• 대한토목학회논문집
• /
• 제14권6호
• /
• pp.1299-1308
• /
• 1994

본 연구는 사장교의 차량하중에 의한 동적거동을 파악하고자 수치해석상 비교적 간단한 일본의 풍리(豊里)(Toyosato)대교(大橋)의 자료를 근거로하여 수치해석 대상모델을 구조형식별로, 여러가지 설계변수-즉, (1) 경간비, (2) 중앙경간장과 주탑높이와의 비, (3) 거어더의 강성, (4) 주탑의 강성, (5) 케이블의 강성-을 변화시켜 수치해석을 수행하여 동적거동을 파악하고, 그 결과를 가지고 설계변수의 영향 및 충격계수의 변화에 대하여 비교 분석하였다. 이때 변위 및 단면력의 영향선을 구하기 위한 해석은 전달행렬법을 이용하였으며, 동적해석에 있어서는 평면구조계의 집중질량계로 모델을 가정하여 차량과 교량의 운동방정식을 유도한 후 모드중첩법을 사용하여 각 질점에 대한 변위 및 단면력의 동적시간이력을 구하였다.

• 한국과학교육학회지
• /
• 제2권1호
• /
• pp.31-51
• /
• 1980

In order to research into the devel of the concept of movement and speed in our own way and compare with the Piaget's method, and then find out the formative period of such development, we have put the 192 primary school children as the model and obtained the following results. 1. As their grade upyards, all the experimental subjects showed the gradual progress generally regardless of sex or regions, while only the relative speed showed irregular progress. 2. There was no experimental subject which showed any remarkable sexual characteristics. But in the relative movement, the lower grade boys and higher grade girls made progress. In the subjects of circulation movement, intuition of speed, relative speed and speed of simultaneous movement, the boys marked better progress, whilst the girls were advanced a little in the speed of continuous movement with, different distance and time. 3. There was no conspicuous difference between the urban and rural areas, except a slight tendency that the urban children made better progress in the change of progressing direction, native continuous procedure of periodical movement, travelling road, and the speed of continuous movement with different distance and time whereas the rural children were more advanced in the relative movement, relative speed and intuition of speed. But it should be 'taken into consideration that the rural regions in our case were relatively developed in comparison with the traditional rural communities, which may explain about little regional difference. 4. Comparing our research results with the Piaget's theory, we have reached below results. Our research reports that the formative period of the conception of the problems of diverse progressing direction and a native continuous procedure of periodical movement was simultaneous, at the Piagetian level(at the fourth grade) which coincides with Piagetian theory. The travelling road should be made up a little lower at 2A/2B according' to Piagetian Level, whereas it was formed at the 4th grade as shown in our previous research. Intuition of speed should belong to the prior stage to concrete operation, but our research shows it was formed late at the 4th grade. Composition of displacement was made at the 6th grade, and it was almost equal to the first stage of formal operation(3A). But in the subjects of relative movement relative speed, the speed of continuous movement with different distance and time, relation and preservation of invariable speed, and accelerated motion, even 6th grade children marked a poor record. Summed up, the procedure conception as a basic movement conception coincides with the Piagetion level. But as for speed intuition, relative speed and speed fixation, it was Jar behind Piagetian level. Therefore it is required that we have to concentrate on the systematic training in these parts on the spot.

