• Analytical Science and Technology
• /
• v.28 no.2
• /
• pp.112-116
• /
• 2015

Extraction of quaternary ammonium compounds (choline and betaine) from plant samples (spinach) using ion exchange resin (AG1, OH⁻ form) is a very simple and inexpensive approach. However, it is very hard to determine amounts of choline and betaine simultaneously using high-performance liquid chromatography-ultraviolet (HPLC-UV) detection. Unlike choline, betaine has low molar absorptivity in UV-visible (UV-Vis) region, which makes it difficult to carry out UV-Vis detection of betaine. The mixture of quaternary ammonium compounds (choline and betaine) was derivatized using 2-bromo acetophenone as a derivatizing agent. As a result, choline did not react with the derivatizing agent, whereas betaine formed a betaine derivative. This betaine derivative exhibited detectable UV absorption with baseline separation between choline and the betaine derivative. Thus, with this method, choline and betaine can be determined simultaneously by using the HPLCUV method through one-step derivatization, which is an easy, sensitive, and reliable method.

• Journal of environmental and Sanitary engineering
• /
• v.3 no.2 s.5
• /
• pp.99-106
• /
• 1988

In order to analyze trace metals by Atomic absorption spectrophotometer in infant formula milk powder, Wet digestion method using nitric acid, perchloric acid mainly and D.D.T.C.-M.I.B.K. extraction method were done. The r-value of calibration curve were more than 0.999 in Cu, Mn, Zn. Recovery test showed high recovery rate of $97-104\%$. The results were as follows: Averages of total samples were Cu $1.92\pm1.24 ppm,\;Mn\;1.18\pm1.01ppm,\;Zn\;22.43\pm8.88ppm.$ Averages of Common Infant formula were Cu1.96\pm1.26ppm,\;Mn\;1.0\pm0.57ppm,\;Zn\;21.52\pm9.72ppm.$ Averages of follow-up infant formula were Cu$1.89\pm1.26ppm,\;Mn\;1.36\pm1.31ppm,\;Zn\;23.34\pm8.7 ppm$.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2004.04a
• /
• pp.350-353
• /
• 2004

This study was conducted for a rapid and simple method using GC/FID and SPME to dectermin gasonline and chlorinated solvents simultaneity. A sodium chloride concentration of 25%(vol/w) combined with such as magnetic stirried, an absorption time of 20min, an extraction temperature of 4$0^{\circ}C$, the volume of minimized 50mL of gaseous phase and a desorption time of 5min pleprovided the greatest sensitivity while maintaining analytical efficiency. Analytical parameter such as linearity was also evaluated. The linear range extend from 30 to 500ppb. The results of chlorinated solvents and gasoline mixed samples showed that solvents have been completely removed from the sample preparation step and more accurated than those obtained by the other methods.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.03a
• /
• pp.62-70
• /
• 2004

Interaction between fluid flow and thermal radiation has received considerable attention due to its numerous applications in engineering field. In this case the thermofluid properties of radiating fluid vary with the variation of temperature field caused by absorption and emission of radiant heat. To analyze the radiation heat transfer in radiating fluid, the simultaneous solution of the radiative transfer equation (RTE) and the fluid dynamics equations is required. This means that the numerical procedure used for the RTE must be computationally efficient to permit its inclusion in the other submodels, and must be compatible with the other transport equations. The finite volume method (FVM) and the discrete ordinates method (DOM) are usually employed to simulate radiation problems in generalized coordinates. These two representative methods are examined and compared, especially in view of the numerical integration of the radiation intensity over solid angle. The FVM shows better accuracy than the DOM owing to less constraints of the selection of control angle.

• Nuclear Engineering and Technology
• /
• v.6 no.3
• /
• pp.161-169
• /
• 1974

Radiation grafting of acrylic acid onto nylon fabric has been studied by "simultaneous irradiation" method to render its surface more hydrophilic. Nylon fabric immersed in monomer solution was irradiated in air or under vacuum with gamma-rays from Co-60. Most parts of polyacrylic acid formed on the surface of the fabric were extracted off from the fabric with 0.1% solution of sodium hydroxide at 10$0^{\circ}C$. The chemical components of the grafted product have been determined. By comparing graft polymer with ungrafted polyamide, the rate of water absorption and antistatic behavior are improved. improved.

