• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2004년도 학술발표회
• /
• pp.463-467
• /
• 2004

Rosette-type diffusers with four-ports per riser are constructed in relatively shallow water in Korea. However, the trajectorial bending phenomena due to lower-pressure inside the surrounded buoyant jets on the riser was not considered in most models and was not observed without any experimental results. The buoyant jet behavior affected by the bending effect where there have been growing interests need to be verified experimentally and need to be preceded in the analysis of the characteristics of the buoyant jets oil a riser. The hydraulic model experiments have been carried out to investigate the characteristics of the behavior of horizontal buoyant jets discharged from a Rosette-type riser with four ports as well as single port over a certain range of the experimental conditions including initial momentum and initial buoyancy using LIF (Laser Induced Fluorescence) system to obtain concentration fields. The intensity of the fluorescent light in each pixel on the images obtained from LIF system with the tracer of Rhodamine H was converted to the local dye concentration with a set of calibration procedures to account for the non-uniform distribution of light intensity and the attenuation of light energy by water medium. The experimental results shows that the trajectories from Your ports tend to bend more and more to the inner side with the increase of the densimetric Froude number while the buoyant jet from a single port rises up without any bending phenomena. The previous models, VISJET and Seo et al. (2002), do not simulate the trajectories well except the region before the bending section. This study will focus on the analysis of the behavior of the buoyant jets for mainly a Rosette-type riser by conducting hydraulic model experiments using LIF system.

• 대한설비공학회지:설비저널
• /
• 제16권1호
• /
• pp.89-102
• /
• 1987

Experiments have been carried out to study the atomisation characteristics of superheated liquid(water) jet injected into the atmosphere through a single-hole nozzle. In present experi-mental range, superheated liquid jet has been observed to be atomised in two-phase effluent type; that is, spray formed by the bubble nucleation in the nozzle. In case of liquid injection through a long nozzle (L/D=29.09), the critical superheat for occurrence of two-phase effluent atomisa-tion can be determined from sudden change of spray angle. Sauter mean diameter of the spray droplets decreases as the degree of superheat increases. For the short nozzle (L/D=7.27), mean diameter increases with the injection pressure, while it decreases for the long nozzle; however for the long nozzle the effect of injection pressure is not significant compared with the short nozzle. For the short nozzle the uniformity of drop size distribution increases with increasing the degree of superheat, but for the long nozzle the effect of superheat on the uniformity is not appreciable.

• Nuclear Engineering and Technology
• /
• 제54권5호
• /
• pp.1835-1844
• /
• 2022

Single-orifice plate is wildly utilized in the piping system of the nuclear power plant to throttle and depressurize the fluid of the pipeline. The cavitation induced by the single-orifice plate may cause some serious vibration of the pipeline. This study aims to find the optimal designs of the single-orifice plates that may have weak cavitation possibilities. For this purpose, a new single-orifice plate with a convergent-flat-divergent hole was modeled, a multi-objective optimization method was proposed to optimize the shape of a single-orifice plate, while computational fluid dynamics method was adopted to obtain the fluid physical quantities. The reciprocal cavitation number and the developmental integral were treated as cavitation indexes (e.g., objectives for the optimization algorithm). Two non-dominant designs ultimately achieved illustrated obvious reduction in the cavitation indexes at a Reynolds number Re = 1 ×10⁵ defined based on fluid velocity. Besides, the sensitivity analysis and temperature effects were also performed. The results indicated that the convergent angle of the single-orifice plate dominants the cavitation behavior globally. The optimal designs of single-orifice plates result in lower downstream jet areas and lower upstream pressure. For a constant Reynolds number, the higher temperature of liquid water, the easier it is to undergo cavitation. Whereas there is a diametric phenomenon for a constant fluid velocity. Moreover, the regression models were carried out to establish the mathematical relation between temperature and cavitation indexes.

