• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 International Symposium
• /
• pp.219-225
• /
• 2002

This paper presents a novel "bumpless flip chip package"for cost! performance driven devices. Using the conventional electroplating and etching processes, this package enables the production of fine pitch BGA up to 256 I/O with single layer routing. An array of circuitry down to $25-50{\mu}{\textrm}{m}$ line/space is fabricated to fan-in and fan-out of the bond pads without using bumps or substrate. Various types of joint methods can be applied to connect the fine trace and the bond pad directly. The resin-filled terminal provides excellent compliancy between package and the assembled board. More interestingly, the thin film routing is similar to wafer level packaging whereas the fan-out feature enables high lead count devices to be accommodated in the BGA format. Details of the design concepts and processing technology for this novel package are discussed. Trade offs to meet various cost or performance goals for selected applications are suggested. Finally, the importance of design integration early in the technology development cycle with die-level and system-level design teams is highlighted as critical to an optimal design for performance and cost.

• 한국결정성장학회지
• /
• 제34권1호
• /
• pp.1-7
• /
• 2024

β-Ga₂O₃는 ~4.8 eV의 넓은 밴드 갭과 8 MV/cm의 높은 항복 전압을 가지는 물질로 전력소자의 응용 분야에서 많은 주목을 받고 있다. 또한, 대표적인 WBG 반도체 소재인 SiC, GaN, 다이아몬드 등과 비교했을 때, 높은 성장률과 낮은 제조 비용으로 단결정 성장이 가능하다는 장점을 가진다[1-4]. 본 연구에서는 다중 슬릿 구조를 이용한 EFG(Edge-defined Film-fed Growth) 법을 통해 SnO₂ 0.3 mol% 도핑된 10 mm 두께의 β-Ga₂O₃ 단결정을 성장시키는 데에 성공했다. 성장 방향과 성장 면은 각각 [010]/(001)로 설정하였으며 성장 속도는 약 12 mm/h이다. 성장시킨 β-Ga₂O₃ 단결정은 다양한 결정면(010, 001, 100, ${\bar{2}}01$)으로 절단하여 표면 가공을 진행하였다. 가공이 완료된 샘플은 XRD, UV/VIS/NIR Spec., Mercury Probe, AFM, Etching 등의 분석을 통해 결정면에 따른 특성을 비교하였다. 본 연구는 고전압 및 고온 응용 분야에서 전력반도체 기술의 발전에 기여할 것으로 기대되며 더 나은 특성의 기판을 선택하는 것은 소자의 성능과 신뢰성을 향상시키는데에 중요한 역할을 할 것이다.

• 대한치과보철학회지
• /
• 제40권3호
• /
• pp.262-268
• /
• 2002

Statement of problem. In-Ceram system is one of the all-ceramic crowns that can be used in anterior 3 unit fixed partial dentures and posterior single crowns. The alumina core used in In-Ceram system is manufactured using slip-casting technique. The slip-casting technique is difficult and technique sensitive. To improve this problem, tape-casting method was introduced into dentistry. There were no studies to examine the effect of margin design on the margin fitness of all-ceramic crowns fabricated from alumina tape. Purpose. The purpose of this study was to compare the marginal fitness of glass infiltrated alumina core fabricated from aqueous-based alumina tape according to different margin types ($90^{\circ},\;110^{\circ},\;135^{\circ}$ shoulder margin). Material and method. Three upper central resin incisors were prepared with $90^{\circ},\;110^{\circ}$, and $135^{\circ}$ shoulder margins for all-ceramic crowns, respectively. The resin teeth were duplicated and master die and special plaster die were made as usual. After alumina cores were fabricated from aqueous-based alumina tape, cores were cemented to each 15 epoxy dies replicated from three resin teeth with resin cement. These cemented cores were embedded in epoxy resin. Specimens were cut mesiodistally and buccolingually. Marginal gap and discrepancy were measured under microscope. Results. The marginal gap and discrepancy of $90^{\circ}$ marginal angle was $75.1{\mu}m,\;86.6{\mu}m,\;110^{\circ}$ marginal angle was $41.5{\mu}m,\;50.7{\mu}m$ and $135^{\circ}$ marginal angle was $51.7{\mu}m,\;54.2{\mu}m$, respectively. The smallest value was seen in 110 (angle, which was statistically significant compared to that of $90^{\circ}$ angle (p<0.05). Conclusion. Marginal fitness of alumina cores made of alumina tape with $110^{\circ}$ shoulder margin was best and others were clinically acceptable.

