• Progress in Superconductivity and Cryogenics
• /
• v.17 no.4
• /
• pp.30-33
• /
• 2015

We report the synthesis of Ni-doped $BaFe_2Se_3$ single crystals by using a flux method. X-ray diffraction (XRD) of $Ba(Fe_{1-x}Ni_x)_2Se_3$ shows a gradual peak shift with an increase in the nominal Ni-doping rate, x = 0, 0.05, and 0.10, due to a decrease in unit-cell volume. All samples show a spin glass transition, and temperature dependence of magnetic susceptibility shows a negligible change in the spin-glass transition temperature ($T_g$) with Ni concentration x. The temperature dependence of electrical resistivity for $BaFe_2Se_3$ shows an insulating behavior, and the resistivity value at 295 K and the activation energy ($E_a$) obtained from the Arrhenius plot decrease with increasing x. These results suggest that the Ni doping can be effectively worked as a dopant for electron charge carriers, but is less efficient in controlling the magnetic property, such as spin glass transition, in the $BaFe_2Se_3$ compound.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.04b
• /
• pp.157-160
• /
• 2004

Ferroelectric $(Ba_xSr_{1-x})TiO_3$ (BST) thin films have been deposited on (001) MgO single crystals by a pulsed laser deposition (PLD) method. The structure of deposited BST thin films were investigated by an x-ray diffractometer. Calculated c-axis lattice parameters of the BST films exhibit a strong lattice distortion, which was not observed in ceramic BST at room temperature. This lattice distortion of BST has been attributed to strains caused by lattice constant difference between film and substrate, oxygen vacancies in BST film, and thermal expansion difference between film and substrate. Ferroelectric properties at 10 GHz have been measured using a HP 8510C vector network analyzer. Dielectric properties, capacitance tunability and quality factor, of the interdigitaed capacitors fabricated on BST films were calculated from the measured s-parameters. Two distinct behaviors in structural, opitical, and microwave properties of BST films were observed; below and above 200 mTorr of oxygen pressure in the deposition chmber.

• Korean Journal of Materials Research
• /
• v.23 no.6
• /
• pp.329-333
• /
• 2013

The structural phase transformations of $0.7Pb(Mg_{1/3}Nb_{2/3})O_3-0.3PbTiO_3$ (PMN-0.3PT) were studied using high resolution x-ray diffraction (HRXRD) as a function of temperature and electric field. A phase transformational sequence of cubic (C)${\rightarrow}$tetragonal (T)${\rightarrow}$rhombohedral (R) phase was observed in zero-field-cooled conditions; and a $C{\rightarrow}T{\rightarrow}$monoclinic $(M_C){\rightarrow}$ monoclinic ($M_A$) phase was observed in the field-cooled conditions. The transformation of T to $M_A$ phase was realized through an intermediate $M_C$ phase. The results also represent conclusive and direct evidence of a $M_C$ to $M_A$ phase transformation in field-cooled conditions. Beginning from the zero-field-cooled condition, a $R{\rightarrow}M_A{\rightarrow}M_C{\rightarrow}T$ phase transformational sequence was found with an increasing electric field at a fixed temperature. Upon removal of the field, the $M_A$ phase was stable at room temperature. With increasing the field, the transformation temperature from T to $M_C$ and from $M_C$ to $M_A$ phase decreased, and the phase stability ranges of both T and $M_C$ phases increased. Upon removal of the field, the phase transformation from R to $M_A$ phase was irreversible, but from $M_A$ to $M_C$ was reversible, which means that $M_A$ is the dominant phase under the electric field. In the M phase region, the results confirmed that lattice parameters and tilt angles were weakly temperature dependent over the range of investigated temperatures.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.7
• /
• pp.653-658
• /
• 2016

High pressure components of a gas turbine engine are generally made of nickel-base superalloys, using precision casting process due to complicated geometries with intricate channels and cooling holes. Turbine components manufactured from directionally solidified and single crystal materials have columnar grains; however, it is found that the crystals do not grow in its preferred direction, although the orientation can be controlled. This anisotropy can lead to the variations of elastic and Hill's parameters in constitutive equations, and they alter stress distributions and the low cycle fatigue life. We aims to evaluate the effects of perturbed crystal orientations on the structural integrity of a directionally solidified nozzle using low cycle fatigue life. We also attempt to show the necessity for the control of allowed manufacturing errors and stochastic analysis. Our approaches included conjugate heat transfer and structural analysis, along with low cycle fatigue life assessment.