• 한국지반환경공학회 논문집
• /
• 제16권8호
• /
• pp.5-12
• /
• 2015

연구대상은 건축물에 지하부의 이용 극대화 목적으로 지하부의 부력에 대한 부력 저항용 앵커를 고려하였다. 그러나 투수계수가 크고 지하수 유속이 빠른 화산쇄설층에서 앵커 천공부를 통해 지하수가 급격히 유출되어 앵커체 삽입이 불가능하였다. 또한 억지로 삽입된 앵커공에서는 계속적으로 많은 양의 해수와 시멘트가 유출되었으며, 앵커의 일부는 지반에 정착이 되지 않는 현상이 발견되었다. 이러한 문제를 해결하기 위한 지하수 차단방법으로 초고압 분사교반 공법을 적용하였고, 그중 단일공 차수방법을 채택하여 부력방지앵커를 설치하였다. 본 연구에서는 초고압 분사교반 공법을 이용한 단일공 차수방법을 현장에 적용하고 3회에 걸친 시험시공을 통해 본 시공 시험에 적용할 주입재를 결정하였고 투수시험, 코어채취 표준관입시험 일축압축강도시험을 통하여 차수효과 및 지반개량 정도를 확인하였다. 또한 부력방지앵커의 설치 및 인장시험을 통해 앵커의 안정성을 확보하여 화산쇄설층에서 단일 차수공법의 적용성을 검증하였다.

• 열처리공학회지
• /
• 제25권4호
• /
• pp.181-189
• /
• 2012

The demand on quantitative measurement of the heat flux is motivated in making higher-quality steel product through a water quenching process of plate mill. To improve a spatial degree of heat flux measurement, the multi-point heat flux measurement was carried out by a unique experimental technique that has a combination of the existing single-point heat flux gauge. The corresponding heat flux can be easily determined by Fourier's law in a conventional way. The multi-point heat flux gauge developed in this study can be applicable to measure the surface heat flux, the surface heat transfer coefficient during a water quenching applications of steelmaking process. The results exhibit different heat transfer regimes; such as single-phase forced convection, nucleate boiling, and film boiling, that are occurred in close proximity on the multi-point heat flux gauge quenched by water impinging jet.

• 물과 미래
• /
• 제27권3호
• /
• pp.35-43
• /
• 1994

여수로 하류부의 감세지내 세굴이 설계 기준치 이상으로 진전될 경우 여수로나 댐의 구조적 안정성을 위협하게 되는 심각한 상황이 야기되므로 감세지내의 극한 세굴깊이 예측에 대한 많은 연구들이 이루어져왔으나 감세지의 설계에 필수적인 세굴능의 분포특성에 대한 연구는 거의 이루어지지 않았다. 따라서 본 연구에서는 여수로나 관거로부터 방류되는 이 비점착성 하상에 도달되는 원형의 이상적인 모델을 개발하여 감세지 하상에서의 세굴능 분포를 측정하였다. 실험 연구결과 동일한 입사각의 경우 세굴분포는 의 수리학적 특성이나 감세지 깊이에 관계없이 실험 범위내에서는 기하학적으로 유사하다는 사실과 감세지의 설계목적만을 위한 세굴능의 분포형태는 의 입사각에 관계없이 실험 범위내에서는 하나의 식으로 표현될 수 있다는 사실을 통계학적 분석을 통하여 알아내었다. 또한 유도된 세굴분포식을 이용한 결과 실측치와 잘 일치됨을 확인하였다. 잘 일치됨을 확인하였다.

• 한국수자원학회논문집
• /
• 제30권4호
• /
• pp.401-409
• /
• 1997

본 연구는 하천 및 저수지의 하상변동을 예측하기 위하여 하천을 단일 수로로 취급하였으며 저수지는 몇 개의 수로로 나누어 유량의 합성모형, 2차원 분류모형 및 1차원 밀도류모형을 이용하였다. 수치모형은 유량의 연속방정식과 운동량방정식을 double-sweep method로 유량과 수위의 변동량을 구한 후, 수위 및 유량의 변동량을 유사의 연속방정식에 적용하여 하상의 세굴 및 퇴적으로 인한 하상고의 변동량을 예측하였다. 본 연구대상 구역은 보성강댐에서 주암댐의 상류지역인 문덕교까지 약 31km구간을 선정하였으며 하천이 약 13km, 저수지 부분이 약 18km이다.