• 공업화학
• /
• 제17권3호
• /
• pp.267-273
• /
• 2006

Melt-blown 방사법으로 Ba-ferrite 포함하는 PP 복합수지를 방사하여 부직포 섬유를 제조하는 공정에서 방사공정인자와 부직포 특성과의 상관관계를 조사하였다. PP 수지와 Ba-ferrite 분말을 혼합한 후 단축 압출 성형기를 이용하여 펠렛 형태로 제조하고 Melt-blown 섬유 방사기를 이용하여 screw turning force (rpm)와 DCD (die-to-collector distance)를 변화시켜 Ba-ferrite 분말이 부직포 섬유의 기계적, 열적, 결정학적 및 자성 특성에 미치는 영향을 조사하였다. SEM 관찰을 통하여 방사 거리가 증가할수록 혹은 screw turning force가 감소할수록 부직포 섬유의 연신율이 증가하고, 섬유의 직경 및 인장강도가 감소하는 것을 알 수 있었고, XRD 측정 결과로부터 방사거리의 증가는 섬유의 결정성을 높이는 것으로 관찰되었다. 복합 부직포에서는 입자가 고분자와 분리되어 고분자와 입자간의 결합력이 떨어져 순수한 PP대비 인장강도가 감소하였다. Ba-ferrite 분말에 의한 부직포의 자성적 성질을 보면 방사거리에 따라 보자력, 최대 자화, 잔류 자화 값은 감소하였다. TGA 측정을 통한 부직포 섬유의 내열성 시험 결과는 방사거리의 감소에 따라 내열성이 증가하였으며 난연성은 Ba-ferrite 분말의 함량 증가에 따라 증가하였다.

• 자원리싸이클링
• /
• 제24권2호
• /
• pp.36-45
• /
• 2015

본 연구에서는 초음파 처리기가 die에 장착된 일축 스크류식 압출기를 이용하여 다양한 크기의 폐타이어 분말을 탈황시켰고, 치합형 이축 스크류식 압출기를 이용하여 재생 폴리프로필렌/탈황된 폐타이어 분말 복합체를 제조하였다. 40, 80, 140 mesh 크기의 탈황되지 않은 폐타이어 분말과 탈황된 폐타이어 분말의 가교밀도와 탈황도를 계산하였고 각각의 기계적 특성을 비교하였다. 또한, 재생 폴리프로필렌과 탈황 전과 탈황 후의 폐타이어 분말 복합체에 대한 상용화제 SEBS-g-MA의 효과를 조사하였다. 가교밀도는 폐타이어 분말의 크기가 작아질수록 감소하였다. 반면에 탈황도는 작은 크기의 폐타이어 분말이 첨가될수록 증가하였다. 탈황된 폐타이어 분말이 첨가된 복합체의 인장강도, 충격강도, 신장률은 탈황되지 않은 폐타이어 분말이 첨가된 복합체보다 크게 증가했으며 첨가된 폐타이어 분말의 크기가 작을수록 복합체의 기계적 특성이 더욱 향상되었다. 재생 폴리프로필렌과 탈황 전과 탈황 후의 폐타이어 분말 복합체에 SEBS-g-MA를 첨가하였을 때 충격강도와 신장률이 큰 폭으로 증가하는 것이 관찰되었다.

