• 대한전기학회논문지:전력기술부문A
• /
• 제48권4호
• /
• pp.410-418
• /
• 1999

This paper describes the use of residual and parameter identification methods for fault detection in an air handling unit. Faults can be detected by comparing expected condition with the measured faulty data using residuals. Faults can also be detected by examining unmeasurable parameter changes in a model of a controlled system using a system identification technique. In this study, AutoRegressive Moving Average with seXtrnal input(ARMAX) and AutoRegressive with eXternal input(ARX) models with both single-input/single-input and multi-input/single-input structures are examined. Model parameters are determined using the Kalman filter recursive identification method. Regression equations are calculated from normal experimental data and are used to compute expected operating variables. These approaches are tested using experimental data from a laboratory's variable-air-volume air-handling-unit.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1886-1898
• /
• 2015

In today’s era of advanced technological developments, the threats to the authenticity and integrity of digital images, in a nutshell, the threats to the Image Forensics Research communities have also increased proportionately. This happened as even for the ‘non-expert’ forgers, the availability of image processing tools has become a cakewalk. This image forgery poses a great problem for judicial authorities in any context of trade and commerce. Block matching based image cloning detection system is widely researched over the last 2-3 decades but this was discouraged by higher computational complexity and more time requirement at the algorithm level. Thus, for reducing time need, various dimension reduction techniques have been employed. Since a single technique cannot cope up with all the transformations like addition of noise, blurring, intensity variation, etc. we employ multiple techniques to a single image. In this paper, we have used Fuzzy logic approach for decision making and getting a global response of all the techniques, since their individual outputs depend on various parameters. Experimental results have given enthusiastic elicitations as regards various transformations to the digital image. Hence this paper proposes Fuzzy based cloning detection and classification system. Experimental results have shown that our detection system achieves classification accuracy of 94.12%. Detection accuracy (DAR) while in case of 81×81 sized copied portion the maximum accuracy achieved is 99.17% as regards subjection to transformations like Blurring, Intensity Variation and Gaussian Noise Addition.

• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.107-116
• /
• 2014

This paper presents camera-based road surface marking detection methods suited to sensor fusion-based positioning system that consists of low-cost GPS (Global Positioning System), INS (Inertial Navigation System), EDM (Extended Digital Map), and vision system. The proposed vision system consists of two parts: lane marking detection and RSM (Road Surface Marking) detection. The lane marking detection provides ROIs (Region of Interest) that are highly likely to contain RSM. The RSM detection generates candidates in the regions and classifies their types. The proposed system focuses on detecting RSM without false detections and performing real time operation. In order to ensure real time operation, the gating varies for lane marking detection and changes detection methods according to the FSM (Finite State Machine) about the driving situation. Also, a single template matching is used to extract features for both lane marking detection and RSM detection, and it is efficiently implemented by horizontal integral image. Further, multiple step verification is performed to minimize false detections.

• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.65-71
• /
• 2008

In this paper, we propose a new driving mode control algorithm for a mobile robot based on obstacle detection. The robot has a variable geometry single-tracked mechanism, so it can maximize a contact length with ground for the adaptability to off-road and puesue a stable system due to the lower center of gravity. However this robot system embodied passive type according to operator. In this reason, several problems are detected. So, this research presents a new method of obstacle detection using PSD infrared sensors and translates the variable tracks on the best suited driving mode actively. And experimental results about mentioned are presented.

• Journal of electromagnetic engineering and science
• /
• 제11권2호
• /
• pp.113-121
• /
• 2011

Multiple-input multiple-output with orthogonal frequency division multiplexing technology (MIMO-OFDM) is considered to be the ultimate solution for increasing system throughput and for enhancing communication reliability. In this paper, we propose to increase the uplink (UL) throughput by assigning the same UL resources to multiple single-antenna mobile stations. This leads to the loss of orthogonality among sub-carriers. Thus, at the base station (BS), MIMO-OFDM detection techniques are used to separate the streams of different users assigned the same UL resources. To obtain a realistic performance evaluation, different channel scenarios are applied with different correlation values among the antennas of the users. Simulation results show that the proposed MIMO-OFDM system linearly increases the uplink capacity of the OFDM system while maintaining a mobile station transmitter as simple as that used in a conventional OFDM system. For instance, when 4 users are assigned the same UL resources, the throughput of the proposed system is 3.07 times that achieved by a conventional single input single output OFDM system.