• Journal of Applied Biological Chemistry
• /
• v.43 no.2
• /
• pp.94-100
• /
• 2000

An analytical method was developed to determine abamectin and milbemectin residues in apple, pear, and citrus using HPLC with ultraviolet absorption detection. Abamectin and milbemectin were extracted with methanol from apple, pear, and citrus samples. The extract was diluted with saline water and dichloromethane partition was followed to recover the compounds from the aqueous phase. Florisil column chromatography and aminopropyl solid-phase extraction were employed as cleanup methods to remove most of co-extractives from the sample extract. Reverse-phase HPLC using an octadecylsilyl column was successfully applied to separate and quantitate abamectin and milbemectin residues in sample extracts at the wavelength of 245 nm. Recoveries of abamectin and milbemectin from fortified samples ranged 80.4~90.3% and 90.9~96.8%, respectively. Relative standard deviations of the analytical method were less than 10% for both acaricides. Detection limit of the analytical method was 0.003 mg/kg sample for all the analytes. The proposed method was reproducible and sensitive enough to evaluate terminal residues of abamectin and milbemectin in apple, pear, and citrus.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.3
• /
• pp.414-421
• /
• 1999

Falling film rectification involves simultaneous heat and mass transfer between vapor and liquid interface. In the present work, the adiabatic rectification process of ammonia-water vapor on the vertical plate was investigated. The continuity, momentum, energy and diffusion equations for the solution film and vapor mixture were formulated in integral forms and solved numerically. The model could predict the film thickness, the pressure gradient, and the mass transfer rate. The effects of Reynolds number and ammonia concentration of solution and vapor mixture, rectifier length, and the enhancement of mass transfer in each phases were investigated. The stripping of water in vapor mixture occurred new the entrance of ammonia solution, which imposed the proper size of an adiabatic rectifier. Rectifier efficiency increased as film Reynolds number increased and as vapor mixture Reynolds number decreased. The improvement of rectifier efficiency was significant with the enhancement of mass transfer in falling film.

• International Journal of Air-Conditioning and Refrigeration
• /
• v.8 no.2
• /
• pp.69-79
• /
• 2000

Falling film rectification involves simultaneous heat and mass transfer between vapor and solution film. In the present work, the adiabatic rectification process of ammonia-water vapor by the falling solution film on the vertical plate was investigated. The continuity momentum, energy and diffusion equations for the solution film and the vapor mixture were formulated in integral forms and solved numerically, The model could predict the film thickness, the pressure gradient, and the mass transfer rate. The effects of Reynolds number and ammonia concentration of solution and vapor mixture, rectifier length, and the enhancement of mass transfer coefficient in each phases were investigated. The stripping of water in vapor mixture occurred near the entrance of ammonia solution, which imposed the proper size of an adiabatic rectifier. Rectifier efficiency increased as film Reynolds number increased and as vapor mixture Reynolds number decreased. The improvement of rectifier efficiency was significant with the enhancement of mass transfer coefficient in falling film.

• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.417-421
• /
• 2015

We analyzed 0.5-45 keV data of NGC 3227 observed by Suzaku six times between 2008 October 28 and December 2. The count-count plot between the 0.5-3 keV and 3-10 keV bands exhibits a clear break, separating the data into bright and faint phases. Applying the difference spectrum method and time-averaged spectral fits to the phase data, we found the presence of two kinds of variable primary X-rays, (1) a hard primary component with ${\Gamma}{\sim}1.7$ dominating in the faint phase and (2) a soft primary continuum with ${\Gamma}{\sim}2.4$ appearing in the bright phase, both affected by partial absorption. Considering their timing and spectral characteristics, component (1) is presumably identical to a Compton continuum in the low/hard state, while component (2) may correspond to the hard tail emission in the high/soft state, or compact-jet emission. In that case, an accretion ow onto the central super massive black hole in NGC 3227 can be interpreted to include the two different states.

• Korean Journal of Food Science and Technology
• /
• v.11 no.3
• /
• pp.166-170
• /
• 1979

A rapid and simple method for detecting chemical preservatives was attempted on the basis of emitted fluorescence at the illumination of UVSL-25 mineral light. Absorption and fluorescence spectra of powdered samples dispersed in liquid paraffin revealed characteristic patterns depending on chemical preservatives. Detection of chemical preservatives was more readily accomplished by simultaneous comparison of spectral characteristics at long and short wave ranges of the exciting light.