• 지구물리와물리탐사
• /
• 제10권3호
• /
• pp.191-202
• /
• 2007

한반도 남부지역의 세부적인 지진파 감쇠특성 규명을 위해, 기존에는 적용이 불가능하였던 Q 토모그래피 역산을 위한 사전 수치검증 연구를 수행하였다. 특히 강지진동모사를 위해 일반적으로 사용되고 있는 추계학적 점지진원 지진동 모델(stochastic point-source ground-motion model; Boore, 2003)에서 사용되는 Q 값에 대한 2차원(2D; 2 Dimensional) 토모그래피 역산을 시도함으로써 역산 결과가 강지진동모사에 직접 활용될 수 있도록 하였다. 수치검증 방법으로는 Q 토모그래피 checkerboard 시험방법이 사용되었는데, 이를 위해 광역 단일 Q 모델의 추계학적 지진동모델 파라미터 역산결과의 지진원과 부지효과 모델 파라미터 값을 이용해서 관측자료와 지진규모-거리-주파수-오차 분포가 동일한 스펙트럼 합성자료를 생성하였다. 수치검증을 위한 Q 블록 격자의 총 개수는 75개(내륙지역=69개(약 $35{\times}44km^2$의 격자크기); 해양지역=6개)로 설정하였으며, $Q_0f^{\eta}$ 함수형태의 Q 블록 값은 $Q_0$=100, 500, ${\eta}=0.0{\sim}1.0$의 분포를 갖도록 하고, 파선의 깊이는 별도로 고려하지 않았다. 스펙트럼 합성자료 생성에 이용된 모델파라미터의 정해와 모델파라미터의 역산결과를 비교하기 위한 checkerboard 수치검증은 3단계에 걸쳐 수행되었는데, 1단계는 블록별 Q의 초기값 추정 단계이며, 2단계는 관측소별 부지증폭함수를 추정하는 단계, 마지막 3단계에서는 최종적인 Q를 도출하는 단계이다. 관측소별 부지증폭함수의 초기 추정값으로는 기 분류된 관측소 등급에 대한 평균 부지증폭함수(연관희, 서정희, 2007)가 사용되었으며, 3단계의 checkerboard 수치검증 결과 최종적으로 추정된 부지효과 모델에는 오차가 발생하였으나 블록별 Q의 정해는 만족할 정도로 추정할 수 있었다.

• 대한관절경학회지
• /
• 제6권2호
• /
• pp.156-160
• /
• 2002

목적 : 전방 십자 인대 재건술시 동반된 반월상 연골의 파열에 대해 meniscus $arrow^{\circledR}$(BIONX, Tampere, Finland)를 이용한 봉합술의 치험예를 통하여 그 유용성에 대해 알아보고자 하였다. 재료 및 방법 : 1997년 5월부터 2000년 7월까지 전방십자인대 재건술과 함께 meniscus arrow를 이용하여 반월상 연골의 봉합술을 시행하고 추시가 가능하였던 17례를 대상으로 하였으며 추시 기간은 평균 18.5개월이었다. 손상 부위는 내측 12례, 외측 5례였고, 손상 형태는 전례에서 종 파열이었으며 red-rd 지역이 13례, red-white 지역이 4례였다. 술후 결과는 반월상 연골에 의한 증상(동통, 관절선 압통, 잠김, McMurray 검사)의 유무에 대해 알아보고 Marshall knee score를 이용하여 술전후 슬관절의 기능적 평가를 시행하였고 합병증에 대해서도 알아보았다. 결과 : 술후 2례에서 경도의 관절선 압통을 보였으나 관절 운동이나 체중 부하시 특별한 동통을 호소하지 않았으며 전례에서 잠김 증상이나 McMurray 검사는 음성이었다. 최종 추시점에서 Marshall knee scoring scale을 이용한 결과는 15례$(88\%)$에서 good 이상의 만족스러운 결과를 보였다. 합병증으로는 1례에서 술후 능동적 관절운동시 슬관절의 내측에 걸리는 느낌의 날카로운 통증을 호소하였으나 술후 6주에 소실되었다. 다른 1례에서 반월상 연골 밖으로 돌출된 arrow의 T-Head에 의한 대퇴골 연골 손상이 있었다. 결론 : 전방십자인대 재건술시 동반된 반월상 연골 손상, 특히 내측 반월상 연골의 후각부 파열에 대해 meniscus arrow를 이용한 봉합술도 하나의 치료방법이 될 수 있으나 연부조직 자극으로 인한 통증과 대퇴골 연골 손상이 발생될 수 있다는 것을 염두에 두어야할 것으로 생각된다.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 1999년도 추계학술발표회 초록집
• /
• pp.15-15
• /
• 1999

