• 한국구조물진단유지관리공학회 논문집
• /
• 제6권1호
• /
• pp.213-221
• /
• 2002

This paper presents the experimental result of Reinforced Concrete column-steel beam joint connected by Band Plates(BP). Main parameters in the test are the shape of BP and thickness of plate. Ten interior and exterior RC column-steel beam joint specimens are designed. Cyclic loads are applied to the beam end of eight specimens (four interior specimens and four exterior specimens). To evaluate the cyclic effect, monotonic loads are acted for two specimens. All specimen showed similar failure pattern such as the plate of BP get torn after the large deformation. Even though the specimen with double cross type BP has lower strength than the specimen with single cross type BP, the energy dissipation capacity of the specimen turned out high. Thus, provided the strength of joint with double cross type to be designed to have suitable strength by increasing the thickness of plate, the joint system may show higher seismic capacity.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.18-33
• /
• 2008

This paper presents design optimization of a new Active Twist Rotor (ATR) blade and conducts its aeroelastic analysis in forward flight condition. In order to improve a twist actuation performance, the present ATR blade utilizes a single crystal piezoelectric fiber composite actuator and the blade cross-sectional layout is designed through an optimization procedure. The single crystal piezoelectric fiber composite actuator has excellent piezoelectric strain performance when compared with the previous piezoelectric fiber composites such as Active Fiber Composites (AFC) and Macro Fiber Composites (MFC). Further design optimization gives a cross-sectional layout that maximizes the static twist actuation while satisfying various blade design requirements. After the design optimization is completed successfully, an aeroelastic analysis of the present ATR blade in forward flight is conducted to confirm the efficiency in reducing the vibratory loads at both fixed- and rotating-systems. Numerical simulation shows that the present ATR blade utilizing single crystal piezoelectric fiber composites may reduce the vibratory loads significantly even with much lower input-voltage when compared with that used in the previous ATR blade. However, for an application of the present single crystal piezoelectric actuator to a full scaled rotor blade, several issues exist. Difficulty of manufacturing in a large size and severe brittleness in its material characteristics will need to be examined.

• 항공우주시스템공학회지
• /
• 제13권2호
• /
• pp.51-59
• /
• 2019

이번 연구에서는 앞서 Part I [1]에서 수행한 단일-셀(single-cell) 모델에 이어, 시위 방향으로 비대칭성 단면을 가지는 다중-셀(multi-cell) 복합재료 박벽보(thin-walled beam) 모델을 선정하여, 단면의 형상에 대한 이론적인 동특성을 해석하였다. 이를 위해 와핑 구속 효과와 전단 변형 효과, 보의 테이퍼비와 단면비 등을 고려하였다. Part I에서와 마찬가지로 다중-셀 단면의 질량 및 강성 계수와 고유 진동수 등의 특성을 조사하였다. 특히, 다중-셀과 단일-셀 단면을 비교하고, 다중-셀 단면의 고유 진동수에 미치는 테이퍼비와 단면비의 영향을 비교 분석하였다. 또한, 단면의 비대칭성과 와핑 함수를 보정하지 않은 경우에 대해 그 결과를 비교하였다.

• 전자공학회논문지B
• /
• 제33B권2호
• /
• pp.77-87
• /
• 1996

Existing area-based stereo matching algorithms utilize a single rectangular correlation area for computing cross-correlation between corresponding points in stereo images, and compute disparity by finding the peak in the vicinity of depth discontinuity, since, because of inconstnat disparities around discontinuities, the cross-correlation becomes low in such area. Inthis paper, a new area-based matching strategy is proposed exploiting multiple directional correlation masks instead of a single one. The proposed technique computes multiple cross-covariance functions using each oriented mask. Peaks are detected from each covariance function and the disparity is computed by choosing the location with the highest covariance value. Proposed approach can also be applied to compute disparity gradients without obtaining dense depth data. A number of examples are presented using synthetic and natural stereo images.

• Structural Engineering and Mechanics
• /
• 제53권1호
• /
• pp.17-26
• /
• 2015

The cross sections of hollow cylindrical tubes ovalise under a pure bending condition, and this reduces their flexural stiffness as their curvatures increase. It is important to accurately evaluate this phenomenon, known as the 'Brazier effect', to understand the bending behaviour of the systems considered. However, if the tubes are supported by an elastic medium or foundation, the ovalisation displacements of their cross sections may decrease. From this point of view, the purpose of this research is to analytically investigate the bending characteristics of single- and double-walled elastic tubes contacted by an elastic material by considering the Brazier effect. The Brazier moment, which is the maximum moment-carrying capacity of the ovalised cross section, can be calculated by introducing the strain energy per unit length of the tube in terms of the degree of ovalisation for the tube and the curvature. The total strain energy of the double-walled system is the sum of the strain energies of the outer and inner tubes and that of the compliant core. Results are comparatively presented to show the variation in the degree of ovalisation and the Brazier moment for single- and double-walled tubes.

