• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.1982-1990
• /
• 2022

The purpose of this study was to verify the possibility of fuel rod pattern analysis in a fresh fuel assembly using the Yonsei single-photon emission computed tomography (YSECT) system. The YSECT system consisted of three main parts: four trapezoidal-shaped bismuth germanate scintillator-based 64-channel detectors, a semiconductor-based multi-channel data acquisition system, and a rotary stage. In order to assess the performance of the prototype YSECT, tomographic images were obtained for three representative fuel rod patterns in the 6 × 6 array using two representative image-reconstruction algorithms. The fuel-rod patterns were then assessed using an in-house fuel rod pattern analysis algorithm. In the experimental results, the single-directional projection images for those three fuel-rod patterns well discriminated each fuel-rod location, showing a Gaussian-peak-shaped projection for a single 10 mm-diameter fuel rod with 12.1 mm full-width at half maximum. Finally, we successfully verified the possibility of the fuel rod pattern analysis for all three patterns of fresh fuel rods with the tomographic images obtained by the rotational YSECT system.

• 한국군사과학기술학회지
• /
• 제26권2호
• /
• pp.122-128
• /
• 2023

The target must be located within the main-lobe of the antenna in order to measure the direction of the target by using sum-delta monopulse technique. The most common way if the target is located within the main-lobe is to compare the amplitude of the sum channel received signal with the delta channel received signal. However, in the case of the single-ring circular array antenna, it is difficult to apply the conventional method due to its structural limitation where antenna elements do not exist in the center of the array. In this paper, we proposed a novel method to identify whether a target is located within the main-lobe by appropriately adjusting the feeding amplitude of each element constituting the single-ring circular array antenna through the particle swarm optimization method. Simulation results showed that the proposed method can determine whether the target is located within the main-lobe of the single-ring circular array antenna.

• ETRI Journal
• /
• 제35권5호
• /
• pp.919-922
• /
• 2013

A MIMO multi-way relay channel with full data exchange in which K users exchange messages with each other via the help of a single relay is considered. For the case in which each link is quasi-static Rayleigh fading and the relay is full-duplex, the fundamental diversity-multiplexing tradeoff (DMT) is investigated, and we show that a compress-and-forward relay protocol can achieve the optimal DMT.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 V
• /
• pp.2609-2612
• /
• 2003

This paper describes a 64 channel signal generator/analyzer module that is useful for verification and testing of digital circuits. It can perform logic analyzer function and signal generator function at the same time. The 64 Channel module is implemented with single FPGA chip for miniaturization, and an USB interface is used to increase portability of the module. Multiple modules can be used in parallel for the verification of large scale circuits. Moreover, since the module is implemented as a PC based system, one can configure convenient GUI(Graphic User Interface) environment.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.269-273
• /
• 1990

The proton conserving effect of diffusion with self-aligned SiO2-cladding is investigated by infrared transmission spectra. Based on the proton conserving effect, proton-diffused channel waveguides with self-aligned SiO2-cladding substrates. And an electro-optic cutoff modulator with self aligned electrode that utilizes a single-mode proton-diffused channel waveguide in a Y-cut XX-propagating LiNbO3 substrate is fabricated. Over 20 dB extinction has been achieved with applied voltage of 15V.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(2)
• /
• pp.317-320
• /
• 2000

We have calculated the optimum refractive index and thickness for a single layer antireflection coating as a function of active layer width and thickness in buried channel waveguides. The results using the variational method to obtain the field profiles are compared to those using the effective index method.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2002년도 학술대회지
• /
• pp.803-806
• /
• 2002

The dispersion of Lagrangian fluid particles in a turbulent channel flow is studied by a direct numerical simulation. Four points Hermite interpolation in the homogeneous direction and Chebyshev polynomials in the inhomogeneous direction is adopted by assesing the acceleration of fluid particles. In order to characterize the inhomogeneous Lagrangian statistics, accurate single particle Lagrangian statistics are obtained along the wall normal direction. Integral time scales of Lagrangian velocity can be normalized by Eulerian mean shear stresses.

• 대한음성학회지:말소리
• /
• 제45호
• /
• pp.93-105
• /
• 2003

In this paper, we present a single framework based on GMM for speaker recognition. The proposed framework can simultaneously minimize environmental variations on mismatched conditions and adapt the bias free and speaker-dependent characteristics of claimant utterances to the background GMM to create a speaker model. We compare the closed-set speaker identification for conventional method and the proposed method both on TIMIT and NTIMIT. In the several sets of experiments we show the improved recognition rates on a simulated channel and a telephone channel condition by 7.2% and 27.4% respectively.

• 광산업정보
• /
• 통권17호
• /
• pp.10-19
• /
• 2003

We have developed a single integrated wavelengh selection type - 8channel light source module. This module oscillates in 8 wavelengh at 200GHz(1.6nm) ITU channel intervals within the c-band (1530~1560nm), and can transmit at 1.25Gbps level.

• 대한전자공학회논문지
• /
• 제27권4호
• /
• pp.547-554
• /
• 1990

Considering channel length modulation, we proposed a GaAs MESFET model for circuit simulator. In existing M.S. Shur's model, two different models are used according to pinch-off voltage of devices. One model for both type of devices was proposed. In this model we introduced weighted switching function(WSF) based on channel length modulation. This proposed model showed better accuracy comparing with existing single law model and complete velocity saturation model.