• Design & Manufacturing
• /
• 제11권2호
• /
• pp.51-56
• /
• 2017

Nitinol, a shape memory alloy (SMA), is manufactured from titanium and nickel and it used in various fields such as electrical applications, micro sensors. It is also recommended as a material in medical for implant because it has excellent organic compatibility. Nitinol is intended to be inserted into the human body, products require a high-quality surface and low residual stress. To overcome this problems, explore electrolyte polishing (EP) is being explored that may be appropriate for use with nitinol. EP is a particularly useful machining method because, as a non contact machining method, it produces neither machining heat nor internal stress in the machined materials. Sandpaper polishing is also useful machining method because, as a contact machining method, it can easily good surface roughness in the machined materials. The electrolyte polishing (EP) process has an effect of improving the surface roughness as well as the film polishing process, but has a characteristic that the residual stress is hardly generated because the work hardened layer is not formed on the processed surface. The sandpaper polishing process has the effect of improving the surface roughness but the residual stress remains in the surface. We experimented with three conditions of polishing process. First condition is the conventional polishing. Second condition is the electrochemical polishing(EP). And Last condition is a mixing process with the conventional polishing and the EP. Surface roughness and residual stress of the nitinol before a polishing process were $0.474{\mu}mRa$, -45.38MPa. Surface roughness and residual stress of the nitinol after mixing process of the conventional polishing and the EP were $1.071{\mu}mRa$, -143.157MPa. Surface roughness and residual stress of the nitinol after conventional polishing were $0.385{\mu}mRa$ and -205.15MPa. Surface roughness and residual stress of sandpaper and EP nitinol were $1.071{\mu}mRa$, -143.157MPa. The result shows that the EP process is a residual stress free process that eliminates the residual stress on the surface while eliminating the deformed layer remaining on the surface through composite surface machining rather than single surface machining. The EP process can be used for biomaterials such as nitinol and be applied to polishing of wafers and various fields.

• Design & Manufacturing
• /
• 제13권2호
• /
• pp.30-36
• /
• 2019

Traditional cell culture(2-dimensional) is the method that provide a nutrient and environment on a flat surface to cultivate cells into a single layer. Since the cell characteristics of 2D culture method is different from the characteristics of the cells cultured in the body, attempts to cultivate the cells in an environment similar to the body environment are actively proceeding in the industry, academy, and research institutes. In this study, we will develop a technology to fabricate micro-structures capable of culturing cells on surfaces with various curvatures, surface shapes, and characteristics. In order to fabricate the hemispheric plastic structure(thickness $50{\mu}m$), plastic preform mold (hereinafter as "preform mold") corresponding to the hemisphere was first prepared by injection molding in order to fabricate a two - layer structure to be combined with a flat plastic film. Then, thermoplastic polymer dissolved in an organic solvent was solidified on a preform mold. As a preliminary study, we proposed injection molding conditions that can minimize X/Y/Z axis deflection value. The effects of the following conditions on the preform mold were analyzed through injection molding CAE, [(1) coolant inlet temperature, (2) injection time, (3) packing pressure, (4) volume-pressure (V/P). As a result, the injection molding process conditions (cooling water inlet temperature, injection time, holding pressure condition (V / P conversion point and holding pressure size)) which can minimize the deformation amount of the preform mold were derived through CAE without applying the experimental design method. Also, the derived injection molding process conditions were applied during actual injection molding and the degree of deformation of the formed preform mold was compared with the analysis results. It is expected that plastic film having various shapes in addition to hemispherical shape using the preform mold produced through this study will be useful for the molding preform molding technology and cast molding technology.