• 한국해안해양공학회지
• /
• 제17권4호
• /
• pp.259-268
• /
• 2005

여름에 기본적으로 방조제 내부로부터 담수의 유입으로 발생된 저 간소 수괴가 저서생물의 감소를 야기시키기 때문에 영산강 하구언에서 저 산소층의 제거에 대한 관심이 증폭되어왔다. 처리된 하$\cdot$ 폐수를 해양에 방류하는 해양방류시스템이 이러한 저 산소층을 제거하는 효율적이고 경제적인 방법으로 이용되어 질 수 있다. 본 연구에서는 근역에서 방류된 부력제트의 거동을 예측하고자 적절한 방류구의 설계가 제안되었다. 신뢰할 수 있는 부력제트의 거동에 대한 계산을 수행하기 위하여 측정된 CTD와 해류 자료 등을 포함한 인자들이 고려되어졌다. 조석의 주기에 따라 계산된 부력제트의 경계 내에 염분도와 용존산소의 횡분포의 변화를 예측하고자 여러 수치 모형중의 하나로 EPA에 의해 승인된 CORMIX 1 모형을 사용하였다. 수치실험의 결과를 기준으로 볼 때 단공방류구가 저 산소층을 제거하는데 유용한 시스템임을 알 수 있었다. 원활한 주변수의 조건을 만족시키기 위하여 적절한 전략이 또한 제안되어졌다.

• 대한치과보철학회지
• /
• 제43권1호
• /
• pp.52-60
• /
• 2005

Purpose. The intent of this study was to evaluate the effects of curing conditions on self-curing denture base resins to find out proper condition in self-curing resin polymerization. Materials and methods, In this study, 3 commercial self-curing denture base resins are used Vertex SC, Tokuso Rebase and Jet Denture Repair Acrylic. After mixing the self curing resin, it was placed in a stainless steel mold(3$\times$6$\times$60mm). The mold containing the resin was placed under the following conditions: in air at 23$^{\circ}C$; or in water at 23$^{\circ}C$; or in water at 23$^{\circ}C$ under pressure(20psi); or in water at 37$^{\circ}C$ under pressure(20psi) or in water at 50$^{\circ}C$ under pressure(20psi) , or in water at 65$^{\circ}C$ under pressure(20psi), respectively. Also heat-curing denture base resin is polymerized according to manufactures' instructions as control. Fracture toughness was measured by a single edge notched beam(SENB) method. Notch about 3mm deep was carved at the center of the long axis of the specimen using a dental diamond disk driven by a dental micro engine. The flexural test was carried out at a crosshead speed 0.5mm/min and fracture surface were observed under measuring microscope. Results and conclusion . The results obtained were summarized as follows : 1. The fracture toughness value of self-curing denture base resins were relatively lower than that of heat-curing denture base resin. 2. In Vertex SC and Jet Denture Repair Acrylic, higher fracture toughness value was observed in the curing environment with pressure but in Tokuso Rebase, low fracture toughness value was observed but there was no statistical difference. 3. Higher fracture toughness value was observed in the curing environment with water than air but there was no statistical difference. 4. Raising the temperature in water showed the increase of fracture toughness.

• 한국가시화정보학회지
• /
• 제15권2호
• /
• pp.21-25
• /
• 2017

If a liquid droplet evaporates on a solid substrate, when it completely dries, it leaves a peculiar pattern, which depends on the composition of the liquid. Not only a single component liquid but also complex liquids are studied for a different purpose. In particular, a binary mixture droplet has been widely studied and used for an ink-jet printing technology. In this study, we focus on investigating to visualize the internal flow field of an ethanol-water mixture by varying a concentration ratio between two liquids. We measure the in-plane velocity vector fields and vorticities. We believe that this fundamental study about the internal flow field provides a basic idea to understand the dried pattern of the binary mixture droplet.