• 설비공학논문집
• /
• 제21권6호
• /
• pp.347-354
• /
• 2009

Experimental study on a cross-flow air-cooled plate heat exchanger (PHE) was performed. Two types of PHEs were manufactured either with single-wave plates or with double-wave plates in parallel. Cooling air flows through the PHEs in a crosswise direction against internal hot water. The heat exchanger aims to substitute open-loop cooling towers with closed-loop water circulation, which guarantees cleanliness and compactness. In this study, prototype single-wave and double-wave PHEs were designed and tested in a laboratory scale experiments. From the tests, the double-wave PHE shows approximately 50% enhanced heat transfer performance compared to the single-wave PHE. However, the double-wave PHE costs 30% additional pressure drop. For the commercialization, a wide channel design for air flow would be essential for performance and reliability.

• 전기전자학회논문지
• /
• 제18권2호
• /
• pp.220-227
• /
• 2014

이 논문은 Dead-time을 갖는 톱니파 발생기를 이용하여 공통모드와 차동모드 피드백 루프를 구현한 Single-Inductor Dual-Output DC-DC Converter 설계에 관한 내용을 제시하고 있다. 제어회로에는 공통모드와 차동모드 피드백 루프를 Dead-time을 갖는 톱니파 발생기를 이용하여 동시에 사용하였다. 차동모드 피드백 루프에서 duty를 생성하기 위해서 전류 분배기 회로를 사용하여 공통모드 피드백에 의한 duty에 따라 dead-time이 유동적으로 변하는 톱니파형을 만드는 회로인 Dead-time을 갖는 톱니파 발생기를 추가하여 차동모드 피드백 회로를 구성하였다. 0.35um 공정을 사용하여 설계한 SIDO DC-DC Converter는 2.5V 입력으로부터 2.8V와 4.2V의 전압을 출력하며 최대 전력변환 효율은 95%이다. 출력간의 Cross regulation은 출력전류가 2배씩 증가할 경우 Boost1과 Boost2의 출력전압은 각각 3.57%, 4% 수준을 보이고 있다.

• Structural Engineering and Mechanics
• /
• 제65권1호
• /
• pp.9-17
• /
• 2018

This study concerns about calculating exact natural frequencies of frames using a single variable shear deformation theory (SVSDT) which considers the parabolic shear stress distribution across the cross section. Free vibration analyses are performed for multi-bay, multi-storey and multi-bay multi-storey type frame structures. Dynamic stiffness formulations are derived and used to obtain first five natural frequencies of frames. Different beam and column cross sections are considered to reveal their effects on free vibration analysis. The calculated natural frequencies are tabulated with the results obtained using Euler-Bernoulli Beam Theory (EBT) and Timoshenko Beam Theory (TBT). Moreover, the effects of inner and outer columns on natural frequencies are compared for multi-bay frames. Several mode shapes are plotted.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2002년도 추계학술대회 논문집
• /
• pp.7-10
• /
• 2002

A novel two-phase PIV algorithm using a single camera has been proposed, which introduces a method of image-separation into respective phase images, and is applied to freely rising single bubble. Gas bubble, tracer particle and background each have different gray intensity ranges on the same image frame when reflection and dispersion in the phase interface are intrinsically eliminated by optical filters and fluorescent material. Further, the signals of the two phases do not interfere with each other. Gas phase velocities are obtained from the separated bubble image by applying the two-frame PTV. On the other hand, liquid phase velocities are obtained from the tracer particle image by applying the cross-correlation algorithm. Moreover, in order to increase the SNR (signal-to-noise ratio) of the cross-correlation of tracer particle image, image enhancement is employed.

• 산업경영시스템학회지
• /
• 제41권3호
• /
• pp.170-175
• /
• 2018

While the term online shopping refers to all online transactions, cross-border online shopping means shopping activities purchasing products or services over the internet for the customers abroad. As Internet use for the international shopping activity increasing, cross border online shopping has grown substantially for last decade. This study is about the problem regarding the cross border online shopping for two different countries and the variables that influence their shopping behavior. The cross border online shopping has been increased by the growth of Internet access. However, the growth of the Internet use does not guarantee a successful development of cross border e-commerce for every country. To find out the perception for cross-border online shopping for two different cultures, shoppers from two countries with different cultural background were chosen, and the perception for cross-border online shopping from each culture is contrasted. For statistical Analysis, ANOVA is used to find the relationship between a single non-metric independent variable, and multiple metric dependent variables. Hofstede's cultural dimensions model is adopted for this study as a tool to find out the patterns of cross border online shopping. This study showed what the variables would affect the perception in cross border online shopping. The results of this study indicated that cross border online shoppers with different culture were notably different on two variables identified-timeliness and ease of use.