• Title/Summary/Keyword: Simulator Experiment

Search Result 431, Processing Time 0.028 seconds

A study on driver experience to railway crossings in driving simulator (차량 시뮬레이터를 이용한 철도건널목 운전행태에 관한 연구)

  • Kim, Inhi;Lee, Seonha
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.13 no.2
    • /
    • pp.57-67
    • /
    • 2014
  • In the last decade, various situations were simulated through virtual environment due to rapid improvement of computer capability and technology. Transportation engineering also has adopted the virtual environment facility in order to identify drivers behaviour under various circumstances. This study aims to evaluate driver reactions to the introduction of new ITS interventions at railway crossings (RLX) in driving simulator. Three ITS safety devices were used to figure out how drivers reacted to them. In addition, a survey was conducted to find participants' work load and acceptance of the technology. The ultimate purpose of this paper is to evaluate ITS safety devices in various aspects. Each participant made 3 runs (2 baselines, 1 ITS randomly) for approximately 20 minutes each. The participants answered that current railway crossings did not look safe prior to experiment. They responded that the use of ITS technologies were easy and the technologies were more effective on passive railway crossings.

Electrostatic Discharge Experiment for Smartphone Battery Protection Circuit Module (스마트폰 배터리 보호회로 모듈에 대한 정전기 방전 실험)

  • Yoo, Jong-Gyeong;Park, Kyung-Je;Jeon, Seong-Hyeok;Yeo, Junho;Cho, Young-Ki;Lee, Dae-Heon;Kim, Jong-Kyu
    • Proceedings of the Korean Institute of Information and Commucation Sciences Conference
    • /
    • 2017.10a
    • /
    • pp.53-54
    • /
    • 2017
  • In this paper, we have studied the electrostatic discharge test for the battery protection circuit module in the lithium ion battery used as a smartphone battery which is used to prevent the explosion hazard due to overcharge, over discharge, and short-circuit. A lithium ion battery of S company was used as an experimental sample, and an ESD gun simulator compliant with IEC 61000-4-2 standard was used for electrostatic discharge injection. The contact discharge was applied to the various pins of the battery protection circuit module in increments of 2 kV in the range of 2 kV to 10 kV and in 5 kV increments in the range of 10 kV to 30 kV.

  • PDF

Experimental Study on Minimum Distance between Tunnel and Interchange by Driving Simulator (터널 - IC 분기점간 최소이격거리 연구)

  • Lee, Jong-Hak;Noh, Kwan-Sub;Kim, Jong-Min
    • International Journal of Highway Engineering
    • /
    • v.11 no.1
    • /
    • pp.37-45
    • /
    • 2009
  • The minimum distance between tunnel and interchange has several steps to go through for road users; when road user comes out of tunnel, he/she reads information on road sign and tries to change the lane, and then reaches the destination (interchange). So that's why that minimum distance between tunnel and interchange has to be designed to reflect human factors sufficiently for road's users. This study aims to set for minimum distance between tunnel and interchange with involved human factors. People aged from their twenties to their seventies took part in this experiment by using driving simulator. As a result, the minimum distance between them was loom long. When it comes to this study for minimum distance between tunnel and interchange, this study will be significant in some ways reason why this method can be applied to all road facilities for road safety on scientific basis. In the near future, It will make a recommendation concerning the most suitable data for road safety by contributing better guideline.

  • PDF

A study of Drivers' Behaviors using a Driving Simulator(with Special Reference of Driving Anger and Traffic Congestion (차량 시뮬레이터를 이용한 운전행동 연구(운전분노 및 교통정체를 중심으로))

  • Song, Hye-Su;Sin, Yong-Gyun;Gang, Su-Cheol
    • Journal of Korean Society of Transportation
    • /
    • v.23 no.2
    • /
    • pp.61-74
    • /
    • 2005
  • This study is to investigate the effects of driving anger and traffic congestion on drivers' behaviors. Driving anger is the propensity to become angry while driving, and people differ in the tendency to get angry when encountering frustration and provocation on the road. Individual differences of the propensity contribute to anger on the road and aggressive driving leading traffic vaiolations and accidents. In the experiment three traffic conditions (an open road condition, a bumper-to-bumper traffic condition and a being stuck behind a slower driver condition) were simulated and driving behaviors were collected with RTSA-DS(Road Traffic Safety Authority-Driving Simulator). The results were as follows: Most of high anger drives drove at higher speeds in an open road condition, and in the bumper-to-bumper condition they drove faster and had an higher crash rate, which suggests they did aggressive driving, and risky and unsafe behaviors.

Analysis of Maximum Power Generation of Photovoltaic Module Depending on Constituent Materials and Incident Light Characteristics (구성 재료와 방사조도 특성에 따른 태양전지모듈의 최대출력 분석)

  • Kang, Gi-Hwan;Kim, Kyung-Soo;Park, Chi-Hong;Yu, Gwon-Jong;Ahn, Hyung-Keun;Han, Deuk-Young
    • Journal of the Korean Solar Energy Society
    • /
    • v.27 no.3
    • /
    • pp.1-6
    • /
    • 2007
  • In this study, we analyze the maximum power generation of photovoltaic(PV) module depending on constituent materials and incidence angle dependence of light. To verify characteristics of constituent materials, we made photovoltaic modules with 4 kinds of solar cells and textured glass according to fabrication method. To find the degree of the maximum power generation dependence on intensity of light, Solar Simulator is applied by changing angle of module and light intensity. Through this experiment, to obtain maximum power generation from limited PV modules, it is needed to fully understand constituent materials, fabrication method and dependence of incident light characteristics.