• Journal of Multimedia Information System
• /
• 제6권4호
• /
• pp.329-332
• /
• 2019

Recently, smart lighting systems are the combination between sensors and lights. These systems turn on/off and adjust the brightness of lights based on the motion of object and the brightness of environment. These systems are often applied in places such as buildings, rooms, garages and parking lot. However, these lighting systems are controlled by lighting sensors, motion sensors based on illumination environment and motion detection. In this paper, we propose an automatic lighting control system using one single camera for buildings, rooms and garages. The proposed system is one integration the results of digital image processing as motion detection, hand gesture detection to control and dim the lighting system. The experimental results showed that the proposed system work very well and could consider to apply for automatic lighting spaces.

• 한국통신학회논문지
• /
• 제25권9A호
• /
• pp.1273-1281
• /
• 2000

In this paper we studied for multi-user detection system, which hold the merit of CDMA system and can enhance the system capacity. We designed actually realizable quasi-optimal multiuser detection system by use of linear equalizer on the concept that multiuser detection algorithm can be reduced by combining TDMA with CDMA. we call this the hybrid TDMA/CDMA system. And we proposed multiuser detection system, which can use PSAD and MSDD channel estimation method. As a result of performance analysis we acquired equal or much better performance by use of linear multichannel equalizer in the case of not so many user. And on the occasion of many user within cell we can also acquired much better performance in comparison with conventional single user detection system by use of hybrid TDMA/CDMA system.

• The Plant Pathology Journal
• /
• 제22권2호
• /
• pp.164-167
• /
• 2006

An immunocapture reverse transcription-polymerase chain reaction (IC/RT-PCR) was developed for simultaneous detection of two pepper-infecting RNA viruses, Pepper mud mottle virus (PMMoV) and Tobacco mild green mosaic virus (TMGMV). The assay could be performed in a single tube for simultaneous and sensitive detection of these tobamoviruses. This detection system revealed thousand-fold increase in detection sensitivity compare to ELISA. This method could save time and reagent cost compare to common RT-PCR which needs several reactions and several procedures of viral RNA extractions for the same number of samples.

• 한국컴퓨터정보학회논문지
• /
• 제27권1호
• /
• pp.1-8
• /
• 2022

본 논문에서는 실시간 객체 탐지(Real-time Object Detection)가 가능한 YOLOv4 모델과 DeepSORT 알고리즘을 활용한 객체 추적(Object Tracking) 기술을 활용하여 CCTV 영상 이미지 기반의 화재 탐지 시스템을 제안한다. 화재 탐지 모델은 10800장의 학습용 데이터로부터 학습되었으며 1000장의 별도 테스트 셋을 통해 검증되었다. 이후 DeepSORT 알고리즘을 통해 탐지된 화재 영역을 추적하여 단일 이미지 내의 화재 탐지율과 영상 내에서의 화재 탐지 유지성능을 증가시켰다. 영상 내의 한 프레임 혹은 단일 이미지에 대한 화재 탐지 속도는 장당 0.1초 이내로 실시간 탐지가 가능함을 확인하였으며 본 논문의 AI 화재 탐지 시스템은 기존의 화재 사고 탐지 시스템 보다 안정적이고 빠른 성능을 지니고 있어 화재현장에 적용 시 화재를 조기 발견하여 빠른 대처 및 발화단계에서의 진화가 가능할 것으로 예상된다.

• 반도체디스플레이기술학회지
• /
• 제23권1호
• /
• pp.19-24
• /
• 2024

It is not an exaggeration to say that a single fire causes a lot of damage, so fires are one of the disaster situations that must be alerted as soon as possible. Various technologies have been utilized so far because preventing and detecting fires can never be completely accomplished with individual human efforts. Recently, deep learning technology has been developed, and fire detection systems using object detection neural networks are being actively studied. In this paper, we propose a new fire detection system that improves the previously studied fire detection system. We train the YOLOv8 model using refined datasets through improved labeling methods, derive results, and demonstrate the superiority of the proposed system by comparing it with the results of previous studies.