• Progress in Superconductivity
• /
• v.7 no.2
• /
• pp.130-134
• /
• 2006

Buffer layers such as $CeO_2\;and\;Yb_2O_3$ films for YBCO coated conductors were deposited on (100) $SrTiO_3$ single crystals and (100) textured Ni substrates by a metal organic chemical vapor deposition (MOCVD) system of the hot-wall type. The substrates were moved with the velocity of 40 cm/hr. Source flow rate, $Ar/O_2$ flow rate and deposition temperature were main processing variables. The degree of film epitaxy and surface morphology were investigated using XRD and SEM, respectively. On a STO substrate, the $CeO_2$ film was well grown epitaxially above the deposition temperature of $450^{\circ}C$. However, on a Ni substrate, the XRD showed NiO (111) and (200) peaks due to Ni oxidation as well as (111) and (200) film growth. For the films deposited with $O_2$ gas as oxygen source, it was found that the NiO film was formed at the interface between the buffer layer and the Ni substrate. The NiO layer interrupts the epitaxial growth of the buffer layer. It seems that the epitaxial growth of the buffer layer on Ni metal substrates using $O_2$ gas is difficult. We are considering a new method avoiding Ni oxidation with $H_2O$ vapor instead of $O_2$ gas.

• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.351-360
• /
• 2003

This study was carried out to settle the plugging problem which occurs frequently when agricultural wettable powder is used in pest control work using the crushing and the dispersing effects caused by irradiation of ultrasonic wave. Sonication was applied to the wettable powder suspension in a beaker for 30 seconds using a 28 kHz, 200 W PZT BLT, and the image of suspension before and after sonication was observed using a microscope and a SEM. The image of tow commercial wettable powder suspensions in water observed using an optics microscope showed that the agglomerated particles were irregularly distributed over the whole observed region when stirred mechanically, while showing more uniform distribution composed of comparatively single particles in the whole observed region after sonication. Concerning the above, the projected areas of particles in the four suspensions after sonication were decreased distinctively in the observed range of the microscope and the atomization of crystals was much developed. Over the measured range of 5.6∼4,157 ${\mu}$m particle size, the overall projected area of particles was decreased to 58.3∼89.6% on the average after sonication. When the SEM images of sonicated wettable powder suspensions dissolved in water and CH$_3$OH were compared to the suspensions before sonication, such phenomena as the atomization of particles, the expansion of voids between particles, the reduction and the decrease of agglomerated particle groups, and the progress of crack developments on the surface of flake-shaped particles were observed. It seemed possible that the plugging problem that occurs frequently in pest control machine when using wettable powder would be settled by the use of sonication.

• Analytical Science and Technology
• /
• v.6 no.2
• /
• pp.149-156
• /
• 1993

The formation of the graphite spherulites has been studied experimentally in the Ni-C liquid under high pressure and temperature. In the diamond-stable region the graphite spherulites were formed and grew stably. They were not the polycrystalline particles but the single crystals of the fullerene-type, respectively, grown spirally with much imperfection. And they were proved to be in a mixture state of carbon atoms with $sp^2$- and $sp^3$-bonding by an Auger electron spectroscope and a high resolution transmission electron microscope. As the pressure decreased from the diamond-stable region to the graphite-stable region, the shape of the graphite particles changed gradually from the sphere to the flaky shape. The formation of the graphite spherulites was attributed to the stable existence of the carbon atoms with $sp^3$ bonding in the diamond-stable region. The formation of the large fullerene-type graphite spherulites with much imperfection is well agreed with Kroto's prediction for growth of the giant fullerene.

