moreover the 3-phase full bridge type using the rectifier at each 3-phase circuit will be small size reactor and compensate input power factor by minimize harmonic components of each phase.

  • PDF

퍼지와 역전파신경망 기법을 사용한 터보프롭 엔진의 진단에 관한 연구 (Study on Fault Diagnostics of a Turboprop Engine Using Fuzzy Logic and BBNN)

  • 공창덕;임세명;김건우
    • 한국추진공학회지
    • /
    • 제15권2호
    • /
    • pp.1-7
    • /
    • 2011
  • 다양한 비행환경에서 장시간 체공하며 운용되는 UAV에서 추진시스템을 신뢰성 있게 운용하는 것은 매우 중요하다. 이런 UAV에 사용되는 터보프롭 엔진의 정확한 손상진단은 신뢰성과 이용률을 향상시킬 수 있다. 본 연구에서는 엔진 측정 파라미터들의 변화로부터 퍼지 이론을 적용하여 손상된 구성품을 식별한 후 훈련된 신경망 알고리즘을 식별된 손상 패턴에 적용하여 손상된 양을 정확히 진단할 수있는 방법을 제안하였다. 이렇게 제안된 진단 방법은 단일손상과 다중손상 모두 진단할 수 있다.

Hydrogen Production Using Membrane Reactors

  • Giuseppe Barbieri;Paola Bernardo;Enrico Drioli;Lee, Dong-Wook;Sea, Bong-Kuk;Lee, Kew-Ho
    • Korean Membrane Journal
    • /
    • 제5권1호
    • /
    • pp.68-74
    • /
    • 2003
  • Methane steam reforming (MSR) reaction for hydrogen production was studied in a membrane reactor (MR) using two tubular membranes, one Pd-based and one of porous alumina. A higher methane conversion than the thermodynamic equilibrium for a traditional reactor (TR) was achieved using MRs. The experimental temperature range was 350-500$^{\circ}C$; no sweep-gas was employed during reaction tests to avoid its back-permeation through the membrane and the steam/methane molar feed ratio (m) varied in the range 3.5-5.9. The best results (the difference between the MR conversion and the thermodynamic equilibrium was of about 7%) were achieved with the alumina membrane, working with the highest steam/methane ratio and at 450$^{\circ}C$. Silica membranes prepared at KRICT laboratories were characterized with permeation tests on single gases (N$_2$, H$_2$ and CH$_4$). These membranes are suited for H$_2$ separation at high temperature.

퍼지와 역전파신경망 기법을 사용한 터보프롭 엔진의 진단에 관한 연구 (Study on Fault Diagnostics of a Turboprop Engine Using Fuzzy Logic and BBNN)

  • 공창덕;임세명;김건우
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2010년도 제35회 추계학술대회논문집
    • /
    • pp.499-505
    • /
    • 2010
  • 다양한 비행환경에서 장시간 체공하며 운용되는 UAV에서 추진시스템을 신뢰성 있게 운용하는 것은 매우 중요하다. 이런 UAV에 사용되는 터보프롭 엔진의 정확한 손상진단은 신뢰성과 이용률을 향상시킬 수 있다. 본 연구에서는 엔진 측정 파라미터들의 변화로부터 퍼지 이론을 적용하여 손상된 구성품을 식별한 후 훈련된 신경망 알고리즘을 식별된 손상 패턴에 적용하여 손상된 양을 정확히 진단할 수 있는 방법을 제안하였다. 이렇게 제안된 진단 방법은 단일손상과 다중손상 모두 진단할 수 있다.

  • PDF

Design of tensegrity structures using artificial neural networks

  • Panigrahi, Ramakanta;Gupta, Ashok;Bhalla, Suresh
    • Structural Engineering and Mechanics
    • /
    • 제29권2호
    • /
    • pp.223-235
    • /
    • 2008
  • This paper focuses on the application of artificial neural networks (ANN) for optimal design of tensegrity grid as light-weight roof structures. A tensegrity grid, 2 m ${\times}$ 2 m in size, is fabricated by integrating four single tensegrity modules based on half-cuboctahedron configuration, using galvanised iron (GI) pipes as struts and high tensile stranded cables as tensile elements. The structure is subjected to destructive load test during which continuous monitoring of the prestress levels, key deflections and strains in the struts and the cables is carried out. The monitored structure is analyzed using finite element method (FEM) and the numerical model verified and updated with the experimental observations. The paper then explores the possibility of applying ANN based on multilayered feed forward back propagation algorithm for designing the tensegrity grid structure. The network is trained using the data generated from a finite element model of the structure validated through the physical test. After training, the network output is compared with the target and reasonable agreement is found between the two. The results demonstrate the feasibility of applying the ANNs for design of the tensegrity structures.

퍼지 및 신경망을 이용한 무인 항공기용 터보축 엔진의 다중손상진단에 관한 연구 (A Study on Multi-Fault Diagnosis for Turboshaft Engine of UAV Using Fuzzy and Neural Networks)

  • 공창덕;기자영;고성희;구영주;이창호
    • 한국항공우주학회지
    • /
    • 제37권6호
    • /
    • pp.556-561
    • /
    • 2009
  • 다양한 비행환경에서 장시간 체공하며 원격 조종되는 무인항공기에서 추진시스템을 신뢰성 있게 운영하는 것은 매우 중요하다. 스마트 무인기의 수직 이착륙 및 전진 비행에 사용 되는 터보축엔진의 정확한 손상진단은 신뢰성과 이용률을 향상시킬 수 있을 것이다. 본 연구에서는 엔진 측정 파라미터들의 변화로부터 퍼지이론을 적용하여 손상된 구성품을 식별한 후 훈련된 신경망 알고리즘을 식별된 손상 패턴에 적용 손상된 양을 정확히 진단할 수 있는 방법을 새로이 제안하였다. 제안된 진단방법은 단일손상은 물론 다중손상도 진단할 수 있다.