• 한국노년학
• /
• 제30권1호
• /
• pp.241-260
• /
• 2010

이 연구의 목적은 쪽방지역에 홀로 사는 남성 노인의 삶의 경험이 갖는 의미와 본질을 밝힘으로서 이들의 경험에 대한 좀 더 풍부한 이해를 하는 것이다. 연구 참여자는 Y 쪽방지역에 거주하는 65세 이상 독거 남성 8명이다. 의도표집방법과 눈덩이 표집 방법을 사용하였으며, 포커스 집단 면담과 개별심층면담을 통해 자료를 수집하였다. 자료의 분석은 Giorgi의 4단계에 의거하였다. 연구결과 4개의 구성요소와 16개의 하위구성요소가 도출되었다. 쪽방에 홀로 사는 남성 노인들의 삶의 4가지 구성요소는 <마음 둘 곳 없어 외로운 신세: 아들, 남편, 아비구실 못해 가족을 지우고 살아옴, 몸은 머물지만 정들지 않는 쪽방 살이, 하루짜리 술친구에 머무는 사귐, 외로움을 안고가기>,<인색한 지원에 근근이 살아감: 쪽방처럼 사방이 막힌 인생살이에 우울함, 수급자라 휘둘리고 무시 받아 속상함>,<편견과 차별에 주눅 드는 삶: 아쉬워도 손 벌리지 못함, 가족을 꾸리지 못해 후회되고 냉대 받음, 다가가지 못하는 바깥세상 >,<사람노릇하며 살다가기: 홀로의 삶을 건사하여 독립을 유지하려함, 빚 갚는 마음으로 도움주기, 하릴없이 보내는 나날이 고역이라 일을 하고 싶음, 쪽방 사람들과 다르게 살아가기, 어른도리 하기, 마음을 다스려 현재의 삶을 수용함, 폐가 되지 않을 죽음을 준비하기>로 나타났다. 이러한 결과를 바탕으로 쪽방지역에 홀로 사는 남성 노인들의 삶의 경험에 대한 의미를 논의하고 사회복지적 함의와 후속 연구를 위한 제언을 제시하였다.

• 산업경영시스템학회지
• /
• 제39권4호
• /
• pp.90-96
• /
• 2016

Incremental sheet forming (ISF) is a highly versatile and flexible process for rapid manufacturing of complex sheet metal parts. Compared to conventional sheet forming processes, ISF is of a clear advantage in manufacturing small batch or customized parts. ISF needs die-less machine alone, while conventional sheet forming requires highly expensive facilities like dies, molds, and presses. This equipment takes long time to get preparation for manufacturing. However, ISF does not need the full facilities nor much cost and time. Because of the facts, ISF is continuously being used for small batch or prototyping manufacturing in current industries. However, spring-back induced in the process of incremental forming becomes a critical drawback on precision manufacturing. Since sheet metal, being a raw material for ISF, has property to resilience, spring-back would come in the case. It is the research objective to investigate how geometrical shaping parameters make effect on shape dimensional errors. In order to analyze the spring-back occurred in the process, this study experimented on Al 1015 material in the ISF. The statistical tool employed experimental design with factors. The table of orthogonal arrays of $L_8(2^7)$ are used to design the experiments and ANOVA method are employed to statistically analyze the collected data. The results of the analysis from this study shows that the type of shape and the slope of bottom are the significant, whereas the shape size, the shape height, and the side angle are not significant factors on dimensional errors. More error incurred on the pyramid than on the circular type in the experiments. The sloped bottom showed higher errors than the flat one.

• Nutritional Sciences
• /
• 제8권4호
• /
• pp.226-230
• /
• 2005

To keep blood glucose levels as close to normal as possible is the major goal of diabetes mellitus treatment $\alpha$-Glucosidase is the enzyme that digests die1my carbohydrate and inhibition of this enzyme may suppress postprandial hyperglycemia. The methanol extract of Polygonum multiflorum Thunberg was tested for inhibitoty activity against $\alpha$-glucosidase in vitro and in vivo. Polygonum multiflorum Thunberg extract inhibited yeast $\alpha$-glucosidase activity in a concentration-dependent manner. Polygonum multiflorum Thunberg showed an $IC_{50}$ value of 0.48 mg/mL. The ability of Polygonum multiflorum Thunberg extract to lower postprandial glucose was studied in streptozotocin-induced diabetic rats. A starch solution (1 g/kg) with and without the methanol extract of Polygonum multiflorum Thunberg extract (500 mg/kg) was administered to diabetic rats by gastric intubation after an overnight fast A single oral dose of Polygonum multiflorum Thunberg extract significantly inhibited increases in blood glucose levels at 60 and 90 min (p<0.05) and significantly decreased incremental response areas under the glycemic response curve (p<0.05). These results suggest that Polygonum multiflorum Thunberg may have an antihyperglycemic effect by inhibiting $\alpha$-glucosidase activity in the animal model of diabetes mellitus.