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the conventional rotating barrel. vibrational barrel (vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components, The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed that the average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value, Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components, However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. $2HD{\;}+{\;}e{\;}{\rightarrow}20H{\;}+{\;}H_2$ Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure thereby resulting to bad plating condition. 1 lot of chip was divided into two equal partion. Each portion was loaded to the same barrel one after the other. Nickel plating and tin-lead plating was performed in the same station. Portion A maintained the normal barrel vibration intensity and portion B vibration intensity was increased two steps higher. All other parameters, current, solution condition were maintained constant. Generally, plating method find procedures were carried out in a best way to maintained the best plating condition. After plating, samples were taken out from each portion. molded and polished. Plating thickness was investigated for both. To check consistency of results. 2nd trial was done now using different lot of another characteristics.

• 해양환경안전학회지
• /
• 제29권1호
• /
• pp.67-75
• /
• 2023

본 연구에서는 동명대학교 조선해양시뮬레이션센터의 Real-time 조종 및 작업 시뮬레이터를 활용한 해양구조물 설치 작업 시뮬레이션을 통해 대상의 동적 특성 및 물리적 현상을 작업, 조종 사이의 상호 영향과 함께 분석한다. 8개의 계류삭에 의해 계류되는 반잠수식 시추선의 설치 작업 시뮬레이션이 실제 현장에서의 작업과 유사한 시나리오로 수행되었고, 시추선의 위치 제어를 위한 예인선 4척와 계류삭의 Hook-up 작업을 위한 해양플랜트 지원 선박 1척이 운용되었다. 설치 작업이 수행되는 동안 대상들의 운동과 이동 경로, 계류삭 및 예인줄에 가해지는 장력 등을 실시간으로 확인하였으며, 이를 작업 과정별로 구분하여 분석하였다. 작업과 조종 시뮬레이션이 동시에 수행된 본 연구로부터 특정 환경 외력하에서 설치되는 해양구조물과 이를 위해 운용되는 선박들의 작업 절차에 따른 세부적인 거동 및 작업·조종 간의 상호 영향을 확인하였고, 이는 해상 상태 등을 고려한 해양구조물 설치 작업의 수행 가능 여부를 판단하기 위한 근거로 활용될 수 있음을 제시하였다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2009년도 추계학술발표대회
• /
• pp.6.2-6.2
• /
• 2009

Nanostructured materials arecurrently receiving much attention because of their unique structural andphysical properties. Research has been stimulated by the envisagedapplications for this new class of materials in electronics, optics, catalysisand magnetic storage since the properties derived from nanometer-scalematerials are not present in either isolated molecules or micrometer-scalesolids. This study presents the experimental results derived fromthe various functional materials processed in nano-scale using pulsed laserablation, since those materials exhibit new physical phenomena caused by thereduction dimensionality. This presentation consists of three mainparts to consider in pulsed laser ablation (PLA) technique; first nanocrystallinefilms, second, nanocolloidal particles in liquid, and third, nanocoating fororganic/inorganic hybridization. Firstly, nanocrystalline films weresynthesized by pulsed laser deposition at various Ar gas pressures withoutsubstrate heating and/or post annealing treatments. From the controlof processng parameters, nanocystalline films of complex oxides and non-oxidematerials have been successfully fabricated. The excellentcapability of pulsed laser ablation for reactive deposition and its ability totransfer the original stoichiometry of the bulk target to the deposited filmsmakes it suitable for the fabrication of various functionalmaterials. Then, pulsed laser ablation in liquid has attracted muchattention as a new technique to prepare nanocolloidal particles. Inthis work, we represent a novel synthetic approach to directly producehighly-dispersed fluorescent colloidal nanoparticles using the PLA from ceramicbulk target in liquid phase without any surfactant. Furthermore, novel methodbased on simultaneous motion tracking of several individual nanoparticles isproposed for the convenient determination of nanoparticle sizedistributions. Finally, we report that the GaAs nanocrystals issynthesized successfully on the surface of PMMA (polymethylmethacrylate)microspheres by modified PLD technique using a particle fluidizationunit. The characteristics of the laser deposited GaAs nanocrytalswere then investigated. It should be noted that this is the first successfultrial to apply the PLD process nanocrystals on spherical polymermatrices. The present process is found to be a promising method fororganic/inorganic hybridization.