Dragon스트림 암호 알고리즘의 하드웨어 구현 (A FPGA Implementation of Stream Cipher Algorithm Dragon)

  • 김헌욱;황기현;이훈재
    • 한국정보통신학회논문지
    • /
    • 제11권9호
    • /
    • pp.1702-1708
    • /
    • 2007
  • Dragon 스트림 암호 알고리즘은 현재 ECRYPT 프로젝트의 일부인 eSTREAM에 참여하여 소프트웨어 분야(Profile 1)의 Phase 1, 2단계를 통과하여 Phase 3단계에 등록된 상태이다. Dragon은 기존의 스트림 암호와 달리 한 개의 워드(32비트)단위의 NLFSR(non-linear feedback shift register)을 사용하고, 128/256 비트의 key와 IV(Initialization Vector)를 입력받아 64비트의 키 수열을 생성하는 키 수열 발생기(Keystream Generator)이다. 본 논문에서는 Dragon 스트림 암호 알고리즘을 Altera사의 Quartus II툴을 이용하여 Cyclone III FPGA 소자(EP2C35F672I8)에 구현 및 타이밍 시뮬레이션을 하였고, 그 결과 111MHz에서 7.1Gbps의 처리량을 보였다.

국내 남성 패션 유튜버 및 패션 콘텐츠 특성 연구 (Characteristics of Fashion Contents of Domestic Male Fashion YouTubers)

  • 홍윤정
    • 패션비즈니스
    • /
    • 제26권1호
    • /
    • pp.119-139
    • /
    • 2022
  • This study analyzed characteristics of domestic male fashion YouTubers and fashion contents in accordance with the need to analyze various content demands and testes of male consumers in the fashion industry. Using literature research and fashion expert evaluation, characteristic factors of fashion YouTubers were derived and the popular content of fashion YouTubers was classified by subject to analyze contents according to characteristics of YouTubers. Based on literature research, ten representative male fashion YouTubers were evaluated by fashion experts. Characteristics of male fashion contents in Korea were derived from attractiveness-friendliness, friendliness, professionalism-friendliness, and expertise. Contents of male fashion YouTubers were mainly composed of styling contents that could feed back daily looks, fashion-related information contents, and Vlogs. They mainly dealt with daily fashion coordination evaluation made by YouTubers. Based on the proportion of fashion information easily accessed by ordinary men through single fashion item's recommendations, shopping know-how or styling tip was mainly dealt with. This study was significant in that it analyzed characteristics and contents of male fashion YouTubers according to the need to analyze various content demands and tastes of male consumers who have recently emerged as an important consumer group in the fashion industry.

Floating zone법에 의한 Nb를 첨가한 strontium titanate 단결정 성장 (Nb doped strontium titanate single crystal growth by floating zone method)

  • 전병식;조현;오근호
    • 한국결정성장학회지
    • /
    • 제5권3호
    • /
    • pp.215-222
    • /
    • 1995
  • Floating zone법으로 $SrTiO_3$$Nb_2O_5$를 02wt% 첨가한 단결정을 육성하였다. 결정성장시 성장분위기로는 air와 질소분위기에서 각각 결정을 육성하였으며, 원료봉의 소결온도 따른 성장계면양상을 조사하였다. 성장조건으로는 성장속도는 5mm/hr, 상부축과 하부축의 회전속도는 30rpm이었고, air분위기시 air의 유량은 1.5 ${\ell}/min$, 질소분위기시 질소가스의 유량은 0.5 ${\ell}/min$이었다. 육성한 결정을 XRD, Laue, chemical etching 등의 분석을 하였으며, 질소분위기에서 annealing 한 후 비저항을 측정하였으며 이를 통해 activation energy를 조사하였다.

  • PDF

MIMO-OFDM 기반 SDR 시스템을 위한 효율적인 FFT 프로세서 설계 (Design of Efficient FFT Processor for MIMO-OFDM Based SDR Systems)

  • 양기정;정윤호
    • 대한전자공학회논문지SD
    • /
    • 제46권12호
    • /
    • pp.87-95
    • /
    • 2009
  • 본 논문에서는 MIMO-OFDM 기반의 SDR 시스템을 위한 효율적인 FFT 구조를 제안한다. 제안한 scalable FFT/IFFT 프로세서는 64/128/512/1024/2048-point FFT 연산을 가변적으로 수행할 수 있다. 또한 mixed radix (MR) 기법과 multi-path delay commutator (MDC) 구조를 사용하여 비단순 승산을 줄임으로써 기존의 설계 구조에 비해 시스템 수율 변화 없이 하드웨어 복잡도를 크게 감소시켰다. 제안된 scalable FFT/IFFT 프로세서는 하드웨어 설계 언어 (HDL)를 이용하여 설계 되었고, 0.18um CMOS 스탠다드 셀 라이브러리를 이용하여 논리 합성되었다. 논리합성 결과 4채널 radix-2 single-path delay feed back (R2SDF) FFT 프로세서와 비교시 59% 감소된 게이트 수와 39% 감소된 메모리로 구현 가능함을 확인하였고, 4채널 radix-2 MDC (R2MDC) FFT 프로세서와 비교시 16.4% 감소된 게이트 수와 26.8% 감소된 메모리로 구현 가능함을 확인하였다.