A Steering Wheel Angle Analysis of Old and Young Drivers in Right Turning at Intersection

  • Ryu, Tae-Beum;Min, Byung-Chan
    • Journal of the Ergonomics Society of Korea
    • /
    • v.30 no.2
    • /
    • pp.285-290
    • /
    • 2011
  • Due to the ageing-related degradation in physical and cognitive abilities, the elderly have difficulty in car driving and this is related to the high rate of car accidents among them. This study investigated the kinematic characteristics of old drivers' steering in right turning at intersections by comparing with young drivers. Thirteen old(60~70) and thirteen young(20~30) drivers who participated in the experiment turned their cars right side at intersections in a driving simulator. As results, the completion time of right turning at intersection of old drivers was larger than that of young drivers. The speeds of vehicle at the beginning and ending point of the right turning area of old drivers were smaller than those of young drivers, and also the steering angle at the ending point of the turning area of the former was smaller than that of the latter. The normalized jerk of old driver's steering was significantly larger than that of young drivers. These results indicate that old drivers modify their steering movement repeatedly and take the driving strategy of avoiding risks due to their reduced physical capabilities.

Behavioral Adaptation to an Adaptive Cruise Control System (적응순항제어시스템의 운전자 행동적응)

  • Lee, Woon-Sung;Kim, Young-Suk
    • Transactions of the Korean Society of Automotive Engineers
    • /
    • v.14 no.6
    • /
    • pp.82-88
    • /
    • 2006
  • The study investigated how an adaptive cruise control system induced behavioral adaptation in drivers using a full-scale driving simulator. Forty drivers with different driving styles participated in the study to compare headway-time, vehicle lateral position variation, and head and eye movement when driving with and without the adaptive cruise control system. Results showed that system induced positive behavioral adaptation by drawing consistency in driving speed and headway-time regardless of the driving styles. However, the results also showed that the drivers' reliance on the system induced negative adaptation including reduced lane keeping ability and reduced attention during driving. As a strategy to prevent negative adaptation, the study proposed information service to drivers with the adaptive cruise control system status and driving environment, and investigated effectiveness of the service. Twelve drivers participated in the experiment to compare headway-time, vehicle lateral position variation and subjective ratings when driving with and without the information service. Results showed that the information service assisted the drivers to maintain safer and more comfortable headway-time without impairing drivers' steering ability.

Performance Comparison between Localized and Non-Localized Brain Wave Monitoring Network Topology in the Medical Hospital Area (의료병원구역의 지역화와 비지역화된 뇌파 감시망 토폴로지의 성능비교)

  • Jo, Jun-Mo
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.11 no.9
    • /
    • pp.917-922
    • /
    • 2016
  • There are many researches related on the brain wave signals to monitor the state of human health. Especially, some patients in the medical hospital need to be monitored in case of emergencies such as a seizure, an epilepsy and so on. To support QoS of the brain wave network in the hospital is a vital issue and the Opnet simulator is used for this experiment. So the efficient network topology is required for the stability of the brain wave network service. The brain waves of the patients are collected from the sensor devices in the network. Two different sensor network topologies are suggested and simulated for the comparison of the network performance. One topology is localized and the other is non-localized network. The simulation is operated with the Opnet simulator.

Design and Manufacture of U-shaped Antenna for WLAN/WiMAX Applications (WLAN/WiMAX 시스템에 적용 가능한 U-형 안테나 설계 및 제작)

  • Im, Dae-Soo;Choi, Young-Kyu;Yoon, Joong-Han
    • The Journal of the Korea institute of electronic communication sciences
    • /
    • v.9 no.7
    • /
    • pp.827-834
    • /
    • 2014
  • In this paper, a triple-band U-shaped monopole antenna with T-shaped stub for WLAN(Wireless Local Area Networks)/WiMAX(World interoperability for Microwave Access) applications. The proposed antenna is based on a planar monopole design, and composed of U-shaped of radiating patch, T-shaped strip in U-shaped, for triple-band operation. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator(HFSS) and found the parameters that greatly effect antenna characteristics. Using the obtained parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. And characteristics of gain and radiation patterns are determined for WLAN/WiMAX application.

Design and Manufacture of CPW-fed Two Arc-shaped Antenna for WLAN Applications (WLAN 시스템을 위한 두 개 원호 형태 안테나의 설계와 제작)

  • Yoon, Joong-Han
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.19 no.4
    • /
    • pp.765-771
    • /
    • 2015
  • In this paper, a dual-band arc-shaped monopole antenna for WLAN(Wireless Local Area Networks) applications. The proposed antenna is based on CPW-fed structure, and composed of two-arc shaped of radiating patch and ground plane. To obtain the optimized parameters, we used the simulator, Ansoft's High Frequency Structure Simulator (HFSS) and found the parameters that greatly effect antenna characteristics. Using optimal parameters, the antenna is fabricated. The numerical and experiment results demonstrated that the propnosed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN bands. And measured results of gain and radiation patterns characteristics displayed determined for opeating bands.