• Journal of Korean Neurosurgical Society
• /
• 제38권2호
• /
• pp.102-106
• /
• 2005

Objective : The purposes of this study are to evaluate the efficacy of en bloc open-door laminoplasty and to investigate the validity of various factors as prognotic indicators in patients with multisegmental spondylotic myelopathy and ossification of posterior longitudinal ligament[OPLL]. Methods : The authors reviewed 43 cases in whom laminoplasty were performed for cervical myelopathy between January 2000 and December 2002. Clinical symptoms and results were evaluated using the Japanese Orthopaedic Association[JOA] scale. The recovery rate was calculated and then assessed for prognostic factors such as preoperative JOA scores, ages, history of previous trauma, duration of symptoms and signal change in cord on T2-weighted magnetic resonance Image. Results : In cervical stenosis, canal widening of antero-posterior diameter and dimension after laminoplasty is 4.16mm, $87.43mm^2$ and in OPLL is 6.20mm, $117.61mm^2$. In all cases there wasn't neurologic deterioration, mild postoperative complications developed in seven cases. Four patient had a limitation of range of neck motion and the other one showed kyphotic change and another two showed C5 radiculopathy. The recovery rate of JOA score in cervical stenosis and OPLL was 62% and 68% respectively. Duration of symptoms, the severity[preoperative JOA score], and signal change in cord on T2-weighted magnetic resonance image had close relationship to the clinical outcomes. Conclusion : Unilateral en bloc laminoplasty is simultaneous expansile and decompressive method. And preoperative JOA score, symptom duration and high signal intensity on T2-weighted magnetic resonance image can be used to predict prognosis.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.189-195
• /
• 1999

We have studied the vortex dynamics in YBa$_2Cu_3O_7$ single crystals with columnar defects using micro Hall-probe array. The Hall-probe array technique allowed a simultaneous measurement of the time and spatial dependence of the vortex density so that more detailed information on flux dynamics could be obtained. We found that field profiles inside sample were similar to the Bean's critical state model from the magnetic hysteresis measurement. Normalized relaxation rates were maximum near the center and decreased toward the edge if applied field H$_{app}$ is greater than the penetration field H. But applied magnetic field H$_{app}$ is less than H, relaxation rates were minimum near the center and increased toward edge. We found that glassy exponent ${\mu}$ has the value of ${\sim}$ 1 whose corresponding vortex motion is half-loop excitation. However, single vortex creep, ${\mu}$ ${\sim}$ 1/7, was also found at 30 K and H$_{app}$ ${\cong}$ H'. Calculation of activation energy, U, was possible from direct analysis of the local relaxation data using the basic diffusion equation. From these results, we found that U increases logarithmically with time and U around center was lower than that at the edge.

• 전자공학회논문지
• /
• 제51권9호
• /
• pp.139-147
• /
• 2014

본 논문에서는 다중객체 검출과 동시에 추적을 수행하는 이중계층구조의 파티클 샘플링을 제안한다. 제안된 방법은 다중 객체 검출을 위한 상위 계층 파티클 샘플링과 검출된 객체의 추적을 위한 하위 계층 파티클 샘플링으로 구성된다. 상위 계층에서는 빠른 객체 검출을 위해 슬라이딩 윈도우 대신 움직임 추정 기반의 부모 파티클 (parent particles; PP) 윈도우를 사용하여, 이동 객체 주위로 리샘플링된 파티클을 통해 객체를 검출한다. 하위 계층에서는 상위 계층에서 검출한 객체의 객체영역에 자식 파티클 (child particles; CP)을 생성하여 해당 객체를 추적한다. 실험결과를 통해 비디오 시스템에서 기존 객체 검출 방법보다 빠른 검출이 가능하고, 다중 객체를 효과적으로 추적할 수 있음을 확인하였다.