• Electrical & Electronic Materials
• /
• v.5 no.3
• /
• pp.284-294
• /
• 1992

합성용질확산법으로 GaP단결정을 성장시키고 몇가지 성질을 조사하였다. 정지상태에서 결정의 성장속도는 1.75[mm/day]이었고 결정성장용 석영관을 전기로내에서 하강시키므로써 양질의 GaP 단결정을 성장하였다. 에치피트밀도는 결정의 성장축 방향으로 3.8*$10^{4}$[$cm^{-2}$]부터 2.3*$10^{5}$[$cm^{-2}$] 까지 증가하였다. 성장된 GaP결정의 이동도와 캐리어농도는 실온에서 197.49[$cm^{2}$/V.sec]와 6.75*$10^{15}$[$cm^{-3}$]이었고 77K의 온도에서는 266.91[$cm^{2}$ /V.sec]와 3.13*$10^{14}$[$cm^{-3}$]이었다. 에너지갭의 온도의존성은 실험적으로 $E_{g}$(T)=2.3383-(6.082*$10^{-4}$) $T^{2}$/(373.096+T)[eV]로 구하여졌다. 저온에서 측정된 광루미네센스 스펙트럼은 구속된 여기자의 복사재결합과 재결합 과정에 포논의 참여로 인하여 에너지갭 부근의 복잡한 선 스펙트럼이 나타났고 얕은 준위의 Si도너와 Zn억셉터준위 사이에서의 복사재결합 및 이에 대한 1LO, 2LO의 포논복제가 나타났으며 S $i_{Ga}$ -S $i_{p}$의 쌍방출에 의하여 1.8932[eV]에서 넓은 반치전폭의 피크가 나타났다. GaP의 적외선 흡수는 TO, LO, LA, T $A_{1}$, T $A_{2}$ 포논들의 이중결합모드와 G $a_{2}$O의 진동모드 및 Si도너와 Zn억셉터들에 의하여 일어났다. Zn를 확산시키어 제작한 p-n GaP발광다이오드는 실온에서의 발광중심피크가 6250[.angs.]이었고 최대광출력은 0.0916[mW], 양자효율은 0.51%이었다.이었다.

• The Journal of the Acoustical Society of Korea
• /
• v.24 no.3
• /
• pp.160-165
• /
• 2005

We have developed SH (shear horizontal) surface acoustic wave (SAW) sensors for detection of the immobilization and hybridization of DNA (deoxyribonucleic acid) on the gold coated delay line of transverse SAW devices. The experiments of DNA immobilization and hybridization were performed with 15-mer oligonucleotides (probe and complementary target DNA). The sensor consists of twin SAW delay line oscillators operating at 100 MHz fabricated on $36^{\circ}$ rotated Y-cut $LiTaO_3$ piezoelectric single crystals. The relative change in the frequency of the two oscillators was monitored to detect the hybridization between target DNA and immobilized probe DNA in pH 7.4 PBS (phosphate buffered saline) solution. The measurement results showed a good response of the sensor to the mass loading effects of the DNA immobilization and hybridization with the sensitivity up to $1.55{\cal}ng/{\cal}ml/Hz$.

• Korean Journal of Materials Research
• /
• v.30 no.9
• /
• pp.453-457
• /
• 2020

Tomb No. 1 (Donghachong) of the Buyeo Neungsan-ri Tomb complex (listed as UNESCO World Heritage Site), is a royal tomb of the Baekje Sabi Period. One wooden coffin unearthed there is an important relic of the funerary culture of the Baekje. This study examines the production techniques of gilt-bronze objects attached to the wooden coffin excavated from Donghachong. The base metal of the gilt-bronze object is pure copper, with single α phase crystals in a heterogeneous form containing annealing twins; Au and Hg are detected in the gilt layer. We suggest that the surface of the forging copperplate is gilded using a mercury amalgam technique; it is thought that the annealing twins of the base material formed during the heat treatment process for the sheet metal. The gilt layer is three to five times thicker for the gilt-bronze objects found near the foot of the coffin than those near the head. We estimate the plating process is carried out at least three times because three layers are identified on the plate near the head. Therefore, it is likely that the materials and methods used to construct the gilt-bronze objects found in different parts of the coffin are the same, but the number of platings is different. This research confirms the metal crafting techniques used in Baekje by the examination of production techniques of these gilt-bronze objects. Further, our paper presents an important example of restoration and reconstruction for a museum exhibition, through effective use of scientific analysis and investigation.